[PATCH 29/34] configs: sama7g5: add mmc config for sdmmc0

Jaehoon Chung jh80.chung at samsung.com
Thu Dec 3 12:11:41 CET 2020


On 12/3/20 7:47 PM, Eugen.Hristev at microchip.com wrote:
> On 03.12.2020 12:38, Jaehoon Chung wrote:
>> Hi,
>>
>> On 12/3/20 6:28 PM, Eugen Hristev wrote:
>>> Add new config for storing environment from sdmmc0.
>>> Also clean-up sama7g5ek_emmc1 to point to the proper mmc device.
>>
>> Just one question, Sorry, i didn't check entire patchset.
>>
>> What is different between sama7g5ek_mmc1 and sama7g5ek_mmc?
> 
> Sama7g5ek_mmc is set to store the environment in the eMMC device 
> soldered on the board which is connected on the SDMMC0 hardware block.
> 
> sama7g5ek_mmc1 is set to store the environment on the SD-Card which can 
> be inserted in the SD slot on the board which is connected on the SDMMC1 
> hardware block.
> 
> So basically we have two possible boot/env store configurations, one on 
> eMMC and one on SD-Card .

If device can know which device is used to boot, then i think that it doesn't need to add one more config.
It can know where env is stored at runtime.
(with CONFIG_ENV_FAT_DEVICE_AND_PART ":<partition>" and implement mmc_get_env_dev())


commit 6731bef6966ea2b26cdcfe0109ff5a950003fd03
Refs: v2020.07-1080-g6731bef696
Author:     David Woodhouse <dwmw2 at infradead.org>
AuthorDate: Fri Jun 19 23:07:17 2020 +0100
Commit:     Tom Rini <trini at konsulko.com>
CommitDate: Sun Jul 26 14:35:12 2020 -0400

    env/fat.c: allow loading from a FAT partition on the MMC boot device

    I don't want to have to specify the device; only the partition.

    This allows me to use the same image on internal eMMC or SD card for
    Banana Pi R2, and it finds its own environment either way.

    Signed-off-by: David Woodhouse <dwmw2 at infradead.org>
    [trini: Add #if/#else/#endif logic around CONFIG_SYS_MMC_ENV_DEV usage,
            whitespace changes]
    Signed-off-by: Tom Rini <trini at konsulko.com>


Best Regards,
Jaehoon Chung

> 
> Eugen
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>
>>> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
>>> ---
>>>   board/atmel/sama7g5ek/MAINTAINERS |  1 +
>>>   configs/sama7g5ek_mmc1_defconfig  |  7 ++--
>>>   configs/sama7g5ek_mmc_defconfig   | 67 +++++++++++++++++++++++++++++++
>>>   3 files changed, 72 insertions(+), 3 deletions(-)
>>>   create mode 100644 configs/sama7g5ek_mmc_defconfig
>>>
>>> diff --git a/board/atmel/sama7g5ek/MAINTAINERS b/board/atmel/sama7g5ek/MAINTAINERS
>>> index f66953ac4e..eac972968d 100644
>>> --- a/board/atmel/sama7g5ek/MAINTAINERS
>>> +++ b/board/atmel/sama7g5ek/MAINTAINERS
>>> @@ -4,4 +4,5 @@ S:     Maintained
>>>   F:     board/atmel/sama7g5ek.c
>>>   F:     include/configs/sama7g5ek.h
>>>   F:     configs/sama7g5ek_mmc1_defconfig
>>> +F:     configs/sama7g5ek_mmc_defconfig
>>>
>>> diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig
>>> index fa4c88ffa6..b6d2f4dd05 100644
>>> --- a/configs/sama7g5ek_mmc1_defconfig
>>> +++ b/configs/sama7g5ek_mmc1_defconfig
>>> @@ -2,9 +2,10 @@ CONFIG_ARM=y
>>>   CONFIG_ARCH_AT91=y
>>>   CONFIG_SYS_TEXT_BASE=0x66f00000
>>>   CONFIG_TARGET_SAMA7G5EK=y
>>> -CONFIG_NR_DRAM_BANKS=1
>>>   CONFIG_SYS_MALLOC_F_LEN=0x11000
>>> +CONFIG_NR_DRAM_BANKS=1
>>>   CONFIG_ENV_SIZE=0x4000
>>> +CONFIG_DM_GPIO=y
>>>   CONFIG_DEBUG_UART_BOARD_INIT=y
>>>   CONFIG_DEBUG_UART_BASE=0xe1824200
>>>   CONFIG_DEBUG_UART_CLOCK=200000000
>>> @@ -14,6 +15,7 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
>>>   CONFIG_FIT=y
>>>   CONFIG_SD_BOOT=y
>>>   CONFIG_USE_BOOTARGS=y
>>> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
>>>   CONFIG_MISC_INIT_R=y
>>>   CONFIG_HUSH_PARSER=y
>>>   CONFIG_CMD_BOOTZ=y
>>> @@ -35,6 +37,7 @@ CONFIG_CMD_EXT4=y
>>>   CONFIG_CMD_FAT=y
>>>   CONFIG_OF_CONTROL=y
>>>   CONFIG_ENV_IS_IN_FAT=y
>>> +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
>>>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>>   CONFIG_DM=y
>>>   CONFIG_CLK=y
>>> @@ -44,7 +47,6 @@ CONFIG_AT91_UTMI=y
>>>   CONFIG_AT91_GENERIC_CLK=y
>>>   CONFIG_AT91_SAM9X60_PLL=y
>>>   CONFIG_CPU=y
>>> -CONFIG_DM_GPIO=y
>>>   CONFIG_ATMEL_PIO4=y
>>>   CONFIG_DM_I2C=y
>>>   CONFIG_DM_MMC=y
>>> @@ -56,7 +58,6 @@ CONFIG_DM_ETH=y
>>>   CONFIG_MACB=y
>>>   CONFIG_PINCTRL=y
>>>   CONFIG_PINCTRL_AT91PIO4=y
>>> -# CONFIG_RAM_ROCKCHIP_DEBUG is not set
>>>   CONFIG_DM_SERIAL=y
>>>   CONFIG_DEBUG_UART_ANNOUNCE=y
>>>   CONFIG_ATMEL_USART=y
>>> diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig
>>> new file mode 100644
>>> index 0000000000..894a64983f
>>> --- /dev/null
>>> +++ b/configs/sama7g5ek_mmc_defconfig
>>> @@ -0,0 +1,67 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_ARCH_AT91=y
>>> +CONFIG_SYS_TEXT_BASE=0x66f00000
>>> +CONFIG_TARGET_SAMA7G5EK=y
>>> +CONFIG_SYS_MALLOC_F_LEN=0x11000
>>> +CONFIG_NR_DRAM_BANKS=1
>>> +CONFIG_ENV_SIZE=0x4000
>>> +CONFIG_DM_GPIO=y
>>> +CONFIG_DEBUG_UART_BOARD_INIT=y
>>> +CONFIG_DEBUG_UART_BASE=0xe1824200
>>> +CONFIG_DEBUG_UART_CLOCK=200000000
>>> +CONFIG_DEFAULT_DEVICE_TREE="sama7g5ek"
>>> +CONFIG_DEBUG_UART=y
>>> +CONFIG_ENV_VARS_UBOOT_CONFIG=y
>>> +CONFIG_FIT=y
>>> +CONFIG_SD_BOOT=y
>>> +CONFIG_USE_BOOTARGS=y
>>> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"
>>> +CONFIG_MISC_INIT_R=y
>>> +CONFIG_HUSH_PARSER=y
>>> +CONFIG_CMD_BOOTZ=y
>>> +# CONFIG_CMD_IMI is not set
>>> +CONFIG_CMD_MD5SUM=y
>>> +CONFIG_CMD_MEMTEST=y
>>> +CONFIG_SYS_MEMTEST_START=0x60000000
>>> +CONFIG_SYS_MEMTEST_END=0x70000000
>>> +CONFIG_CMD_STRINGS=y
>>> +CONFIG_CMD_DM=y
>>> +CONFIG_CMD_GPIO=y
>>> +CONFIG_CMD_I2C=y
>>> +# CONFIG_CMD_LOADS is not set
>>> +CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_DHCP=y
>>> +CONFIG_CMD_MII=y
>>> +CONFIG_CMD_PING=y
>>> +CONFIG_CMD_EXT4=y
>>> +CONFIG_CMD_FAT=y
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_ENV_IS_IN_FAT=y
>>> +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
>>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>> +CONFIG_DM=y
>>> +CONFIG_CLK=y
>>> +CONFIG_CLK_CCF=y
>>> +CONFIG_CLK_AT91=y
>>> +CONFIG_AT91_UTMI=y
>>> +CONFIG_AT91_GENERIC_CLK=y
>>> +CONFIG_AT91_SAM9X60_PLL=y
>>> +CONFIG_CPU=y
>>> +CONFIG_ATMEL_PIO4=y
>>> +CONFIG_DM_I2C=y
>>> +CONFIG_DM_MMC=y
>>> +CONFIG_MMC_SDHCI=y
>>> +CONFIG_MMC_SDHCI_ATMEL=y
>>> +CONFIG_PHY_MICREL=y
>>> +CONFIG_PHY_MICREL_KSZ90X1=y
>>> +CONFIG_DM_ETH=y
>>> +CONFIG_MACB=y
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_PINCTRL_AT91PIO4=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>>> +CONFIG_ATMEL_USART=y
>>> +CONFIG_TIMER=y
>>> +CONFIG_MCHP_PIT64B_TIMER=y
>>> +CONFIG_OF_LIBFDT_OVERLAY=y
>>> +# CONFIG_EFI_LOADER_HII is not set
>>>
>>
> 



More information about the U-Boot mailing list