[PATCH] xilinx: Enable MTD and UBIFS for zynq and zynqmp

[Michal Simek]

st 8. 4. 2020 v 10:39 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Both of them have nand controller that's why it is good to enable it
> because these configurations are also covered by testing.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  configs/xilinx_zynq_virt_defconfig   | 5 +++++
>  configs/xilinx_zynqmp_virt_defconfig | 5 +++++
>  2 files changed, 10 insertions(+)
>
> diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
> index 54cbd3e12b65..6af4565451a9 100644
> --- a/configs/xilinx_zynq_virt_defconfig
> +++ b/configs/xilinx_zynq_virt_defconfig
> @@ -32,12 +32,17 @@ CONFIG_CMD_FPGA_LOADP=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> +CONFIG_CMD_MTD=y
>  CONFIG_CMD_NAND_LOCK_UNLOCK=y
>  CONFIG_CMD_USB=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TFTPPUT=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_CMD_MTDPARTS_SPREAD=y
> +CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
> +CONFIG_CMD_UBI=y
>  CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
>  CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
>  CONFIG_ENV_IS_IN_SPI_FLASH=y
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index 45360f873134..279483f1cb7b 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -40,6 +40,7 @@ CONFIG_CMD_GPIO=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> +CONFIG_CMD_MTD=y
>  CONFIG_CMD_NAND_LOCK_UNLOCK=y
>  CONFIG_CMD_POWEROFF=y
>  CONFIG_CMD_SDRAM=y
> @@ -50,6 +51,10 @@ CONFIG_CMD_TFTPPUT=y
>  CONFIG_CMD_TIME=y
>  CONFIG_CMD_TIMER=y
>  CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_CMD_MTDPARTS_SPREAD=y
> +CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
> +CONFIG_CMD_UBI=y
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
>  CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA"
> --
> 2.26.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs