[PATCH v2] Nokia RX-51: Enable usbtty serial console by default
Lokesh Vutla
lokeshvutla at ti.com
Tue Dec 22 16:08:01 CET 2020
On 22/12/20 8:36 pm, Lokesh Vutla wrote:
>
>
> On 22/12/20 8:28 pm, Pali Rohár wrote:
>> On Tuesday 22 December 2020 19:56:51 Lokesh Vutla wrote:
>>>
>>>
>>> On 01/12/20 12:57 am, Pali Rohár wrote:
>>>> Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for
>>>> Nokia RX-51 board by default.
>>>>
>>>> Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and
>>>> include U-Boot string into USB product name to indicate usage of U-Boot.
>>>>
>>>> CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
>>>> all in/out devices. Therefore there is no need to have separate commands
>>>> 'run sercon', 'run usbcon' and 'run vgacon', so remove them.
>>>>
>>>> As space for U-Boot is limited to 256kB, disable some other unused options
>>>> so CONFIG_USB_TTY can be enabled.
>>>>
>>>> Nokia RX-51 does not have easily accessible UART serial console so the only
>>>> option for easy debugging is to use device's keyboard+screen or this usbtty
>>>> serial console over USB.
>>>>
>>>> Signed-off-by: Pali Rohár <pali at kernel.org>
>>>> ---
>>>> Changes since v1:
>>>> * Fixed USB product id and product name
>>>> * Disabled some other options to free more space
>>>> * Changes now passed CI tests:
>>>> https://dev.azure.com/u-boot/u-boot/_build/results?buildId=1492&view=results
>>>>
>>>> Note that this patch depends on other Nokia RX-51 patches which are on
>>>> mailing list, otherwise CI tests do not pass:
>>>>
>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223011.14262-1-pali@kernel.org/
>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223317.14347-1-pali@kernel.org/
>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201129161505.5092-1-pali@kernel.org/
>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201130191034.795-1-pali@kernel.org/
>>>
>>> okay, Ill wait for all these patches to get merged, before I pick this patch.
>>
>> Web pages for all these patches is saying:
>>
>> State: Under Review
>> Delegated to: Lokesh Vutla
>>
>> So I think these patches are also waiting for you.
>
> The main patch I need is this[0]. Without this I am getting a build failure as
> you mentioned in the commit description. So, Until [0] patch is applied I cannot
> apply this patch. Since you combined disabling of other configs in the same
> patch, it is causing my pipeline failure.
>
> Can you split the disabling of other configs into a separate patch so that
> others are unblocked?
[0]
https://patchwork.ozlabs.org/project/uboot/patch/20201130192715.1793-1-pali@kernel.org/
Sorry missed this.
Thanks and regards,
Lokesh
>
> Thanks and regards,
> Lokesh
>
>>
>>> Thanks and regards,
>>> Lokesh
>>>
>>>> ---
>>>> configs/nokia_rx51_defconfig | 8 +++++---
>>>> doc/README.nokia_rx51 | 15 +--------------
>>>> include/configs/nokia_rx51.h | 21 +++++++--------------
>>>> 3 files changed, 13 insertions(+), 31 deletions(-)
>>>>
>>>> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
>>>> index 0f05fe6fc3..963dd145ce 100644
>>>> --- a/configs/nokia_rx51_defconfig
>>>> +++ b/configs/nokia_rx51_defconfig
>>>> @@ -44,18 +44,16 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=onenand:128k(bootloader)ro,384k(config),256k(l
>>>> CONFIG_ENV_OVERWRITE=y
>>>> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>>> # CONFIG_NET is not set
>>>> -CONFIG_TWL4030_LED=y
>>>> # CONFIG_MMC_HW_PARTITIONING is not set
>>>> +# CONFIG_MMC_VERBOSE is not set
>>>> CONFIG_MMC_OMAP_HS=y
>>>> CONFIG_MTD=y
>>>> CONFIG_CONS_INDEX=3
>>>> CONFIG_SYS_NS16550=y
>>>> CONFIG_SPI=y
>>>> CONFIG_USB=y
>>>> -CONFIG_USB_MUSB_HCD=y
>>>> CONFIG_USB_MUSB_UDC=y
>>>> CONFIG_USB_OMAP3=y
>>>> -CONFIG_TWL4030_USB=y
>>>> CONFIG_CFB_CONSOLE=y
>>>> CONFIG_CFB_CONSOLE_ANSI=y
>>>> # CONFIG_VGA_AS_SINGLE_DEVICE is not set
>>>> @@ -66,3 +64,7 @@ CONFIG_DM_I2C=y
>>>> CONFIG_DM_MMC=y
>>>> # CONFIG_DM_DEVICE_REMOVE is not set
>>>> # CONFIG_SYS_MALLOC_F is not set
>>>> +# CONFIG_DM_WARN is not set
>>>> +# CONFIG_DM_SEQ_ALIAS is not set
>>>> +# CONFIG_BLOCK_CACHE is not set
>>>> +# CONFIG_SYS_DEVICE_NULLDEV is not set
>>>> diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
>>>> index 320b5efc7d..84d1912ddd 100644
>>>> --- a/doc/README.nokia_rx51
>>>> +++ b/doc/README.nokia_rx51
>>>> @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository:
>>>> There is support for hardware watchdog. Hardware watchdog is started by
>>>> NOLO so u-boot must kick watchdog to prevent reboot device (but not very
>>>> often, max every 2 seconds). There is also support for framebuffer display
>>>> -output with ANSI escape codes and the N900 HW keyboard input. USB tty works
>>>> -but is disabled because it prevents the current Maemo kernel from booting.
>>>> +output with ANSI escape codes and the N900 HW keyboard input.
>>>>
>>>> When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
>>>> which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
>>>> @@ -49,10 +48,6 @@ Boot from SD or eMMC in this order:
>>>>
>>>> Available additional commands/variables:
>>>>
>>>> - * run sercon - Use serial port for control
>>>> - * run usbcon - Use usbtty for control
>>>> - * run vgacon - Use framebuffer and HW keyboard for control (default)
>>>> -
>>>> * run sdboot - Boot from external SD card (see boot order)
>>>> * run emmcboot - Boot from internal eMMC memory (see boot order)
>>>> * run attachboot - Boot attached kernel image (attached to U-Boot binary)
>>>> @@ -87,14 +82,6 @@ Additional variables for booting kernel:
>>>> and u-boot standard output is set to serial then setup_console_atag is
>>>> automatically set to 1. So output from Maemo kernel would go to serial port.
>>>>
>>>> -USB TTY:
>>>> -
>>>> - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
>>>> - For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
>>>> -
>>>> - #define CONFIG_USB_TTY
>>>> -
>>>> -
>>>> UBIFS support:
>>>>
>>>> UBIFS support is disabled, because U-Boot image is too big and cannot be
>>>> diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
>>>> index 3f2700d8e2..23368de624 100644
>>>> --- a/include/configs/nokia_rx51.h
>>>> +++ b/include/configs/nokia_rx51.h
>>>> @@ -70,10 +70,12 @@
>>>>
>>>> /* USB device configuration */
>>>> #define CONFIG_USB_DEVICE
>>>> +#define CONFIG_USB_TTY
>>>> #define CONFIG_USBD_VENDORID 0x0421
>>>> -#define CONFIG_USBD_PRODUCTID 0x01c8
>>>> +#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
>>>> +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
>>>> #define CONFIG_USBD_MANUFACTURER "Nokia"
>>>> -#define CONFIG_USBD_PRODUCT_NAME "N900"
>>>> +#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
>>>>
>>>> #define GPIO_SLIDE 71
>>>>
>>>> @@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>> /* Environment information */
>>>> #define CONFIG_EXTRA_ENV_SETTINGS \
>>>> "usbtty=cdc_acm\0" \
>>>> - "stdin=serial,vga\0" \
>>>> - "stdout=serial,vga\0" \
>>>> - "stderr=serial,vga\0" \
>>>> - "setcon=setenv stdin ${con};" \
>>>> - "setenv stdout ${con};" \
>>>> - "setenv stderr ${con}\0" \
>>>> - "sercon=setenv con serial; run setcon\0" \
>>>> - "usbcon=setenv con usbtty; run setcon\0" \
>>>> - "vgacon=setenv con vga; run setcon\0" \
>>>> + "stdin=usbtty,serial,vga\0" \
>>>> + "stdout=usbtty,serial,vga\0" \
>>>> + "stderr=usbtty,serial,vga\0" \
>>>> "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
>>>> "switchmmc=mmc dev ${mmcnum}\0" \
>>>> "kernaddr=0x82008000\0" \
>>>> @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>> #define CONFIG_POSTBOOTMENU \
>>>> "echo;" \
>>>> "echo Extra commands:;" \
>>>> - "echo run sercon - Use serial port for control.;" \
>>>> - "echo run usbcon - Use usbtty for control.;" \
>>>> - "echo run vgacon - Use framebuffer/keyboard.;" \
>>>> "echo run sdboot - Boot from SD card slot.;" \
>>>> "echo run emmcboot - Boot internal eMMC memory.;" \
>>>> "echo run attachboot - Boot attached kernel image.;" \
>>>>
More information about the U-Boot
mailing list