[PATCH v2 7/7] ddr: altera: arria10: Remove call to dram_init_banksize()

[Marek Vasut]

On 4/30/20 1:02 PM, Ley Foon Tan wrote:
> On Mon, Apr 20, 2020 at 4:46 PM Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>>
>> dram_init_banksize() is called in board_init_f() boot sequences
>> in Uboot, remove it from SDRAM driver.
>>
>> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
>> ---
>>  drivers/ddr/altera/sdram_arria10.c | 3 ---
>>  1 file changed, 3 deletions(-)
>>
>> diff --git a/drivers/ddr/altera/sdram_arria10.c b/drivers/ddr/altera/sdram_arria10.c
>> index e4944ef95183..27fd393e6fe4 100644
>> --- a/drivers/ddr/altera/sdram_arria10.c
>> +++ b/drivers/ddr/altera/sdram_arria10.c
>> @@ -660,9 +660,6 @@ static int ddr_calibration_sequence(struct altera_sdram_platdata *plat)
>>         else
>>                 gd->ram_size = (u32)size;
>>
>> -       /* setup the dram info within bd */
>> -       dram_init_banksize();
>> -
>>         if (of_sdram_firewall_setup(gd->fdt_blob))
>>                 puts("FW: Error Configuring Firewall\n");
>>
> Hi
> 
> Need to drop this patch, Found that dcache_enable() needs gd->bd->bi_dram[].
> I will send v3.

OK, thanks.