[PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO

Troy Kisky troy.kisky at boundarydevices.com
Thu Feb 20 22:35:16 CET 2020


Enable driver model for Video to remove compiler warning.
To enable display, issue

setenv stdout serial,vidconsole;

Add CONFIG_DM_VIDEO to all defconfigs whose board is
nitrogen6x.
        mx6qsabrelite_defconfig
        nitrogen6dl2g_defconfig
        nitrogen6dl_defconfig
        nitrogen6q2g_defconfig
        nitrogen6q_defconfig
        nitrogen6s1g_defconfig
	nitrogen6s_defconfig

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>

diff --git a/arch/arm/dts/imx6qdl-sabrelite.dtsi b/arch/arm/dts/imx6qdl-sabrelite.dtsi
index 673a19c3df..86375156b9 100644
--- a/arch/arm/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/dts/imx6qdl-sabrelite.dtsi
@@ -195,6 +195,15 @@
 		pwm_lvds = &pwm4;
 	};
 
+	backlight_lvds: backlight-lvds {
+		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <8>;
+		power-supply = <&reg_3p3v>;
+		pwms = <&pwm4 0 5000000>;
+		status = "okay";
+	};
+
 	chosen {
 		stdout-path = &uart2;
 	};
@@ -219,6 +228,17 @@
 		gpio = GP_REG_USBOTG;
 		enable-active-high;
 	};
+
+	panel-lvds0 {
+		backlight = <&backlight_lvds>;
+		compatible = "hannstar,hsd100pxn1";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &ecspi1 {
@@ -281,6 +301,11 @@
 	};
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -316,6 +341,22 @@
 	status = "okay";
 };
 
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		status = "okay";
+
+		port at 4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	status = "okay";
 };
diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig
index a85bfe0769..1171192c33 100644
--- a/configs/mx6qsabrelite_defconfig
+++ b/configs/mx6qsabrelite_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x60000
@@ -9,7 +10,6 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
@@ -68,6 +68,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig
index d10162578a..07814f3ef4 100644
--- a/configs/nitrogen6dl2g_defconfig
+++ b/configs/nitrogen6dl2g_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -72,6 +72,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig
index dd07ce0d58..7a0de9d0e0 100644
--- a/configs/nitrogen6dl_defconfig
+++ b/configs/nitrogen6dl_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -72,6 +72,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig
index 91b85ea708..69698d94a0 100644
--- a/configs/nitrogen6q2g_defconfig
+++ b/configs/nitrogen6q2g_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -74,6 +74,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig
index 009382fec0..6d11b90f0a 100644
--- a/configs/nitrogen6q_defconfig
+++ b/configs/nitrogen6q_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -74,6 +74,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig
index c0f4261930..f7fcae4f0a 100644
--- a/configs/nitrogen6s1g_defconfig
+++ b/configs/nitrogen6s1g_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -72,6 +72,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig
index 1dc9d5377a..db557633b7 100644
--- a/configs/nitrogen6s_defconfig
+++ b/configs/nitrogen6s_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
@@ -9,7 +10,6 @@ CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -72,6 +72,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-- 
2.18.0



More information about the U-Boot mailing list