[PATCH v2][ 1/3] tbs2910: disable fuse command

Denis 'GNUtoo' Carikli GNUtoo at cyberdimension.org
Tue Jan 28 18:04:16 CET 2020


The fuse command is not needed for booting or during usual
users interactions with u-boot.

As that the resulting u-boot.imx image is already very
close to the size limit, removing the fuse command shouldn't
hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola
GNU/Linux distribution, it shrinks the image from 392192 to
388096 bytes.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org>
---
 configs/tbs2910_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 61d4c74324..0f12b94257 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_BOOTM_VXWORKS is not set
 # CONFIG_CMD_FDT is not set
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FUSE is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-- 
2.24.1



More information about the U-Boot mailing list