[PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration

[Jorge Ramirez-Ortiz, Foundries]

On 17/01/20 08:51:45, Fabio Estevam wrote:
> On Thu, Jan 16, 2020 at 4:40 AM Jorge Ramirez-Ortiz, Foundries
> <jorge at foundries.io> wrote:
> >
> > On 16/01/20 02:22:35, Peng Fan wrote:
> > > > Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad
> > > > configuration
> > > >
> > > > The mux mode is embedded in the PAD definition and therefore there is no
> > > > need to repeat it in the PAD configuration value (more over since this
> > > > information will be masked out when the configuration value is applied).
> > >
> > > Has this been accepted by Shawn?
> >
> > added to DL now
> 
> Mainline dts does not have backlight support, so this only affects U-Boot.

yes, the dts is only incorrect in uboot (ie, any of the mux values
that could be specified in the pad configuration field are just
ignored)