[PATCH 08/10] arm: mvebu: enable working default boot support

[Stefan Roese]

Hi Joel,

On 11.01.20 22:07, Joel Johnson wrote:
> I've found an issue in testing with the ENV_IS_IN_X values, they need to
> be changed from a "select" to an "imply" to enable disabling default
> values and support booting from MMC and having flash in SPI (or the
> other way around).
> 
> I have the change queued for either a second patch submission (pending
> additional review and comments), or subsequent patch.

As you will most likely rebase your patches on top of Baruch's patches,
please change this patch to using "imply" then.

Thanks,
Stefan
  
> Joel
> 
> On 2020-01-11 12:36, Joel Johnson wrote:
>> With the move to driver model usage, ensure that the required driver
>> support for SPI and MMC booting is available in SPL.
>>
>> Tested on SolidRun ClearFog devices.
>>
>> Signed-off-by: Joel Johnson <mrjoel at lixil.net>
>> ---
>>
>>   arch/arm/mach-mvebu/Kconfig | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
>> index c6a1a0a944..b3239b2b01 100644
>> --- a/arch/arm/mach-mvebu/Kconfig
>> +++ b/arch/arm/mach-mvebu/Kconfig
>> @@ -234,9 +234,19 @@ choice
>>
>>   config MVEBU_SPL_BOOT_DEVICE_SPI
>>   	bool "SPI NOR flash"
>> +	select ENV_IS_IN_SPI_FLASH
>> +	select SPL_DM_SPI
>> +	select SPL_MTD_SUPPORT
>> +	select SPL_SPI_FLASH_SUPPORT
>> +	select SPL_SPI_LOAD
>> +	select SPL_SPI_SUPPORT
>>
>>   config MVEBU_SPL_BOOT_DEVICE_MMC
>>   	bool "SDIO/MMC card"
>> +	select ENV_IS_IN_MMC
>> +	# GPIO required for SD card presence detection line
>> +	select SPL_DM_GPIO
>> +	select SPL_DM_MMC
>>   	select SPL_LIBDISK_SUPPORT
>>
>>   config MVEBU_SPL_BOOT_DEVICE_SATA

Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de