SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01

[Guillaume Gardet]

> -----Original Message-----
> From: Jagan Teki <jagan at amarulasolutions.com>
> Sent: 10 January 2020 11:13
> To: Guillaume Gardet <Guillaume.Gardet at arm.com>
> Cc: Simon Glass <sjg at chromium.org>; Lin Huang <hl at rock-chips.com>; u-
> boot at lists.denx.de
> Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01
> 
> On Fri, Jan 10, 2020 at 3:12 PM Guillaume Gardet <Guillaume.Gardet at arm.com>
> wrote:
> >
> > Hi,
> >
> > since 2020.01, SPL image is too large for rk3288 boards (at least firefly-rk3288
> and tinker-rk3288), because I get respectively:
> >   [  356s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
> spl.rksd
> >   [  356s] Error: SPL image is too large (size 0x9800 than 0x8000)
> > And:
> >   [  305s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
> spl.rksd
> >   [  305s] Error: SPL image is too large (size 0xb800 than 0x8000)
> 
> Both the board now TPL-enabled, so create boot image with TPL then
> concatenate SPL.

What do you mean by "then concatenate SPL"?