[PATCH] ARM: socfpga: Add initial support for the ABB SECU board

[Holger Brunck]

Hi Marek and Wolfgang,

> > In message <20200217173249.4805-1-marex at denx.de> you wrote:
> >>
> >>  board/keymile/Kconfig                   |  11 +-
> >>  board/keymile/common/ivm.c              |  18 +-
> >>  board/keymile/secu1/Makefile            |   7 +
> >>  board/keymile/secu1/qts/iocsr_config.h  | 694
> >> ++++++++++++++++++++++++  board/keymile/secu1/qts/pinmux_config.h
> | 218 ++++++++
> >>  board/keymile/secu1/qts/pll_config.h    |  83 +++
> >>  board/keymile/secu1/qts/sdram_config.h  | 327 +++++++++++
> >>  board/keymile/secu1/socfpga.c           |  67 +++
> > ...
> >> +    select VENDOR_KM
> >
> > Would it make sense to rename keymile -> abb (or abb-ch) here (ditto
> > for KM in the config options / macro names) ?
> 
> This is more of a question for Holger, but I agree the renaming should
> eventually happen to align it with current state of things.

yes I have it on my list to rename this folder to wcom (wiredcom)  or wcom-abb.
But this goes for all the boards in this folder and not only secu. But until know
I didn't find the right time to do it as we have currently several activities ongoing for
u-boot (re-aligning other boards and migrating PPC to DTS).

I assume SECU goes for v2020.07 as we are too late for v2020.04 or?  I think I can
spend some time for the next merge window to tackle this folder issue for all boards
and then we rebase and adapt this  patch.
 
Best regards
Holger