[RFC PATCH] net, qe: add DM support for QE UEC ethernet

[Priyanka Jain]

>-----Original Message-----
>From: Heiko Schocher <hs at denx.de>
>Sent: Thursday, April 9, 2020 10:49 AM
>To: Priyanka Jain <priyanka.jain at nxp.com>
>Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Holger Brunck
><holger.brunck at ch.abb.com>; Joe Hershberger <joe.hershberger at ni.com>;
>Mario Six <mario.six at gdsys.cc>; Qiang Zhao <qiang.zhao at nxp.com>
>Subject: Re: [RFC PATCH] net, qe: add DM support for QE UEC ethernet
>
>Hello Priyanka,
>
>Am 18.02.2020 um 10:05 schrieb Heiko Schocher:
>> add DM/DTS suppor for the UEC ethernet on QUICC Engine Block.
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>> ---
>> Travis build:
>>
>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrav
>> is-ci.org%2Fhsdenx%2Fu-boot-
>test%2Fbuilds%2F651400509&data=02%7C01
>>
>%7Cpriyanka.jain%40nxp.com%7C51477945d03e4b72383708d7dc458e7e%7C
>686ea1
>>
>d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637220063612750872&sdat
>a=oV%2
>> BTyCsoQF17s4aQ1OGEIcMXWjB%2BhpiPunefUNtD6Fs%3D&reserved=0
>>
>> - I let the old none DM based implementation in code
>>    so boards should work with old implementation.
>>    This Code should be removed if all boards are converted
>>    to DM/DTS.
>>
>> - add the DM based qe uec driver under drivers/net/qe
>>
>> - Therefore copied the files uccf.c uccf.h uec.h from
>>    drivers/qe. So there are a lot of Codingstyle problems
>>    currently. I fix them in next version if this RFC
>>    patch is OK or it needs some changes.
>>
>> - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c
>>    Used a lot of functions from drivers/qe/uec.c
>>
>> - seperated the PHY specific code into seperate file
>>    drivers/net/qe/dm_qe_uec_phy.c
>>
>>
>>   drivers/net/Kconfig            |    2 +
>>   drivers/net/Makefile           |    1 +
>>   drivers/net/qe/Kconfig         |    9 +
>>   drivers/net/qe/Makefile        |    5 +
>>   drivers/net/qe/dm_qe_uec.c     | 1161
>++++++++++++++++++++++++++++++++
>>   drivers/net/qe/dm_qe_uec.h     |   22 +
>>   drivers/net/qe/dm_qe_uec_phy.c |  161 +++++
>>   drivers/net/qe/uccf.c          |  388 +++++++++++
>>   drivers/net/qe/uccf.h          |  117 ++++
>>   drivers/net/qe/uec.h           |  742 ++++++++++++++++++++
>>   drivers/qe/uccf.c              |    2 +
>>   drivers/qe/uec.c               |    2 +
>>   drivers/qe/uec_phy.c           |    3 +
>>   13 files changed, 2615 insertions(+)
>>   create mode 100644 drivers/net/qe/Kconfig
>>   create mode 100644 drivers/net/qe/Makefile
>>   create mode 100644 drivers/net/qe/dm_qe_uec.c
>>   create mode 100644 drivers/net/qe/dm_qe_uec.h
>>   create mode 100644 drivers/net/qe/dm_qe_uec_phy.c
>>   create mode 100644 drivers/net/qe/uccf.c
>>   create mode 100644 drivers/net/qe/uccf.h
>>   create mode 100644 drivers/net/qe/uec.h
>
>Any comments?
>
>Thanks!
>
>bye,
>Heiko
Qiang Zhao is NXP Software IP expert for QE.  I am taking his help in review.

Thanks
Priyanka
>--
>DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de