[PATCH] xilinx: Introduce board_late_init_xilinx()
Michal Simek
michal.simek at xilinx.com
Wed Apr 8 10:50:10 CEST 2020
This function should keep common shared late configurations for Xilinx
SoCs.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
board/xilinx/common/board.c | 8 ++++++++
board/xilinx/common/board.h | 12 ++++++++++++
board/xilinx/versal/board.c | 5 ++---
board/xilinx/zynq/board.c | 5 ++---
board/xilinx/zynqmp/zynqmp.c | 5 ++---
5 files changed, 26 insertions(+), 9 deletions(-)
create mode 100644 board/xilinx/common/board.h
diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index e83c692f2174..7c191e53fb71 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -8,6 +8,7 @@
#include <asm/sections.h>
#include <dm/uclass.h>
#include <i2c.h>
+#include "board.h"
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
@@ -71,3 +72,10 @@ void *board_fdt_blob_setup(void)
return NULL;
}
#endif
+
+int board_late_init_xilinx(void)
+{
+ env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+
+ return 0;
+}
diff --git a/board/xilinx/common/board.h b/board/xilinx/common/board.h
new file mode 100644
index 000000000000..180dfbca1082
--- /dev/null
+++ b/board/xilinx/common/board.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2020 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ */
+
+#ifndef _BOARD_XILINX_COMMON_BOARD_H
+#define _BOARD_XILINX_COMMON_BOARD_H
+
+int board_late_init_xilinx(void);
+
+#endif /* BOARD_XILINX_COMMON_BOARD_H */
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index 75aedb092922..908ea87163f8 100644
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -17,6 +17,7 @@
#include <dm/uclass.h>
#include <versalpl.h>
#include <linux/sizes.h>
+#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -204,9 +205,7 @@ int board_late_init(void)
initrd_hi = round_down(initrd_hi, SZ_16M);
env_set_addr("initrd_high", (void *)initrd_hi);
- env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
- return 0;
+ return board_late_init_xilinx();
}
int dram_init_banksize(void)
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 420a5ca66311..2164eac8d518 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -17,6 +17,7 @@
#include <zynqpl.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
+#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -76,9 +77,7 @@ int board_late_init(void)
env_set("boot_targets", new_targets);
- env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
- return 0;
+ return board_late_init_xilinx();
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 3c92b1a5825f..b2172356ad0a 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -27,6 +27,7 @@
#include <zynqmp_firmware.h>
#include <g_dnl.h>
#include <linux/sizes.h>
+#include "../common/board.h"
#include "pm_cfg_obj.h"
@@ -695,11 +696,9 @@ int board_late_init(void)
initrd_hi = round_down(initrd_hi, SZ_16M);
env_set_addr("initrd_high", (void *)initrd_hi);
- env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
-
reset_reason();
- return 0;
+ return board_late_init_xilinx();
}
#endif
--
2.26.0
More information about the U-Boot
mailing list