[PATCH 0/2] u-boot support for ODROID-C4

[Anand Moon]

Hi Neil,

On Wed, 1 Jul 2020 at 18:38, Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> Hi,
>
> On 01/07/2020 13:31, Anand Moon wrote:
> > Hi Neil,
> >
> > On Wed, 1 Jul 2020 at 13:22, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>
> >> Hi,
> >>
> >> On 30/06/2020 18:02, Anand Moon wrote:
> >>> Hi Neil,
> >>>
> >>> On Tue, 30 Jun 2020 at 18:30, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> On 30/06/2020 13:33, Anand Moon wrote:
> >>>>> Hi Beniamino,
> >>>>>
> >>>>> On Wed, 6 May 2020 at 01:53, Beniamino Galvani <b.galvani at gmail.com> wrote:
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> these two patches add initial u-boot support for Hardkernel ODROID-C4.
> >>>>>>
> >>>>>> https://wiki.odroid.com/odroid-c4/odroid-c4
> >>>>>>
> >>>>>> Beniamino Galvani (2):
> >>>>>>   arm: dts: import ODROID-C4 device tree
> >>>>>>   boards: amlogic: add ODROID-C4 support
> >>>>>>
> >>>>>
> >>>>> Can you respin this patches, I would like to see these get merged in
> >>>>> the current u-boot release
> >>>>>
> >>>>> -Anand
> >>>>>
> >>>>
> >>>> The Odroid-C4 could re-use the new Odroid-N2 board support I submitted at [1]
> >>>>
> >>>> Anand, is the MAC address stored stored the same way on the C4 ?
> >>>>
> >>>> Neil
> >>>>
> >>>> [1] https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstrong@baylibre.com/
> >>>
> >>> I gave this patches a try on latest u-boot but I cannot make my Odroid
> >>> C4 to boot up uinsg microSD card and eMMC
> >>> Here are the logs.
> >>
> >> The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI.
> >>
> >> Can you test my custodian test branch with my C4 support patchset ?
> >>
> >> https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-test
> >>
> >> This one is used in Armbian 5.4 release and our KernelCI lab.
> >>
> >> Neil
> >>
> >
> > Thanks.
> >
> > There seems to be a typo in the build instructions in #
> > doc/board/amlogic/odroid-c4.rst
> > instead of *g12b*, it should be *g12a*
> >
> > See below I get following build warning, which I fix locally,
> >
> > ./buildc4c.sh: line 78:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> > ./buildc4c.sh: line 81:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> > ./buildc4c.sh: line 84:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> > ./buildc4c.sh: line 87:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> > ./buildc4c.sh: line 90:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> > ./buildc4c.sh: line 92:
> > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> > No such file or directory
> >
> > After that fix I am able to boot my board using eMMC and microSD card.
>
> Thanks for testing, I'll push my serie rebased on v5.8-rc1 and fix this typo.
>
> Neil
>

Thanks, I see the same issue with random mac address just like N2.

-Anand