[PATCH v1 0/2] Add roc-rk3328-cc support

[Peter Geis]

On Fri, Feb 14, 2020 at 9:47 AM Loic Devulder <ldevulder at suse.com> wrote:
>
> This serie add support for roc-rk33239 board from Firefly/Libre
> Computer:
>   - add missing L2 cache entry in rk3328 dts
>   - add roc-rk3328-cc board support
>
> With this we can successfully boot the board with mainline U-Boot and
> binary blob firmwares. Boot with ATF and TPL/SPL partially works: TPL
> works fine but SPL fails to find a bootable device.

I have tpl/spl fully enabled on this device privately.
The SPL fails to find a boot device when booted from the sdcard.
It successfully boots from emmc though.
I believe this is due to the 3.3/1.8 mode switch.

Have you tested off emmc with your patch?

>
> I didn't used the DTS from Linux kernel: USB2 fails in that case, this
> should be corrected but maybe later?
>
> Note: sorry if this serie has been send twice, but I had issue with my
> email server...
>
>
> Loic Devulder (2):
>   rockchip: rk3328: dts: add L2 cache entry
>   rockchip: rk3328: add roc-rk3328-cc support
>
>  arch/arm/dts/Makefile                  |   3 +-
>  arch/arm/dts/rk3328-roc-cc-u-boot.dtsi |  16 ++
>  arch/arm/dts/rk3328-roc-cc.dts         | 260 +++++++++++++++++++++++++
>  arch/arm/dts/rk3328.dtsi               |  25 ++-
>  arch/arm/mach-rockchip/rk3328/Kconfig  |   1 -
>  board/rockchip/evb_rk3328/MAINTAINERS  |   6 +
>  configs/roc-cc-rk3328_defconfig        |  95 +++++++++
>  doc/README.rockchip                    |   9 +-
>  8 files changed, 408 insertions(+), 7 deletions(-)
>  create mode 100644 arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3328-roc-cc.dts
>  create mode 100644 configs/roc-cc-rk3328_defconfig
>
> --
> 2.25.0
>