[PATCH 5/5] ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board

[Marek Vasut]

On 1/17/20 5:32 PM, Patrick DELAUNAY wrote:
> Hi Marek,

Hi,

>> From: Patrick DELAUNAY
>> Sent: lundi 13 janvier 2020 15:05
>>
>> Hi Marek,
>>
>>> From: Marek Vasut <marex at denx.de>
>>> Sent: vendredi 10 janvier 2020 01:29
>>>
>>> Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board.
>>> This is an SoM with STM32MP157C and an evaluation kit. The baseboard
>>> provides Ethernet, UART, USB, CAN and optional display.
>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>>> Cc: Patrice Chotard <patrice.chotard at st.com>
>>> ---
> 
> For information, I merge the serie, except this patch 5/5 on master brach and I sent a pull request for u-boot-stm32-20200117.
> 
> For this patch, I propose a rebase and also many modification liked to my previous remark
> (I remove ST only parts for stboard command, and also led and key management) .
> 
> This proposal is present in the branch https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/next
> 	https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/db48e11b1eccf23f3f9ba26e886a798e74df6a01
> 
> your initial patch is in applied https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh
> 	
> 
> Can you test the "next" branch and check the difference with your initial patch ( applied in dh branch
> https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh 
> => https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/0ab3ce72f82b946ac0924dfcdc082792f325eb68 )
> 
> I hope that I don't remove something really present on the SOM.
> 
> If you are OK, can you send a V2 version with the "next" branch content and I will integrate it in master branch for next pull request.

Will do. I will rebase on master once your PR is in and then send V2.

[...]