[PATCH v2] Nokia RX-51: Enable usbtty serial console by default
Lokesh Vutla
lokeshvutla at ti.com
Tue Dec 22 16:09:11 CET 2020
On 22/12/20 8:38 pm, Lokesh Vutla wrote:
>
>
> On 22/12/20 8:36 pm, Lokesh Vutla wrote:
>>
>>
>> On 22/12/20 8:28 pm, Pali Rohár wrote:
>>> On Tuesday 22 December 2020 19:56:51 Lokesh Vutla wrote:
>>>>
>>>>
>>>> On 01/12/20 12:57 am, Pali Rohár wrote:
>>>>> Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for
>>>>> Nokia RX-51 board by default.
>>>>>
>>>>> Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and
>>>>> include U-Boot string into USB product name to indicate usage of U-Boot.
>>>>>
>>>>> CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
>>>>> all in/out devices. Therefore there is no need to have separate commands
>>>>> 'run sercon', 'run usbcon' and 'run vgacon', so remove them.
>>>>>
>>>>> As space for U-Boot is limited to 256kB, disable some other unused options
>>>>> so CONFIG_USB_TTY can be enabled.
>>>>>
>>>>> Nokia RX-51 does not have easily accessible UART serial console so the only
>>>>> option for easy debugging is to use device's keyboard+screen or this usbtty
>>>>> serial console over USB.
>>>>>
>>>>> Signed-off-by: Pali Rohár <pali at kernel.org>
>>>>> ---
>>>>> Changes since v1:
>>>>> * Fixed USB product id and product name
>>>>> * Disabled some other options to free more space
>>>>> * Changes now passed CI tests:
>>>>> https://dev.azure.com/u-boot/u-boot/_build/results?buildId=1492&view=results
>>>>>
>>>>> Note that this patch depends on other Nokia RX-51 patches which are on
>>>>> mailing list, otherwise CI tests do not pass:
>>>>>
>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223011.14262-1-pali@kernel.org/
>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223317.14347-1-pali@kernel.org/
>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201129161505.5092-1-pali@kernel.org/
>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201130191034.795-1-pali@kernel.org/
>>>>
>>>> okay, Ill wait for all these patches to get merged, before I pick this patch.
>>>
>>> Web pages for all these patches is saying:
>>>
>>> State: Under Review
>>> Delegated to: Lokesh Vutla
>>>
>>> So I think these patches are also waiting for you.
>>
>> The main patch I need is this[0]. Without this I am getting a build failure as
>> you mentioned in the commit description. So, Until [0] patch is applied I cannot
>> apply this patch. Since you combined disabling of other configs in the same
>> patch, it is causing my pipeline failure.
>>
>> Can you split the disabling of other configs into a separate patch so that
>> others are unblocked?
>
> [0]
> https://patchwork.ozlabs.org/project/uboot/patch/20201130192715.1793-1-pali@kernel.org/
ahh copy paste issues:
[0]
https://patchwork.ozlabs.org/project/uboot/patch/20201129164618.5829-3-pali@kernel.org/
Thanks and regards,
Lokesh
>
> Sorry missed this.
>
> Thanks and regards,
> Lokesh
>
>>
>> Thanks and regards,
>> Lokesh
>>
>>>
>>>> Thanks and regards,
>>>> Lokesh
>>>>
>>>>> ---
>>>>> configs/nokia_rx51_defconfig | 8 +++++---
>>>>> doc/README.nokia_rx51 | 15 +--------------
>>>>> include/configs/nokia_rx51.h | 21 +++++++--------------
>>>>> 3 files changed, 13 insertions(+), 31 deletions(-)
>>>>>
>>>>> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
>>>>> index 0f05fe6fc3..963dd145ce 100644
>>>>> --- a/configs/nokia_rx51_defconfig
>>>>> +++ b/configs/nokia_rx51_defconfig
>>>>> @@ -44,18 +44,16 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=onenand:128k(bootloader)ro,384k(config),256k(l
>>>>> CONFIG_ENV_OVERWRITE=y
>>>>> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>>>> # CONFIG_NET is not set
>>>>> -CONFIG_TWL4030_LED=y
>>>>> # CONFIG_MMC_HW_PARTITIONING is not set
>>>>> +# CONFIG_MMC_VERBOSE is not set
>>>>> CONFIG_MMC_OMAP_HS=y
>>>>> CONFIG_MTD=y
>>>>> CONFIG_CONS_INDEX=3
>>>>> CONFIG_SYS_NS16550=y
>>>>> CONFIG_SPI=y
>>>>> CONFIG_USB=y
>>>>> -CONFIG_USB_MUSB_HCD=y
>>>>> CONFIG_USB_MUSB_UDC=y
>>>>> CONFIG_USB_OMAP3=y
>>>>> -CONFIG_TWL4030_USB=y
>>>>> CONFIG_CFB_CONSOLE=y
>>>>> CONFIG_CFB_CONSOLE_ANSI=y
>>>>> # CONFIG_VGA_AS_SINGLE_DEVICE is not set
>>>>> @@ -66,3 +64,7 @@ CONFIG_DM_I2C=y
>>>>> CONFIG_DM_MMC=y
>>>>> # CONFIG_DM_DEVICE_REMOVE is not set
>>>>> # CONFIG_SYS_MALLOC_F is not set
>>>>> +# CONFIG_DM_WARN is not set
>>>>> +# CONFIG_DM_SEQ_ALIAS is not set
>>>>> +# CONFIG_BLOCK_CACHE is not set
>>>>> +# CONFIG_SYS_DEVICE_NULLDEV is not set
>>>>> diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
>>>>> index 320b5efc7d..84d1912ddd 100644
>>>>> --- a/doc/README.nokia_rx51
>>>>> +++ b/doc/README.nokia_rx51
>>>>> @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository:
>>>>> There is support for hardware watchdog. Hardware watchdog is started by
>>>>> NOLO so u-boot must kick watchdog to prevent reboot device (but not very
>>>>> often, max every 2 seconds). There is also support for framebuffer display
>>>>> -output with ANSI escape codes and the N900 HW keyboard input. USB tty works
>>>>> -but is disabled because it prevents the current Maemo kernel from booting.
>>>>> +output with ANSI escape codes and the N900 HW keyboard input.
>>>>>
>>>>> When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
>>>>> which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
>>>>> @@ -49,10 +48,6 @@ Boot from SD or eMMC in this order:
>>>>>
>>>>> Available additional commands/variables:
>>>>>
>>>>> - * run sercon - Use serial port for control
>>>>> - * run usbcon - Use usbtty for control
>>>>> - * run vgacon - Use framebuffer and HW keyboard for control (default)
>>>>> -
>>>>> * run sdboot - Boot from external SD card (see boot order)
>>>>> * run emmcboot - Boot from internal eMMC memory (see boot order)
>>>>> * run attachboot - Boot attached kernel image (attached to U-Boot binary)
>>>>> @@ -87,14 +82,6 @@ Additional variables for booting kernel:
>>>>> and u-boot standard output is set to serial then setup_console_atag is
>>>>> automatically set to 1. So output from Maemo kernel would go to serial port.
>>>>>
>>>>> -USB TTY:
>>>>> -
>>>>> - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
>>>>> - For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
>>>>> -
>>>>> - #define CONFIG_USB_TTY
>>>>> -
>>>>> -
>>>>> UBIFS support:
>>>>>
>>>>> UBIFS support is disabled, because U-Boot image is too big and cannot be
>>>>> diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
>>>>> index 3f2700d8e2..23368de624 100644
>>>>> --- a/include/configs/nokia_rx51.h
>>>>> +++ b/include/configs/nokia_rx51.h
>>>>> @@ -70,10 +70,12 @@
>>>>>
>>>>> /* USB device configuration */
>>>>> #define CONFIG_USB_DEVICE
>>>>> +#define CONFIG_USB_TTY
>>>>> #define CONFIG_USBD_VENDORID 0x0421
>>>>> -#define CONFIG_USBD_PRODUCTID 0x01c8
>>>>> +#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
>>>>> +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
>>>>> #define CONFIG_USBD_MANUFACTURER "Nokia"
>>>>> -#define CONFIG_USBD_PRODUCT_NAME "N900"
>>>>> +#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
>>>>>
>>>>> #define GPIO_SLIDE 71
>>>>>
>>>>> @@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>>> /* Environment information */
>>>>> #define CONFIG_EXTRA_ENV_SETTINGS \
>>>>> "usbtty=cdc_acm\0" \
>>>>> - "stdin=serial,vga\0" \
>>>>> - "stdout=serial,vga\0" \
>>>>> - "stderr=serial,vga\0" \
>>>>> - "setcon=setenv stdin ${con};" \
>>>>> - "setenv stdout ${con};" \
>>>>> - "setenv stderr ${con}\0" \
>>>>> - "sercon=setenv con serial; run setcon\0" \
>>>>> - "usbcon=setenv con usbtty; run setcon\0" \
>>>>> - "vgacon=setenv con vga; run setcon\0" \
>>>>> + "stdin=usbtty,serial,vga\0" \
>>>>> + "stdout=usbtty,serial,vga\0" \
>>>>> + "stderr=usbtty,serial,vga\0" \
>>>>> "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
>>>>> "switchmmc=mmc dev ${mmcnum}\0" \
>>>>> "kernaddr=0x82008000\0" \
>>>>> @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>>> #define CONFIG_POSTBOOTMENU \
>>>>> "echo;" \
>>>>> "echo Extra commands:;" \
>>>>> - "echo run sercon - Use serial port for control.;" \
>>>>> - "echo run usbcon - Use usbtty for control.;" \
>>>>> - "echo run vgacon - Use framebuffer/keyboard.;" \
>>>>> "echo run sdboot - Boot from SD card slot.;" \
>>>>> "echo run emmcboot - Boot internal eMMC memory.;" \
>>>>> "echo run attachboot - Boot attached kernel image.;" \
>>>>>
More information about the U-Boot
mailing list