[PATCH] imx: Fix imx8m FIT script issue

[Ye Li]

The FIT config node has reversed ATF and u-boot: ATF is set to
firmware but u-boot is set to loadable.
This script can work previously because spl fit driver wrongly
appends fdt to all loadable images. With the issue fixed, the u-boot
in loadable does not have fdt appended and fails to work.
So correct script by moving u-boot to firmware and ATF to loadable.

Signed-off-by: Ye Li <ye.li at nxp.com>
---
 arch/arm/mach-imx/mkimage_fit_atf.sh | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh
index ad81d5e..dd1ca5a 100755
--- a/arch/arm/mach-imx/mkimage_fit_atf.sh
+++ b/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -116,8 +116,8 @@ if [ -f $BL32 ]; then
 cat << __CONF_SECTION_EOF
 		config@$cnt {
 			description = "$(basename $dtname .dtb)";
-			firmware = "atf at 1";
-			loadables = "uboot at 1", "tee at 1";
+			firmware = "uboot at 1";
+			loadables = "atf at 1", "tee at 1";
 			fdt = "fdt@$cnt";
 		};
 __CONF_SECTION_EOF
@@ -125,8 +125,8 @@ else
 cat << __CONF_SECTION1_EOF
 		config@$cnt {
 			description = "$(basename $dtname .dtb)";
-			firmware = "atf at 1";
-			loadables = "uboot at 1";
+			firmware = "uboot at 1";
+			loadables = "atf at 1";
 			fdt = "fdt@$cnt";
 		};
 __CONF_SECTION1_EOF
-- 
2.7.4