[PATCH 29/34] configs: sama7g5: add mmc config for sdmmc0

Eugen.Hristev at microchip.com Eugen.Hristev at microchip.com
Thu Dec 3 11:47:12 CET 2020


On 03.12.2020 12:38, Jaehoon Chung wrote:
> Hi,
> 
> On 12/3/20 6:28 PM, Eugen Hristev wrote:
>> Add new config for storing environment from sdmmc0.
>> Also clean-up sama7g5ek_emmc1 to point to the proper mmc device.
> 
> Just one question, Sorry, i didn't check entire patchset.
> 
> What is different between sama7g5ek_mmc1 and sama7g5ek_mmc?

Sama7g5ek_mmc is set to store the environment in the eMMC device 
soldered on the board which is connected on the SDMMC0 hardware block.

sama7g5ek_mmc1 is set to store the environment on the SD-Card which can 
be inserted in the SD slot on the board which is connected on the SDMMC1 
hardware block.

So basically we have two possible boot/env store configurations, one on 
eMMC and one on SD-Card .

Eugen
> 
> Best Regards,
> Jaehoon Chung
> 
>>
>> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
>> ---
>>   board/atmel/sama7g5ek/MAINTAINERS |  1 +
>>   configs/sama7g5ek_mmc1_defconfig  |  7 ++--
>>   configs/sama7g5ek_mmc_defconfig   | 67 +++++++++++++++++++++++++++++++
>>   3 files changed, 72 insertions(+), 3 deletions(-)
>>   create mode 100644 configs/sama7g5ek_mmc_defconfig
>>
>> diff --git a/board/atmel/sama7g5ek/MAINTAINERS b/board/atmel/sama7g5ek/MAINTAINERS
>> index f66953ac4e..eac972968d 100644
>> --- a/board/atmel/sama7g5ek/MAINTAINERS
>> +++ b/board/atmel/sama7g5ek/MAINTAINERS
>> @@ -4,4 +4,5 @@ S:     Maintained
>>   F:     board/atmel/sama7g5ek.c
>>   F:     include/configs/sama7g5ek.h
>>   F:     configs/sama7g5ek_mmc1_defconfig
>> +F:     configs/sama7g5ek_mmc_defconfig
>>
>> diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig
>> index fa4c88ffa6..b6d2f4dd05 100644
>> --- a/configs/sama7g5ek_mmc1_defconfig
>> +++ b/configs/sama7g5ek_mmc1_defconfig
>> @@ -2,9 +2,10 @@ CONFIG_ARM=y
>>   CONFIG_ARCH_AT91=y
>>   CONFIG_SYS_TEXT_BASE=0x66f00000
>>   CONFIG_TARGET_SAMA7G5EK=y
>> -CONFIG_NR_DRAM_BANKS=1
>>   CONFIG_SYS_MALLOC_F_LEN=0x11000
>> +CONFIG_NR_DRAM_BANKS=1
>>   CONFIG_ENV_SIZE=0x4000
>> +CONFIG_DM_GPIO=y
>>   CONFIG_DEBUG_UART_BOARD_INIT=y
>>   CONFIG_DEBUG_UART_BASE=0xe1824200
>>   CONFIG_DEBUG_UART_CLOCK=200000000
>> @@ -14,6 +15,7 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
>>   CONFIG_FIT=y
>>   CONFIG_SD_BOOT=y
>>   CONFIG_USE_BOOTARGS=y
>> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
>>   CONFIG_MISC_INIT_R=y
>>   CONFIG_HUSH_PARSER=y
>>   CONFIG_CMD_BOOTZ=y
>> @@ -35,6 +37,7 @@ CONFIG_CMD_EXT4=y
>>   CONFIG_CMD_FAT=y
>>   CONFIG_OF_CONTROL=y
>>   CONFIG_ENV_IS_IN_FAT=y
>> +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
>>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>   CONFIG_DM=y
>>   CONFIG_CLK=y
>> @@ -44,7 +47,6 @@ CONFIG_AT91_UTMI=y
>>   CONFIG_AT91_GENERIC_CLK=y
>>   CONFIG_AT91_SAM9X60_PLL=y
>>   CONFIG_CPU=y
>> -CONFIG_DM_GPIO=y
>>   CONFIG_ATMEL_PIO4=y
>>   CONFIG_DM_I2C=y
>>   CONFIG_DM_MMC=y
>> @@ -56,7 +58,6 @@ CONFIG_DM_ETH=y
>>   CONFIG_MACB=y
>>   CONFIG_PINCTRL=y
>>   CONFIG_PINCTRL_AT91PIO4=y
>> -# CONFIG_RAM_ROCKCHIP_DEBUG is not set
>>   CONFIG_DM_SERIAL=y
>>   CONFIG_DEBUG_UART_ANNOUNCE=y
>>   CONFIG_ATMEL_USART=y
>> diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig
>> new file mode 100644
>> index 0000000000..894a64983f
>> --- /dev/null
>> +++ b/configs/sama7g5ek_mmc_defconfig
>> @@ -0,0 +1,67 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_AT91=y
>> +CONFIG_SYS_TEXT_BASE=0x66f00000
>> +CONFIG_TARGET_SAMA7G5EK=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x11000
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_ENV_SIZE=0x4000
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DEBUG_UART_BOARD_INIT=y
>> +CONFIG_DEBUG_UART_BASE=0xe1824200
>> +CONFIG_DEBUG_UART_CLOCK=200000000
>> +CONFIG_DEFAULT_DEVICE_TREE="sama7g5ek"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_ENV_VARS_UBOOT_CONFIG=y
>> +CONFIG_FIT=y
>> +CONFIG_SD_BOOT=y
>> +CONFIG_USE_BOOTARGS=y
>> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"
>> +CONFIG_MISC_INIT_R=y
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_CMD_BOOTZ=y
>> +# CONFIG_CMD_IMI is not set
>> +CONFIG_CMD_MD5SUM=y
>> +CONFIG_CMD_MEMTEST=y
>> +CONFIG_SYS_MEMTEST_START=0x60000000
>> +CONFIG_SYS_MEMTEST_END=0x70000000
>> +CONFIG_CMD_STRINGS=y
>> +CONFIG_CMD_DM=y
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_I2C=y
>> +# CONFIG_CMD_LOADS is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_DHCP=y
>> +CONFIG_CMD_MII=y
>> +CONFIG_CMD_PING=y
>> +CONFIG_CMD_EXT4=y
>> +CONFIG_CMD_FAT=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_ENV_IS_IN_FAT=y
>> +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>> +CONFIG_DM=y
>> +CONFIG_CLK=y
>> +CONFIG_CLK_CCF=y
>> +CONFIG_CLK_AT91=y
>> +CONFIG_AT91_UTMI=y
>> +CONFIG_AT91_GENERIC_CLK=y
>> +CONFIG_AT91_SAM9X60_PLL=y
>> +CONFIG_CPU=y
>> +CONFIG_ATMEL_PIO4=y
>> +CONFIG_DM_I2C=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_MMC_SDHCI=y
>> +CONFIG_MMC_SDHCI_ATMEL=y
>> +CONFIG_PHY_MICREL=y
>> +CONFIG_PHY_MICREL_KSZ90X1=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_MACB=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCTRL_AT91PIO4=y
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>> +CONFIG_ATMEL_USART=y
>> +CONFIG_TIMER=y
>> +CONFIG_MCHP_PIT64B_TIMER=y
>> +CONFIG_OF_LIBFDT_OVERLAY=y
>> +# CONFIG_EFI_LOADER_HII is not set
>>
> 



More information about the U-Boot mailing list