[PATCH v2 7/7] ddr: altera: arria10: Remove call to dram_init_banksize()

Ley Foon Tan lftan.linux at gmail.com
Thu Apr 30 13:02:26 CEST 2020


On Mon, Apr 20, 2020 at 4:46 PM Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>
> dram_init_banksize() is called in board_init_f() boot sequences
> in Uboot, remove it from SDRAM driver.
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
> ---
>  drivers/ddr/altera/sdram_arria10.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/drivers/ddr/altera/sdram_arria10.c b/drivers/ddr/altera/sdram_arria10.c
> index e4944ef95183..27fd393e6fe4 100644
> --- a/drivers/ddr/altera/sdram_arria10.c
> +++ b/drivers/ddr/altera/sdram_arria10.c
> @@ -660,9 +660,6 @@ static int ddr_calibration_sequence(struct altera_sdram_platdata *plat)
>         else
>                 gd->ram_size = (u32)size;
>
> -       /* setup the dram info within bd */
> -       dram_init_banksize();
> -
>         if (of_sdram_firewall_setup(gd->fdt_blob))
>                 puts("FW: Error Configuring Firewall\n");
>
Hi

Need to drop this patch, Found that dcache_enable() needs gd->bd->bi_dram[].
I will send v3.

Thanks.

Regards
Ley Foon


More information about the U-Boot mailing list