ARM: mvebu: enable SPI for helios4 and sata and uart images for clearfog

[Stefan Roese]

Hi Dennis,

On 09.12.20 04:07, dgilmore at redhat.com wrote:
> In an effort to build SPI images for clearfog and helios4 I needed to make some
> minor changes to the dts and Kconfig for the helios4 and set some variables for
> UART and SATA images for ClearFog.
> 
> Version 2 dropped changes for db-mv784mp-gp as the board turns out to be currently
> broken, the serial port is not available and the system bails after loading the SPL
> the dts changes for the helios4 have been shrunk back to remove everything not
> needed or valid

Could you please test this small patch on the db-mv784mp-gp and report
back, if this works:

diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts
index 1139e9469a..57abbbba58 100644
--- a/arch/arm/dts/armada-xp-gp.dts
+++ b/arch/arm/dts/armada-xp-gp.dts
@@ -93,6 +93,7 @@
                 internal-regs {
                         serial at 12000 {
                                 status = "okay";
+                               u-boot,dm-pre-reloc;
                         };
                         serial at 12100 {
                                 status = "okay";


Thanks,
Stefan