[PATCH 08/10] arm: mvebu: enable working default boot support
Joel Johnson
mrjoel at lixil.net
Sat Jan 11 22:07:48 CET 2020
I've found an issue in testing with the ENV_IS_IN_X values, they need to
be changed from a "select" to an "imply" to enable disabling default
values and support booting from MMC and having flash in SPI (or the
other way around).
I have the change queued for either a second patch submission (pending
additional review and comments), or subsequent patch.
Joel
On 2020-01-11 12:36, Joel Johnson wrote:
> With the move to driver model usage, ensure that the required driver
> support for SPI and MMC booting is available in SPL.
>
> Tested on SolidRun ClearFog devices.
>
> Signed-off-by: Joel Johnson <mrjoel at lixil.net>
> ---
>
> arch/arm/mach-mvebu/Kconfig | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index c6a1a0a944..b3239b2b01 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -234,9 +234,19 @@ choice
>
> config MVEBU_SPL_BOOT_DEVICE_SPI
> bool "SPI NOR flash"
> + select ENV_IS_IN_SPI_FLASH
> + select SPL_DM_SPI
> + select SPL_MTD_SUPPORT
> + select SPL_SPI_FLASH_SUPPORT
> + select SPL_SPI_LOAD
> + select SPL_SPI_SUPPORT
>
> config MVEBU_SPL_BOOT_DEVICE_MMC
> bool "SDIO/MMC card"
> + select ENV_IS_IN_MMC
> + # GPIO required for SD card presence detection line
> + select SPL_DM_GPIO
> + select SPL_DM_MMC
> select SPL_LIBDISK_SUPPORT
>
> config MVEBU_SPL_BOOT_DEVICE_SATA
More information about the U-Boot
mailing list