[PATCH v3 07/10] configs: fu540: Add config file for U-boot SPL

[Pragnesh Patel]

With sifive_fu540_spl_defconfig:

U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with
u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT
image u-boot.itb from 1st partition of SD card (replace fw_payload.bin
with u-boot.itb) into RAM.

U-boot SPL expects u-boot.itb FIT image in the 1st partition of SD
card irrespective of GUID

Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
 configs/sifive_fu540_spl_defconfig | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 configs/sifive_fu540_spl_defconfig

diff --git a/configs/sifive_fu540_spl_defconfig b/configs/sifive_fu540_spl_defconfig
new file mode 100644
index 0000000000..4053743f4c
--- /dev/null
+++ b/configs/sifive_fu540_spl_defconfig
@@ -0,0 +1,26 @@
+CONFIG_RISCV=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_TARGET_SIFIVE_FU540=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_MISC=y
+CONFIG_EMEMORY_OTP=y
+CONFIG_MISC_INIT_R=y
+CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_OF_SEPARATE=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_MTD=y
+CONFIG_SPL=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=1
+CONFIG_SPL_CLK=y
+CONFIG_SPL_PAYLOAD="u-boot.itb"
-- 
2.17.1