ZynqMP boot: no messages from SPL other than "Debug uart enabled"

Major A andras.g.major at gmail.com
Thu Apr 30 13:01:55 CEST 2020


Hi Michal,

Sorry I misunderstood your message, and I didn't spot the attached 
files.  Now I booted with those two files, there's no output on the 
UARTs whatsoever.  Is there anything else I can try?

Cheers,

   András


On 30/04/2020 12:33, Michal Simek wrote:
> Hi,
> 
> On 30. 04. 20 12:19, Major A wrote:
>> Hi Michal,
>>
>>> can you please try these files in SD boot mode?
>>
>> Done, here are two logs, both in SD boot mode.
>>
>> First, log.sd is with SD card inserted (with the image files that
>> apparently refuse to work other than the early UART message).
>>
>> The other file, log.no-sd, is with no card inserted.
> 
> we don't understand each other. I sent you boot.bin and image.itb. Just
> copy them to SD card, switch board to sd boot mode and power it up.
> 
> Thanks,
> Michal
> 


More information about the U-Boot mailing list