[PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO

[Fabio Estevam]

Hi Troy,

On Thu, Feb 20, 2020 at 6:37 PM Troy Kisky
<troy.kisky at boundarydevices.com> wrote:
>
> Enable driver model for Video to remove compiler warning.
> To enable display, issue
>
> setenv stdout serial,vidconsole;
>
> Add CONFIG_DM_VIDEO to all defconfigs whose board is
> nitrogen6x.
>         mx6qsabrelite_defconfig
>         nitrogen6dl2g_defconfig
>         nitrogen6dl_defconfig
>         nitrogen6q2g_defconfig
>         nitrogen6q_defconfig
>         nitrogen6s1g_defconfig
>         nitrogen6s_defconfig
>
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
>
> diff --git a/arch/arm/dts/imx6qdl-sabrelite.dtsi b/arch/arm/dts/imx6qdl-sabrelite.dtsi
> index 673a19c3df..86375156b9 100644
> --- a/arch/arm/dts/imx6qdl-sabrelite.dtsi
> +++ b/arch/arm/dts/imx6qdl-sabrelite.dtsi
> @@ -195,6 +195,15 @@
>                 pwm_lvds = &pwm4;
>         };
>
> +       backlight_lvds: backlight-lvds {
> +               brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> +               compatible = "pwm-backlight";
> +               default-brightness-level = <8>;
> +               power-supply = <&reg_3p3v>;
> +               pwms = <&pwm4 0 5000000>;
> +               status = "okay";
> +       };
> +
>         chosen {
>                 stdout-path = &uart2;
>         };
> @@ -219,6 +228,17 @@
>                 gpio = GP_REG_USBOTG;
>                 enable-active-high;
>         };
> +
> +       panel-lvds0 {
> +               backlight = <&backlight_lvds>;
> +               compatible = "hannstar,hsd100pxn1";

Instead of adding only the LVDS pieces here, what about resyncing the
whole dts with the upstream kernel on a separate patch ?