SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01

[Guillaume Gardet]

> -----Original Message-----
> From: Jagan Teki <jagan at amarulasolutions.com>
> Sent: 10 January 2020 11:37
> To: Guillaume Gardet <Guillaume.Gardet at arm.com>
> Cc: Simon Glass <sjg at chromium.org>; Lin Huang <hl at rock-chips.com>; u-
> boot at lists.denx.de; nd <nd at arm.com>
> Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01
> 
> On Fri, Jan 10, 2020 at 4:02 PM Guillaume Gardet <Guillaume.Gardet at arm.com>
> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: Jagan Teki <jagan at amarulasolutions.com>
> > > Sent: 10 January 2020 11:13
> > > To: Guillaume Gardet <Guillaume.Gardet at arm.com>
> > > Cc: Simon Glass <sjg at chromium.org>; Lin Huang <hl at rock-chips.com>;
> > > u- boot at lists.denx.de
> > > Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288
> > > since 2020.01
> > >
> > > On Fri, Jan 10, 2020 at 3:12 PM Guillaume Gardet
> > > <Guillaume.Gardet at arm.com>
> > > wrote:
> > > >
> > > > Hi,
> > > >
> > > > since 2020.01, SPL image is too large for rk3288 boards (at least
> > > > firefly-rk3288
> > > and tinker-rk3288), because I get respectively:
> > > >   [  356s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T
> > > > rksd u-boot-
> > > spl.rksd
> > > >   [  356s] Error: SPL image is too large (size 0x9800 than 0x8000)
> > > > And:
> > > >   [  305s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T
> > > > rksd u-boot-
> > > spl.rksd
> > > >   [  305s] Error: SPL image is too large (size 0xb800 than 0x8000)
> > >
> > > Both the board now TPL-enabled, so create boot image with TPL then
> > > concatenate SPL.
> >
> > What do you mean by "then concatenate SPL"?
> 
> ₹ ./tools/mkimage -n rk3288 -T rksd -d tpl/u-boot-tpl.bin out
> Image Type:   Rockchip RK32 (SD/MMC) boot image
> Init Data Size: 20480 bytes
> ₹ cat spl/u-boot-spl-dtb.bin >> out

Ok, thanks!

Guillaume