SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01

[Jagan Teki]

On Fri, Jan 10, 2020 at 4:02 PM Guillaume Gardet
<Guillaume.Gardet at arm.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Jagan Teki <jagan at amarulasolutions.com>
> > Sent: 10 January 2020 11:13
> > To: Guillaume Gardet <Guillaume.Gardet at arm.com>
> > Cc: Simon Glass <sjg at chromium.org>; Lin Huang <hl at rock-chips.com>; u-
> > boot at lists.denx.de
> > Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01
> >
> > On Fri, Jan 10, 2020 at 3:12 PM Guillaume Gardet <Guillaume.Gardet at arm.com>
> > wrote:
> > >
> > > Hi,
> > >
> > > since 2020.01, SPL image is too large for rk3288 boards (at least firefly-rk3288
> > and tinker-rk3288), because I get respectively:
> > >   [  356s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
> > spl.rksd
> > >   [  356s] Error: SPL image is too large (size 0x9800 than 0x8000)
> > > And:
> > >   [  305s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
> > spl.rksd
> > >   [  305s] Error: SPL image is too large (size 0xb800 than 0x8000)
> >
> > Both the board now TPL-enabled, so create boot image with TPL then
> > concatenate SPL.
>
> What do you mean by "then concatenate SPL"?

₹ ./tools/mkimage -n rk3288 -T rksd -d tpl/u-boot-tpl.bin out
Image Type:   Rockchip RK32 (SD/MMC) boot image
Init Data Size: 20480 bytes
₹ cat spl/u-boot-spl-dtb.bin >> out