[PATCH v5] Add support for SoM "VoCore2".

[Mauro Condarelli]

Thanks Stefan.

On 2/13/20 10:21 AM, Stefan wrote:
> On 13.02.20 10:18, Mauro Condarelli wrote:
>> Thanks Stefan.
>>
>> On 2/13/20 7:50 AM, Stefan wrote:
>>> On 12.02.20 16:30, Mauro Condarelli wrote:
>>>> Small patch series to add support for VoCore/VoCore2 board.
>>>>
>>>> VoCore is open hardware and runs OpenWrt/LEDE.
>>>> It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
>>>> It will help you to make a smart house, study embedded system
>>>> or even make the tiniest router in the world.
>>>>
>>>> Details about this SoM can be found at "https://vocore.io/v2.html".
>>>>
>>>> Signed-off-by: Mauro Condarelli <mc5686 at mclink.it>
>>>> ---
>>>>
>>>> Changes in v5:
>>>> - Removed unneeded (and wrong) UART2 initialization in board.c
>>>> - Added network setup.
>>>> - Removed project-specific code.
>>>> - Move back environment to SPI NOR.
>>>> - Changes to environment default settings.
>>>> - Rebase on current u-boot-mips/testing
>>>>
>>>> Changes in v4:
>>>> - Reverted some overzealous DTS cleaning.
>>>> - Added support for bootcount
>>>>
>>>> Changes in v3:
>>>> - based on top of Weijie Gao patchset:
>>>>       "[v3,xx/20]Refactor the architecture parts of mt7628"
>>>>
>>>> Changes in v2:
>>>> - Removed some dead code
>>>> - Changed Author to my full name (no nick)
>>>> - Removed unwanted fixup to .dts generation (not my call).
>>>> - Fixed commit message
>>>> - Fixed various variables/filenames to include Vendor name
>>>> - Changed Vendor name (Vonger -> Vocore)
>>>>
>>>>    arch/mips/dts/Makefile               |   1 +
>>>>    arch/mips/dts/mt7628a.dtsi           |   5 ++
>>>>    arch/mips/dts/vocore_vocore2.dts     |  78 ++++++++++++++++++++
>>>>    arch/mips/mach-mtmips/Kconfig        |   8 +++
>>>>    board/vocore/vocore2/Kconfig         |  12 ++++
>>>>    board/vocore/vocore2/Makefile        |   3 +
>>>>    board/vocore/vocore2/board.c         |   6 ++
>>>>    configs/vocore2_defconfig            | 103
>>>> ++++++++++++++++++++++++++
>>>>    configs/vocore2_defconfig_ENV_IN_FAT | 104
>>>> +++++++++++++++++++++++++++
>>>>    include/configs/vocore2.h            |  61 ++++++++++++++++
>>>>    10 files changed, 381 insertions(+)
>>>>    create mode 100644 arch/mips/dts/vocore_vocore2.dts
>>>>    create mode 100644 board/vocore/vocore2/Kconfig
>>>>    create mode 100644 board/vocore/vocore2/Makefile
>>>>    create mode 100644 board/vocore/vocore2/board.c
>>>>    create mode 100644 configs/vocore2_defconfig
>>>>    create mode 100644 configs/vocore2_defconfig_ENV_IN_FAT
>>>>    create mode 100644 include/configs/vocore2.h
>>>
>>> Apart from the other comments, the MAINTAINERS file is missing. Please
>>> add it in the next patch version.
>> Yes, I know.
>> Also patman was complaining.
>> I perused MAINTAINERS and it didn't look like specific board
>> maintainers are in.
>> I have no problems adding me to the list, but I'm unsure I have
>> the privilege and it's unclear where I should add myself.
>
> I was not referring to the global MAINTAINERS file but the one located
> in the board directory. Please see:
>
> board/gardena/smart-gateway-mt7688/MAINTAINERS
Oops!
I completely overlooked that.
Done.


> Thanks,
> Stefan

Many Thanks
Mauro