[PATCH v1 2/2] rockchip: rk3328: add roc-rk3328-cc support
Kever Yang
kever.yang at rock-chips.com
Wed Feb 19 09:42:14 CET 2020
On 2020/2/14 下午10:46, Loic Devulder wrote:
> ROC-RK3328-CC is a board made by Firefly/Libre Computer based on rk3328
> SoC:
> - 2 USB2.0 Host port
> - 1 USB3.0 Host port
> - 1 HDMI port
> - 2 10/100M eth port
> - 1GB or 2GB DDR4
> - UART to USB debug port
>
> This port is based on evb-rk3328 already available in U-Boot.
>
> Signed-off-by: Loic Devulder <ldevulder at suse.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 16 ++
> arch/arm/dts/rk3328-roc-cc.dts | 260 +++++++++++++++++++++++++
> arch/arm/mach-rockchip/rk3328/Kconfig | 1 -
> board/rockchip/evb_rk3328/MAINTAINERS | 6 +
> configs/roc-cc-rk3328_defconfig | 95 +++++++++
> doc/README.rockchip | 9 +-
> 7 files changed, 384 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3328-roc-cc.dts
> create mode 100644 configs/roc-cc-rk3328_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 4fee5cc489..db4b987c4c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -104,7 +104,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
>
> dtb-$(CONFIG_ROCKCHIP_RK3328) += \
> rk3328-evb.dtb \
> - rk3328-rock64.dtb
> + rk3328-rock64.dtb \
> + rk3328-roc-cc.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RK3368) += \
> rk3368-lion.dtb \
> diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> new file mode 100644
> index 0000000000..cf3452ea94
> --- /dev/null
> +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
> + */
> +
> +#include "rk3328-u-boot.dtsi"
> +#include "rk3328-sdram-ddr4-666.dtsi"
> +/ {
> + chosen {
> + u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
> + };
> +};
> +
> +&usb_host0_xhci {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts
> new file mode 100644
> index 0000000000..2bfb261bad
> --- /dev/null
> +++ b/arch/arm/dts/rk3328-roc-cc.dts
> @@ -0,0 +1,260 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + */
> +
> +/dts-v1/;
> +#include "rk3328.dtsi"
> +
> +/ {
> + model = "Firefly ROC-RK3328-CC";
> + compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + gmac_clkin: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "gmac_clkin";
> + #clock-cells = <0>;
> + };
> +
> + vcc3v3_sdmmc: sdmmc-pwren {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v0_otg: vcc5v0-otg-drv {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + regulator-name = "vcc5v0_otg";
> + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
> + status = "disabled"; //usb host xhci and usb otg use the same gpio to enable power
> + compatible = "regulator-fixed";
> + enable-active-high;
> + regulator-name = "vcc5v0_host_xhci";
> + gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + vcc_phy: vcc-phy-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_phy";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + };
> +};
> +
> +&saradc {
> + status = "okay";
> +};
> +
> +&uart2 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + disable-wp;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
> + status = "okay";
> +};
> +
> +&emmc {
> + u-boot,dm-pre-reloc;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + supports-emmc;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
> + status = "okay";
> +};
> +
> +&gmac2io {
> + phy-supply = <&vcc_phy>;
> + phy-mode = "rgmii";
> + clock_in_out = "input";
> + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
> + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmiim1_pins>;
> + tx_delay = <0x26>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb20_otg {
> + vbus-supply = <&vcc5v0_otg>;
> + status = "okay";
> +};
> +
> +&usb_host0_xhci {
> + vbus-supply = <&vcc5v0_host_xhci>;
> + status = "okay";
> + maximum-speed = "high-speed";
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk805: pmic at 18 {
> + compatible = "rockchip,rk805";
> + status = "okay";
> + reg = <0x18>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + gpio-controller;
> + #gpio-cells = <2>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk805-clkout2";
> +
> + pwrkey {
> + status = "okay";
> + };
> +
> + led1 {
> + label = "standby";
> + };
> +
> + led2 {
> + label = "power";
> + };
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-name = "vdd_logic";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <6001>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vdd_arm: DCDC_REG2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <6001>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-name = "vcc_io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vdd_18: LDO_REG1 {
> + regulator-name = "vdd_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_18emmc: LDO_REG2 {
> + regulator-name = "vcc_18emmc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-name = "vdd_10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> + };
> + };
> +};
> +
> +&pinctrl {
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio1_d0 */
> + };
> + };
> +};
> diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig
> index d13a169022..7fc4af9a4d 100644
> --- a/arch/arm/mach-rockchip/rk3328/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3328/Kconfig
> @@ -40,5 +40,4 @@ config TPL_STACK
> default 0xff098000
>
> source "board/rockchip/evb_rk3328/Kconfig"
> -
> endif
> diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS
> index c661d2e06a..86aefc801a 100644
> --- a/board/rockchip/evb_rk3328/MAINTAINERS
> +++ b/board/rockchip/evb_rk3328/MAINTAINERS
> @@ -10,3 +10,9 @@ M: Matwey V. Kornilov <matwey.kornilov at gmail.com>
> S: Maintained
> F: configs/rock64-rk3328_defconfig
> F: arch/arm/dts/rk3328-rock64-u-boot.dtsi
> +
> +ROC-RK3328-CC
> +M: Loic Devulder <ldevulder at suse.com>
> +S: Maintained
> +F: configs/roc-rk3328-cc_defconfig
> +F: arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
> diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
> new file mode 100644
> index 0000000000..2ea4616401
> --- /dev/null
> +++ b/configs/roc-cc-rk3328_defconfig
> @@ -0,0 +1,95 @@
> +CONFIG_SMBIOS_MANUFACTURER="firefly"
> +CONFIG_SMBIOS_PRODUCT_NAME="roc-rk3328-cc"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ENV_OFFSET=0x3F8000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
> +CONFIG_TPL_LIBCOMMON_SUPPORT=y
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb"
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_TPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_TPL_OF_PLATDATA=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_TPL_DM=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_TPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_TPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +# CONFIG_TPL_SYSRESET is not set
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +# CONFIG_USB_DWC3_GADGET is not set
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 9b699b9ae5..9aeee37900 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -52,12 +52,13 @@ Two RK3308 boards are supported:
> - EVB RK3308 - use evb-rk3308 configuration
> - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
>
> -Two RK3328 board are supported:
> +Three RK3328 boards are supported:
>
> - - EVB RK3328 - use evb-rk3328_defconfig
> - - Pine64 Rock64 board - use rock64-rk3328_defconfig
> + - EVB RK3328 - use evb_rk3328 configuration
> + - Pine64 Rock64 board - use rock64-rk3328 configuration
> + - ROC-RK3328-CC - use roc-cc-rk3328 configuration
>
> -Size RK3399 boards are supported (aarch64):
> +Six RK3399 boards are supported (aarch64):
>
> - EBV RK3399 - use evb_rk3399 configuration
> - Firefly RK3399 - use the firefly_rk3399 configuration
More information about the U-Boot
mailing list