[PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration

[Fabio Estevam]

On Thu, Jan 16, 2020 at 4:40 AM Jorge Ramirez-Ortiz, Foundries
<jorge at foundries.io> wrote:
>
> On 16/01/20 02:22:35, Peng Fan wrote:
> > > Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad
> > > configuration
> > >
> > > The mux mode is embedded in the PAD definition and therefore there is no
> > > need to repeat it in the PAD configuration value (more over since this
> > > information will be masked out when the configuration value is applied).
> >
> > Has this been accepted by Shawn?
>
> added to DL now

Mainline dts does not have backlight support, so this only affects U-Boot.