[PATCH v2][ 2/3] tbs2910: disable loadb and loads commands

[Denis 'GNUtoo' Carikli]

The loadb and loads commands are not needed for booting.

There are also more reliable and faster alternatives to
loadb and loads that can be used with the current configuration.

As that the resulting u-boot.imx image is already very close
to the size limit, removing the loadb and loads commands
shouldn't hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola
GNU/Linux distribution, it shrinks the image from 388096 to
384000 bytes.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org>
---
 configs/tbs2910_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 0f12b94257..0e91eeffd4 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -27,6 +27,8 @@ CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FUSE is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_PCI=y
-- 
2.24.1