[PATCH 29/34] configs: sama7g5: add mmc config for sdmmc0

Jaehoon Chung jh80.chung at samsung.com
Thu Dec 3 11:38:17 CET 2020


Hi,

On 12/3/20 6:28 PM, Eugen Hristev wrote:
> Add new config for storing environment from sdmmc0.
> Also clean-up sama7g5ek_emmc1 to point to the proper mmc device.

Just one question, Sorry, i didn't check entire patchset.

What is different between sama7g5ek_mmc1 and sama7g5ek_mmc?

Best Regards,
Jaehoon Chung

> 
> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
> ---
>  board/atmel/sama7g5ek/MAINTAINERS |  1 +
>  configs/sama7g5ek_mmc1_defconfig  |  7 ++--
>  configs/sama7g5ek_mmc_defconfig   | 67 +++++++++++++++++++++++++++++++
>  3 files changed, 72 insertions(+), 3 deletions(-)
>  create mode 100644 configs/sama7g5ek_mmc_defconfig
> 
> diff --git a/board/atmel/sama7g5ek/MAINTAINERS b/board/atmel/sama7g5ek/MAINTAINERS
> index f66953ac4e..eac972968d 100644
> --- a/board/atmel/sama7g5ek/MAINTAINERS
> +++ b/board/atmel/sama7g5ek/MAINTAINERS
> @@ -4,4 +4,5 @@ S:     Maintained
>  F:     board/atmel/sama7g5ek.c
>  F:     include/configs/sama7g5ek.h
>  F:     configs/sama7g5ek_mmc1_defconfig
> +F:     configs/sama7g5ek_mmc_defconfig
>  
> diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig
> index fa4c88ffa6..b6d2f4dd05 100644
> --- a/configs/sama7g5ek_mmc1_defconfig
> +++ b/configs/sama7g5ek_mmc1_defconfig
> @@ -2,9 +2,10 @@ CONFIG_ARM=y
>  CONFIG_ARCH_AT91=y
>  CONFIG_SYS_TEXT_BASE=0x66f00000
>  CONFIG_TARGET_SAMA7G5EK=y
> -CONFIG_NR_DRAM_BANKS=1
>  CONFIG_SYS_MALLOC_F_LEN=0x11000
> +CONFIG_NR_DRAM_BANKS=1
>  CONFIG_ENV_SIZE=0x4000
> +CONFIG_DM_GPIO=y
>  CONFIG_DEBUG_UART_BOARD_INIT=y
>  CONFIG_DEBUG_UART_BASE=0xe1824200
>  CONFIG_DEBUG_UART_CLOCK=200000000
> @@ -14,6 +15,7 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
>  CONFIG_FIT=y
>  CONFIG_SD_BOOT=y
>  CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
>  CONFIG_MISC_INIT_R=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_CMD_BOOTZ=y
> @@ -35,6 +37,7 @@ CONFIG_CMD_EXT4=y
>  CONFIG_CMD_FAT=y
>  CONFIG_OF_CONTROL=y
>  CONFIG_ENV_IS_IN_FAT=y
> +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_DM=y
>  CONFIG_CLK=y
> @@ -44,7 +47,6 @@ CONFIG_AT91_UTMI=y
>  CONFIG_AT91_GENERIC_CLK=y
>  CONFIG_AT91_SAM9X60_PLL=y
>  CONFIG_CPU=y
> -CONFIG_DM_GPIO=y
>  CONFIG_ATMEL_PIO4=y
>  CONFIG_DM_I2C=y
>  CONFIG_DM_MMC=y
> @@ -56,7 +58,6 @@ CONFIG_DM_ETH=y
>  CONFIG_MACB=y
>  CONFIG_PINCTRL=y
>  CONFIG_PINCTRL_AT91PIO4=y
> -# CONFIG_RAM_ROCKCHIP_DEBUG is not set
>  CONFIG_DM_SERIAL=y
>  CONFIG_DEBUG_UART_ANNOUNCE=y
>  CONFIG_ATMEL_USART=y
> diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig
> new file mode 100644
> index 0000000000..894a64983f
> --- /dev/null
> +++ b/configs/sama7g5ek_mmc_defconfig
> @@ -0,0 +1,67 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_AT91=y
> +CONFIG_SYS_TEXT_BASE=0x66f00000
> +CONFIG_TARGET_SAMA7G5EK=y
> +CONFIG_SYS_MALLOC_F_LEN=0x11000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x4000
> +CONFIG_DM_GPIO=y
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_BASE=0xe1824200
> +CONFIG_DEBUG_UART_CLOCK=200000000
> +CONFIG_DEFAULT_DEVICE_TREE="sama7g5ek"
> +CONFIG_DEBUG_UART=y
> +CONFIG_ENV_VARS_UBOOT_CONFIG=y
> +CONFIG_FIT=y
> +CONFIG_SD_BOOT=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"
> +CONFIG_MISC_INIT_R=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_SYS_MEMTEST_START=0x60000000
> +CONFIG_SYS_MEMTEST_END=0x70000000
> +CONFIG_CMD_STRINGS=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_ENV_IS_IN_FAT=y
> +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_DM=y
> +CONFIG_CLK=y
> +CONFIG_CLK_CCF=y
> +CONFIG_CLK_AT91=y
> +CONFIG_AT91_UTMI=y
> +CONFIG_AT91_GENERIC_CLK=y
> +CONFIG_AT91_SAM9X60_PLL=y
> +CONFIG_CPU=y
> +CONFIG_ATMEL_PIO4=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ATMEL=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_ETH=y
> +CONFIG_MACB=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_AT91PIO4=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_ATMEL_USART=y
> +CONFIG_TIMER=y
> +CONFIG_MCHP_PIT64B_TIMER=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> +# CONFIG_EFI_LOADER_HII is not set
> 



More information about the U-Boot mailing list