[RFC PATCH v2 04/13] i2c: add nexell driver

[Stefan B.]

Hi Heiko,

I assume that patchwork does get the patch-series automatically when I 
send it to u-boot at lists.denx.de, or am I wrong? Perhaps it is in some 
pipeline?

At least the patch-series appeared in U-Boot Digest ("[RFC PATCH v2 
04/13] i2c: add nexell driver" is in Vol 142, Issue 58).


Regards
Stefan

Am 08.04.20 um 06:08 schrieb Heiko Schocher:
> Hello Stefan,
> 
> Am 28.03.2020 um 10:43 schrieb Stefan Bosch:
>> Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
>> - i2c/nx_i2c.c: Some adaptions mainly because of changes in
>>    "struct udevice".
>> - several Bugfixes in nx_i2c.c.
>> - the driver has been for s5p6818 only. Code extended appropriately
>>    in order s5p4418 is also working.
>> - "probe_chip" added.
>>
>> Signed-off-by: Stefan Bosch <stefan_b at posteo.net>
>> ---
>>
>> Changes in v2:
>> - commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted
>>    into separate commits for gpio, i2c, mmc, pwm.
>> - several Bugfixes in nx_i2c.c.
>> - the i2c-driver has been for s5p6818 only. Code extended approriately
>>    in order s5p4418 is also working.
>> - "probe_chip" added to the i2c-driver.
>> - doc/device-tree-bindings/i2c/nx_i2c.txt added.
>>
>>   doc/device-tree-bindings/i2c/nx_i2c.txt |  28 ++
>>   drivers/i2c/Kconfig                     |   9 +
>>   drivers/i2c/Makefile                    |   1 +
>>   drivers/i2c/nx_i2c.c                    | 649 
>> ++++++++++++++++++++++++++++++++
>>   4 files changed, 687 insertions(+)
>>   create mode 100644 doc/device-tree-bindings/i2c/nx_i2c.txt
>>   create mode 100644 drivers/i2c/nx_i2c.c
> 
> I do not find this patch in patchwork ...
> 
> Thanks for splitting the big patch into several patches.
> 
> Reviewed-by: Heiko Schocher <hs at denx.de>
> 
> bye,
> Heiko