[PATCH v1 2/2] rockchip: rk3328: add roc-rk3328-cc support

Loic Devulder ldevulder at suse.com
Fri Feb 14 15:46:27 CET 2020


ROC-RK3328-CC is a board made by Firefly/Libre Computer based on rk3328
SoC:
- 2 USB2.0 Host port
- 1 USB3.0 Host port
- 1 HDMI port
- 2 10/100M eth port
- 1GB or 2GB DDR4
- UART to USB debug port

This port is based on evb-rk3328 already available in U-Boot.

Signed-off-by: Loic Devulder <ldevulder at suse.com>
---
 arch/arm/dts/Makefile                  |   3 +-
 arch/arm/dts/rk3328-roc-cc-u-boot.dtsi |  16 ++
 arch/arm/dts/rk3328-roc-cc.dts         | 260 +++++++++++++++++++++++++
 arch/arm/mach-rockchip/rk3328/Kconfig  |   1 -
 board/rockchip/evb_rk3328/MAINTAINERS  |   6 +
 configs/roc-cc-rk3328_defconfig        |  95 +++++++++
 doc/README.rockchip                    |   9 +-
 7 files changed, 384 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3328-roc-cc.dts
 create mode 100644 configs/roc-cc-rk3328_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 4fee5cc489..db4b987c4c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -104,7 +104,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
 
 dtb-$(CONFIG_ROCKCHIP_RK3328) += \
 	rk3328-evb.dtb \
-	rk3328-rock64.dtb
+	rk3328-rock64.dtb \
+	rk3328-roc-cc.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3368) += \
 	rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
new file mode 100644
index 0000000000..cf3452ea94
--- /dev/null
+++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr4-666.dtsi"
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+	};
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts
new file mode 100644
index 0000000000..2bfb261bad
--- /dev/null
+++ b/arch/arm/dts/rk3328-roc-cc.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3328-CC";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc3v3_sdmmc: sdmmc-pwren {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+		status = "disabled";	//usb host xhci and usb otg use the same gpio to enable power
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc5v0_host_xhci";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+	};
+};
+
+&saradc {
+	status = "okay";
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	status = "okay";
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2io {
+        phy-supply = <&vcc_phy>;
+        phy-mode = "rgmii";
+        clock_in_out = "input";
+        snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+        snps,reset-active-low;
+        snps,reset-delays-us = <0 10000 50000>;
+        assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+        assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmiim1_pins>;
+        tx_delay = <0x26>;
+        rx_delay = <0x11>;
+        status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb20_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc5v0_host_xhci>;
+	status = "okay";
+	maximum-speed = "high-speed";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk805: pmic at 18 {
+		compatible = "rockchip,rk805";
+		status = "okay";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+
+		pwrkey {
+			status = "okay";
+		};
+
+		led1 {
+			label = "standby";
+		};
+
+		led2 {
+			label = "power";
+		};
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <6001>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <6001>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_18: LDO_REG1 {
+				regulator-name = "vdd_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_18emmc: LDO_REG2 {
+				regulator-name = "vcc_18emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+		rockchip,pins =
+			<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;	/* gpio1_d0 */
+		};
+	};
+};
diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig
index d13a169022..7fc4af9a4d 100644
--- a/arch/arm/mach-rockchip/rk3328/Kconfig
+++ b/arch/arm/mach-rockchip/rk3328/Kconfig
@@ -40,5 +40,4 @@ config TPL_STACK
 	default 0xff098000
 
 source "board/rockchip/evb_rk3328/Kconfig"
-
 endif
diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS
index c661d2e06a..86aefc801a 100644
--- a/board/rockchip/evb_rk3328/MAINTAINERS
+++ b/board/rockchip/evb_rk3328/MAINTAINERS
@@ -10,3 +10,9 @@ M:      Matwey V. Kornilov <matwey.kornilov at gmail.com>
 S:      Maintained
 F:      configs/rock64-rk3328_defconfig
 F:      arch/arm/dts/rk3328-rock64-u-boot.dtsi
+
+ROC-RK3328-CC
+M:      Loic Devulder <ldevulder at suse.com>
+S:      Maintained
+F:      configs/roc-rk3328-cc_defconfig
+F:      arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
new file mode 100644
index 0000000000..2ea4616401
--- /dev/null
+++ b/configs/roc-cc-rk3328_defconfig
@@ -0,0 +1,95 @@
+CONFIG_SMBIOS_MANUFACTURER="firefly"
+CONFIG_SMBIOS_PRODUCT_NAME="roc-rk3328-cc"
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_TPL_OF_PLATDATA=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_TPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_TPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+# CONFIG_TPL_SYSRESET is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 9b699b9ae5..9aeee37900 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -52,12 +52,13 @@ Two RK3308 boards are supported:
    - EVB RK3308 - use evb-rk3308 configuration
    - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
 
-Two RK3328 board are supported:
+Three RK3328 boards are supported:
 
-   - EVB RK3328 - use evb-rk3328_defconfig
-   - Pine64 Rock64 board - use rock64-rk3328_defconfig
+   - EVB RK3328 - use evb_rk3328 configuration
+   - Pine64 Rock64 board - use rock64-rk3328 configuration
+   - ROC-RK3328-CC - use roc-cc-rk3328 configuration
 
-Size RK3399 boards are supported (aarch64):
+Six RK3399 boards are supported (aarch64):
 
    - EBV RK3399 - use evb_rk3399 configuration
    - Firefly RK3399 - use the firefly_rk3399 configuration
-- 
2.25.0



More information about the U-Boot mailing list