[PATCH] clk: stm32mp1: fix CK_MPU calculation

[Patrick Delaunay]

From: Lionel Debieve <lionel.debieve at st.com>

When the CK_MPU used PLL1_MPUDIV, the current rate is
wrong. The clock must use stm32mp1_mpu_div as a shift
value. Fix the check value used to enter PLL_MPUDIV.

Signed-off-by: Lionel Debieve <lionel.debieve at st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 drivers/clk/clk_stm32mp1.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 50df8425bf..0d0ea43fd2 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -954,10 +954,11 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)
 		case RCC_MPCKSELR_PLL:
 		case RCC_MPCKSELR_PLL_MPUDIV:
 			clock = stm32mp1_read_pll_freq(priv, _PLL1, _DIV_P);
-			if (p == RCC_MPCKSELR_PLL_MPUDIV) {
+			if ((reg & RCC_SELR_SRC_MASK) ==
+			    RCC_MPCKSELR_PLL_MPUDIV) {
 				reg = readl(priv->base + RCC_MPCKDIVR);
-				clock /= stm32mp1_mpu_div[reg &
-							  RCC_MPUDIV_MASK];
+				clock >>= stm32mp1_mpu_div[reg &
+					RCC_MPUDIV_MASK];
 			}
 			break;
 		}
-- 
2.17.1