[PATCH v2] configs: ls1021a: Append CMA configuration to bootargs

Alison Wang alison.wang at nxp.com
Thu Apr 23 16:37:34 CEST 2020


The default reserved memory for CMA is high memory. If LPAE is enabled,
highmem pages are non-remapped and can not be used with
dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A.
This patch appends the related CMA configuration to bootargs.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
Signed-off-by: Alison Wang <alison.wang at nxp.com>
---
Change in v2:
   - Update the comment.

 include/configs/ls1021atwr.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a6289850ca..45ce460dca 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,7 +297,8 @@
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
-	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "	\
+		"cma=64M at 0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
@@ -353,7 +354,8 @@
 		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 "	\
+		"cma=64M at 0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
-- 
2.17.1



More information about the U-Boot mailing list