[PATCH 1/2] sunxi: Move common defconfig options to Kconfig

Andre Przywara andre.przywara at arm.com
Thu Feb 20 18:51:14 CET 2020


Some config symbols are found in *almost* every _defconfig file for
Allwinner boards, because those options are actually a platform choice,
and not a per-board decision.
Some of these options are older, some have recently been added.

Move those options to be set for all Allwinner boards in their
respective Kconfig files.

The rationales are as follows:
- NR_DRAM_BANKS: All Allwinner SoC map DRAM at one contiguous region of
  address space only, starting at 1 GB. So it's always one bank.
- SPL_{DOS,EFI}_PARTITION: The Allwinner SPL does only support raw MMC
  accesses, we don't care about filesystems or partitions in there, so
  there is no need to define those symbols at all.
- USE_PREBOOT: We start USB early when a keyboard is configured, using the
  preboot env variable, so we need to set this variable.
- SYS_RELOC_GD_ENV_ADDR: We don't specify any ENV_ADDR, so need this
  symbol to be set (according to 8d8ee47e03e).
- SYS_USB_EVENT_POLL_VIA_INT_QUEUE: According to commit eab9433aa55428,
  specifying this reduces the latency of the USB keyboard handling, so
  this was formerly enabled in config headers for all Allwinner boards.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 Kconfig             | 1 +
 arch/arm/Kconfig    | 2 ++
 disk/Kconfig        | 2 ++
 drivers/usb/Kconfig | 1 +
 4 files changed, 6 insertions(+)

diff --git a/Kconfig b/Kconfig
index 66148ce477..b4864cdf8d 100644
--- a/Kconfig
+++ b/Kconfig
@@ -115,6 +115,7 @@ config ENV_VARS_UBOOT_CONFIG
 
 config NR_DRAM_BANKS
 	int "Number of DRAM banks"
+	default 1 if ARCH_SUNXI
 	default 4
 	help
 	  This defines the number of DRAM banks.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8d9f7fcce7..02378b4fae 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -999,6 +999,8 @@ config ARCH_SUNXI
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select SPL_USE_TINY_PRINTF
+	select USE_PREBOOT
+	select SYS_RELOC_GD_ENV_ADDR
 	imply CMD_DM
 	imply CMD_GPT
 	imply CMD_UBI if MTD_RAW_NAND
diff --git a/disk/Kconfig b/disk/Kconfig
index 28fb81c2ee..747275c2ba 100644
--- a/disk/Kconfig
+++ b/disk/Kconfig
@@ -46,6 +46,7 @@ config DOS_PARTITION
 config SPL_DOS_PARTITION
 	bool "Enable MS Dos partition table for SPL"
 	depends on SPL && PARTITIONS
+	default n if ARCH_SUNXI
 	default y if DOS_PARTITION
 
 config ISO_PARTITION
@@ -112,6 +113,7 @@ config EFI_PARTITION_ENTRIES_OFF
 config SPL_EFI_PARTITION
 	bool "Enable EFI GPT partition table for SPL"
 	depends on  SPL && PARTITIONS
+	default n if ARCH_SUNXI
 	default y if EFI_PARTITION
 
 config PARTITION_UUIDS
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index bea4a92b61..928a89133c 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -108,6 +108,7 @@ config USB_KEYBOARD_FN_KEYS
 
 choice
 	prompt "USB keyboard polling"
+	default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if ARCH_SUNXI
 	default SYS_USB_EVENT_POLL
 	---help---
 	  Enable a polling mechanism for USB keyboard.
-- 
2.17.1



More information about the U-Boot mailing list