[PATCH 4/5] ARM: dts: stm32: Add missing ETHCK clock to ethernet node

Marek Vasut marex at denx.de
Fri Jan 10 01:28:38 CET 2020


Add missing 'eth-ck' clock to the ethernet node. These clock are used to
generate external clock signal for the PHY in case 'st,eth_ref_clk_sel'
is specified.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
---
 arch/arm/dts/stm32mp157c.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi
index 6c670cf9a3..41aea75213 100644
--- a/arch/arm/dts/stm32mp157c.dtsi
+++ b/arch/arm/dts/stm32mp157c.dtsi
@@ -1404,11 +1404,13 @@
 			clock-names = "stmmaceth",
 				      "mac-clk-tx",
 				      "mac-clk-rx",
+				      "eth-ck",
 				      "ethstp",
 				      "syscfg-clk";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
+				 <&rcc ETHCK_K>,
 				 <&rcc ETHSTP>,
 				 <&rcc SYSCFG>;
 			st,syscon = <&syscfg 0x4>;
-- 
2.24.1



More information about the U-Boot mailing list