July 2020 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jul 1 05:02:33 CEST 2020
Ending: Fri Jul 31 23:42:13 CEST 2020
Messages: 3942

• [EXT] Re: [PATCH] rtc: pcf2127: fix uninitialized variable msg   Biwen Li (OSS)
• [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO   Priyanka Jain (OSS)
• [PATCH] configs: ls1043aqds: Configure QSPI related configs   Priyanka Jain (OSS)
• [PATCH] configs: ls1046aqds: Configure QSPI related configs   Priyanka Jain (OSS)
• [PATCH 1/1] ls1021a: Add DDR errata num 008109   Priyanka Jain (OSS)
• [PATCH] configs: ls1012a/ls1046a: Define CONFIG_ENV_OVERWRITE   Priyanka Jain (OSS)
• [PATCH v4 1/6] net: introduce DSA class for Ethernet switches   Priyanka Jain (OSS)
• [PATCH v4 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Priyanka Jain (OSS)
• [PATCH v4 2/6] drivers: net: add a DSA sandbox driver   Priyanka Jain (OSS)
• [PATCH v3 2/2] board: kontron: add sl28 support   Priyanka Jain (OSS)
• [PATCH 3/3] gpio: mpc8xxx: support fsl-layerscape platform.   Priyanka Jain (OSS)
• [PATCH v4 2/6] drivers: net: add a DSA sandbox driver   Priyanka Jain (OSS)
• [PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Priyanka Jain (OSS)
• Pinebook Pro keyboard (RK3399 OHCI)?   Arnaud Patard (Rtp)
• Pinebook Pro keyboard (RK3399 OHCI)?   Arnaud Patard (Rtp)
• [RFC PATCH v2] sunxi: Add UART4 console support for A64   Nazım Gediz AYDINDOĞMUŞ
• [RFC PATCH v2] sunxi: Add UART4 console support for A64   Nazım Gediz AYDINDOĞMUŞ
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Faiz Abbas
• [PATCH 00/13] Add support for USB host and peripheral bootmodes on am65x-idk   Faiz Abbas
• [PATCH 01/13] spl: usb: Create an API spl_usb_load()   Faiz Abbas
• [PATCH 02/13] spl: usb: Only init usb once   Faiz Abbas
• [PATCH 03/13] armv7R: K3: am654: Use full malloc in SPL both pre and post reloc   Faiz Abbas
• [PATCH 04/13] arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB   Faiz Abbas
• [PATCH 05/13] arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config   Faiz Abbas
• [PATCH 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes   Faiz Abbas
• [PATCH 07/13] arm: mach-k3: am6_init: Add support for USB boot mode   Faiz Abbas
• [PATCH 08/13] arm: dts: k3-am654-r5-base-board: Add USB0 nodes   Faiz Abbas
• [PATCH 09/13] arm: dts: k3-am654-base-board: Add support for USB0 in SPL   Faiz Abbas
• [PATCH 10/13] configs: am65x_evm: Add support for DFU related configs   Faiz Abbas
• [PATCH 11/13] configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes   Faiz Abbas
• [PATCH 12/13] configs: Add new config for supporting USB mass storage boot   Faiz Abbas
• [PATCH 13/13] configs: Add defconfig for USB DFU bootmode   Faiz Abbas
• [PATCH] mmc: omap_hsmmc: Set 3.3V for IO voltage on all places   Faiz Abbas
• am654_sdhci: mmc fail to send stop cmd   Faiz Abbas
• am654_sdhci: mmc fail to send stop cmd   Faiz Abbas
• [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit   Faiz Abbas
• am654_sdhci: mmc fail to send stop cmd   Faiz Abbas
• [PATCH 14/18] mmc: am654_sdhci: Add support for J7200 devices   Faiz Abbas
• [PATCH 15/18] arm: dts: k3-j7200: Add dts support   Faiz Abbas
• [PATCH] mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value   Faiz Abbas
• [PATCH] mmc: sdhci: Setup HS modes based on HISPD bit   Faiz Abbas
• [PATCH] ls1028a: fix EFI boot   Poonam Aggrwal
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Stefan Agner
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Stefan Agner
• [PATCH v3 7/8] efi_loader: signature: rework for intermediate   Takahiro Akashi
• U-boot Designware SPI driver issue   Sean Anderson
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Sean Anderson
• [PATCH] Revert "riscv: Clean up IPI initialization code"   Sean Anderson
• [PATCH] Revert "riscv: Clean up IPI initialization code"   Sean Anderson
• [PATCH 26/31] clk: Drop dm.h header file in clk-provider.h   Sean Anderson
• [PATCH v3] riscv: Make SiFive HiFive Unleashed board boot again   Sean Anderson
• [PATCH] serial: Fix incorrect dependency for debug sifive serial driver   Sean Anderson
• [PATCH] serial: Fix incorrect dependency for debug sifive serial driver   Sean Anderson
• [PATCH v2] serial: Fix SIFIVE debug serial dependency   Sean Anderson
• [PATCH 0/6] riscv: Clean up timer drivers   Sean Anderson
• [PATCH 1/6] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH 2/6] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH 3/6] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH 4/6] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH 2/6] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 1/6] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• Kendryte build warnings   Sean Anderson
• Kendryte build warnings   Sean Anderson
• Kendryte build warnings   Sean Anderson
• [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Sean Anderson
• [PATCH 1/1] doc: riscv: Update documentation for Sipeed MAIX boards   Sean Anderson
• [PATCH v2 1/1] doc: riscv: Update documentation for Sipeed MAIX boards   Sean Anderson
• [PATCH v2 0/7] riscv: Clean up timer drivers   Sean Anderson
• [PATCH v2 1/7] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH v2 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v2 3/7] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH v2 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v2 5/7] riscv: clk: Add CLINT clock to kendryte clock driver   Sean Anderson
• [PATCH v2 6/7] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [RESEND PATCH] usb: max3420: add the gadget driver   Sean Anderson
• [PATCH 1/1] doc: riscv: debug UART for MAIX   Sean Anderson
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Sean Anderson
• [PATCH] riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc reg   Andes
• [PATCH 03/17] board: Introduce xenguest_arm64 board   Oleksandr Andrushchenko
• [PATCH 03/17] board: Introduce xenguest_arm64 board   Oleksandr Andrushchenko
• [PATCH v1 0/4] Agilex's clock driver updates and fixes   Chee Hong Ang
• [PATCH v1 1/4] clk: agilex: Add NAND clock support   Chee Hong Ang
• [PATCH v1 2/4] clk: agilex: Add clock enable support   Chee Hong Ang
• [PATCH v1 3/4] clk: agilex: Handle clock configuration differently in SPL and U-Boot proper   Chee Hong Ang
• [PATCH v1 4/4] clk: agilex: Additional membus writes for HPS PLL   Chee Hong Ang
• [PATCH] arm: socfpga: soc64: Remove PHY interface setup from misc arch init   Chee Hong Ang
• [PATCH] arm: socfpga: soc64: Initialize timer in SPL only   Chee Hong Ang
• [PATCH v1 3/4] clk: agilex: Handle clock configuration differently in SPL and U-Boot proper   Ang, Chee Hong
• [PATCH 01/18] board: ti: board_detect: Add stub functions for EEPROM detection apis   Suman Anna
• [PATCH 02/18] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined   Suman Anna
• [PATCH] board: ti: am65x: Update fdt fixup logic for interconnect nodes   Suman Anna
• [PATCH 0/2] Update TI K3 cbass interconnect node names   Suman Anna
• [PATCH 1/2] arm: dts: k3-am65: Fix interconnect node names   Suman Anna
• [PATCH 2/2] arm: dts: k3-j721e: Fix interconnect node names   Suman Anna
• [PATCH v2 05/18] arm: mach-k3: Move mmr_unlock to a common location   Suman Anna
• [PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Suman Anna
• [PATCH v2 08/18] arm: mach-k3: j721e: Fix unlocking control module registers   Suman Anna
• [PATCH v2 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM   Suman Anna
• [PATCH v2 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw   Suman Anna
• [PATCH v2 13/18] board: ti: j7200: Add board detection support for j7200   Suman Anna
• [PATCH v2] board: ti: am65x: Update fdt fixup logic for interconnect nodes   Suman Anna
• [PATCH 1/2] vboot: add support for multiple required keys   Thirupathaiah Annapureddy
• [PATCH v2 0/3] Add support for multiple required keys   Thirupathaiah Annapureddy
• [PATCH v2 1/3] vboot: add DTB policy for supporting multiple required conf keys   Thirupathaiah Annapureddy
• [PATCH v2 2/3] test: vboot: add tests for multiple required keys   Thirupathaiah Annapureddy
• [PATCH v2 3/3] doc: verified-boot: add required-mode information   Thirupathaiah Annapureddy
• [PATCH] efi_loader: cleanup for tee backed variables   Ilias Apalodimas
• [PATCH v2 16/17] efi_loader: enable UEFI variables at runtime   Ilias Apalodimas
• [PATCH] efi_loader: display RO attribute with TEE-backed variables   Ilias Apalodimas
• [PATCH v2] efi_loader: display RO attribute with TEE-backed variables   Ilias Apalodimas
• [PATCH 1/1] efi_loader: update secure state   Ilias Apalodimas
• [PATCH] efi_loader: Correct value for ARM_SMC_MM_RET_NO_MEMORY   Ilias Apalodimas
• [PATCH v2] efi_loader: Rename and correct values for ARM_SMC_MM_*   Ilias Apalodimas
• [PATCH] efi_loader: Trim output buffer size correctly for tee variables   Ilias Apalodimas
• [PATCH] efi_loader: Check for the native OP-TEE result on mm_communicate calls   Ilias Apalodimas
• [PATCH] efi_loader: Enable run-time variable support for tee based variables   Ilias Apalodimas
• Debian boot failure with UEFI runtime variables enabled   Ilias Apalodimas
• [PATCH v2] efi_loader: Enable run-time variable support for tee based variables   Ilias Apalodimas
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH 0/3] board: amlogic: add Odroid C4 support   Neil Armstrong
• [PATCH 1/3] ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1   Neil Armstrong
• [PATCH 2/3] boards: amlogic: add Odroid C4 support   Neil Armstrong
• [PATCH 3/3] ARM: dts: meson-sm1-odroid-c4: add ethernet PHY reset   Neil Armstrong
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH v3 7/7] arm: meson: change trace level for phy errors managed by uclass   Neil Armstrong
• [PATCH 0/3] board: amlogic: add Odroid C4 support   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20200708   Neil Armstrong
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Neil Armstrong
• [PATCH] serial: meson: handle RX errors   Neil Armstrong
• [PATCH v2 2/8] dm: button: add a driver for button driven by gpio   Neil Armstrong
• [PATCH] configs: odroid-c2: enable HDMI output   Neil Armstrong
• [PATCH] serial: meson: handle RX errors   Neil Armstrong
• [PATCH v2] configs: odroid-c2: update for HDMI output, ADC & USB keyboard   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20200727   Neil Armstrong
• [PATCH 1/1] mvpp2: fix second cp110 initialization   Sven Auhagen
• [RFC PATCH 01/16] patman: Use test_util to show test results   Daniel Axtens
• [RFC PATCH 01/16] patman: Use test_util to show test results   Daniel Axtens
• [RFC PATCH 01/16] patman: Use test_util to show test results   Daniel Axtens
• [PATCH] sunxi: Add support for using UART4 as console on A64   Nazım Gediz Aydındoğmuş
• [PATCH] sunxi: Add support for using UART4 as console on A64   Nazım Gediz Aydındoğmuş
• [RFC PATCH v2] sunxi: Add UART4 console support for A64   Nazım Gediz Aydındoğmuş
• Seemless Boot Splash on iMX-based boards   Stefano Babic
• [PATCH 00/16] spi: dm-conversion (part3)   Stefano Babic
• Using gerrit or github for review?   Stefano Babic
• [GIT PULL] please pull NXP i.MX   Stefano Babic
• [PATCH v3] imx: support for conga-QMX8 board   Stefano Babic
• [PATCH] watchdog: imx: Support set timeout by wdt command   Stefano Babic
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Stefano Babic
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Stefano Babic
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Stefano Babic
• [PATCH] mx6memcal: fix build   Stefano Babic
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200716   Stefano Babic
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Stefano Babic
• [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10   Stefano Babic
• [PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Stefano Babic
• [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers   Stefano Babic
• [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers   Stefano Babic
• [PATCH] board: Add support for iMX8QXP AI_ML board   Stefano Babic
• [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S   David Bauer
• [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S   David Bauer
• [PATCH v4] arm: socfpga: add board support for ic-automation Moritz III   Nico Becker
• [PATCH] rockchip: sdram: fix dram_init_banksize   Alex Bee
• [PATCH 00/22] clk: at91: add sama7g5 support   Claudiu Beznea
• [PATCH 01/22] clk: check hw and hw->dev before dereference it   Claudiu Beznea
• [PATCH 02/22] clk: check pointer returned by dev_get_parent()   Claudiu Beznea
• [PATCH 03/22] dm: core: add support for device re-parenting   Claudiu Beznea
• [PATCH 04/22] clk: bind clk to new parent device   Claudiu Beznea
• [PATCH 05/22] clk: do not disable clock if it is critical   Claudiu Beznea
• [PATCH 06/22] clk: get clock pointer before proceeding   Claudiu Beznea
• [PATCH 07/22] clk: at91: add pre-requisite headers for AT91 clock architecture   Claudiu Beznea
• [PATCH 08/22] clk: at91: pmc: add helpers for clock drivers   Claudiu Beznea
• [PATCH 09/22] clk: at91: move clock code to compat.c   Claudiu Beznea
• [PATCH 10/22] clk: at91: sckc: add driver compatible with ccf   Claudiu Beznea
• [PATCH 11/22] clk: at91: clk-main: add driver compatible with ccf   Claudiu Beznea
• [PATCH 12/22] clk: at91: sam9x60-pll: add driver compatible with ccf   Claudiu Beznea
• [PATCH 13/22] clk: at91: clk-master: add driver compatible with ccf   Claudiu Beznea
• [PATCH 14/22] clk: at91: clk-master: add support for sama7g5   Claudiu Beznea
• [PATCH 15/22] clk: at91: clk-utmi: add driver compatible with ccf   Claudiu Beznea
• [PATCH 16/22] clk: at91: clk-utmi: add support for sama7g5   Claudiu Beznea
• [PATCH 17/22] clk: at91: clk-programmable: add driver compatible with ccf   Claudiu Beznea
• [PATCH 18/22] clk: at91: clk-system: add driver compatible with ccf   Claudiu Beznea
• [PATCH 19/22] clk: at91: clk-peripheral: add driver compatible with ccf   Claudiu Beznea
• [PATCH 20/22] clk: at91: clk-generic: add driver compatible with ccf   Claudiu Beznea
• [PATCH 21/22] clk: at91: pmc: add generic clock ops   Claudiu Beznea
• [PATCH 22/22] clk: at91: sama7g5: add clock support   Claudiu Beznea
• [PATCH v3 0/5] Fixes for running U-boot under QEMU/KVM   Ard Biesheuvel
• [PATCH v3 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH   Ard Biesheuvel
• [PATCH v3 2/5] arm: qemu: enable LPAE on 32-bit   Ard Biesheuvel
• [PATCH v3 3/5] arm: qemu: implement enable_caches()   Ard Biesheuvel
• [PATCH v3 4/5] arm: qemu: disable the EFI workaround for older GRUB   Ard Biesheuvel
• [PATCH v3 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Ard Biesheuvel
• [PATCH 1/2] patman: Make sure sendemail.suppresscc is (un)set correctly   Nicolas Boichat
• [PATCH 2/2] patman: When no tracking branch is provided, tell the user   Nicolas Boichat
• [PATCH v3 04/14] i2c: add nexell driver   Stefan Bosch
• [PATCH v4 00/14] arm: add support for SoC S5P4418   Stefan Bosch
• [PATCH v4 01/14] arm: add mach-nexell (header files)   Stefan Bosch
• [PATCH v4 02/14] arm: add mach-nexell (all files except header files)   Stefan Bosch
• [PATCH v4 03/14] gpio: add nexell driver   Stefan Bosch
• [PATCH v4 04/14] i2c: add nexell driver   Stefan Bosch
• [PATCH v4 05/14] mmc: add nexell driver   Stefan Bosch
• [PATCH v4 06/14] pinctrl: add nexell driver   Stefan Bosch
• [PATCH v4 07/14] pwm: add driver for nexell   Stefan Bosch
• [PATCH v4 08/14] video: add nexell video driver (soc: displaytop)   Stefan Bosch
• [PATCH v4 09/14] video: add nexell video driver (soc: mlc, mipi)   Stefan Bosch
• [PATCH v4 10/14] video: add nexell video driver (soc: lvds, hdmi)   Stefan Bosch
• [PATCH v4 11/14] video: add nexell video driver (soc: dpc, makefile)   Stefan Bosch
• [PATCH v4 12/14] video: add nexell video driver (display/video driver)   Stefan Bosch
• [PATCH v4 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Stefan Bosch
• [PATCH v4 14/14] arm: add (default) config for nanopi2 board   Stefan Bosch
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• Using gerrit or github for review?   Alexey Brodkin
• Using gerrit or github for review?   Alexey Brodkin
• [PATCH v3 08/17] board_f: Introduce board_setup_bdinfo_mem initcall   Alexey Brodkin
• [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo   Alexey Brodkin
• U-Boot Tests for ARM Architecture   Brownlie, Lewis
• [External] Re: U-Boot Tests for ARM Architecture   Brownlie, Lewis
• [PATCH v4 0/9] USB host support for Raspberry Pi 4 board (64-bit)   Matthias Brugger
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Matthias Brugger
• CONFIG_NR_DRAM_BANKS in configs/rpi_4* deleted   Matthias Brugger
• [PATCH] config: Enable USB Keyboard support on RPi4   Matthias Brugger
• [PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Matthias Brugger
• [PATCH v4 6/9] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Matthias Brugger
• [PATCH v4 6/9] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Matthias Brugger
• [PATCH v6 4/4] usb: xhci: Add reset controller support   Matthias Brugger
• [PATCH] xhci: Only build xhci_reset_hw() if CONFIG_DM_USB is enabled   Matthias Brugger
• [PATCH] include/bitfield.h: include byteorder.h   Matthias Brugger
• [GIT PULL] rpi-next for v2020.10   Matthias Brugger
• [GIT PULL] rpi-next for v2020.10   Matthias Brugger
• [PATCH] board/km: update MAINTAINERS email   Holger Brunck
• [PATCH] board: st: move type-c stusb1600 controller code in a driver   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp   Patrice CHOTARD
• [PATCH] arm: stm32mp: protect DBGMCU_IDC access with BSEC   Patrice CHOTARD
• [PATCH] arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: stm32mp1: increase teed partition   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: use the command env info -q in env_check   Patrice CHOTARD
• [PATCH 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrice CHOTARD
• [PATCH 2/2] stm32mp1: use the command env info in env_check   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: configs: activate CMD_ERASEENV   Patrice CHOTARD
• [PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling   Patrice CHOTARD
• [PATCH 1/4] ram: stm32mp1: protect minimum value in get_bufsize   Patrice CHOTARD
• [PATCH 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern   Patrice CHOTARD
• [PATCH 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus   Patrice CHOTARD
• [PATCH 4/4] ram: stm32mp1: add size and addr parameter to test all   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp1: activate WATCHDOG   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 02/11] board: stm32mp1: update the gpio hog support   Patrice CHOTARD
• [PATCH v2 03/11] gpio: stm32: add ops set_dir_flags   Patrice CHOTARD
• [PATCH v2 04/11] gpio: stm32: add ops get_dir_flags   Patrice CHOTARD
• [PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction   Patrice CHOTARD
• [PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration   Patrice CHOTARD
• [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg   Patrice CHOTARD
• [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag   Patrice CHOTARD
• [PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags   Patrice CHOTARD
• [PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration   Patrice CHOTARD
• [PATCH v2 11/11] pinctrl: stm32: add information on pin configuration   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: dh_stm32mp1: update the gpio hog support   Patrice CHOTARD
• [PATCH v2 1/9] arm: stm32mp: spl: add bsec driver in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrice CHOTARD
• [PATCH v2 2/2] stm32mp1: use the command env info in env_check   Patrice CHOTARD
• [PATCH v2 6/9] board: st: stpmic1: add function stpmic1_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 7/9] board: stm32mp1: update vddcore in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 8/9] ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 9/9] board: stm32mp1: move the function board_debug_uart_init in spl.c   Patrice CHOTARD
• [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
• [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
• [PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice CHOTARD
• [PATCH 1/2] ARM: dts: stm32: Move ethernet PHY into SoM DT   Patrice CHOTARD
• [PATCH 2/2] ARM: dts: stm32: Add DHSOM based DRC02 board   Patrice CHOTARD
• [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: update test on misc_read result in board_late_init   Patrice CHOTARD
• [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrice CHOTARD
• [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrice CHOTARD
• [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrice CHOTARD
• [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrice CHOTARD
• [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrice CHOTARD
• [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 1/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 2/3] stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 3/3] configs:stm32mp1: activate env config in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] stm32mp1: use the command env info -q in env_check   Patrice CHOTARD
• [PATCH] [dh stm32mp1] remove env location override   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: update test on misc_read result in board_late_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrice CHOTARD
• [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrice CHOTARD
• [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrice CHOTARD
• [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrice CHOTARD
• [PATCH 1/2] ARM: dts: stm32: Move ethernet PHY into SoM DT   Patrice CHOTARD
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200729   Patrice CHOTARD
• [PATCH 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
• [PATCH 2/4] dt-bindings: arm: SCMI bindings documentation   Etienne Carriere
• [PATCH 3/4] clk: add clock driver for SCMI agents   Etienne Carriere
• [PATCH 4/4] reset: add reset controller driver for SCMI agents   Etienne Carriere
• [PATCH 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
• [PATCH 2/4] dt-bindings: arm: SCMI bindings documentation   Etienne Carriere
• [PATCH 3/4] clk: add clock driver for SCMI agents   Etienne Carriere
• Reproducibility regression with mx6cuboxi   Vagrant Cascadian
• Reproducibility regression with mx6cuboxi   Vagrant Cascadian
• Reproducibility regression with mx6cuboxi   Vagrant Cascadian
• [PATCH v2] fit_image: Use calloc() to fix reproducibility issue   Vagrant Cascadian
• [PATCH v2] cmd: add clone command   John Chau
• [PATCH v3] cmd: add clone command   John Chau
• [PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Pengpeng Chen
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [PATCH v4 2/6] sifive: fu540: Add Booting from SPI   Rick Chen
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Rick Chen
• [PATCH] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Rick Chen
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Rick Chen
• [PATCH v2] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Rick Chen
• [PATCH v2] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Rick Chen
• [PATCH v3] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Rick Chen
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Rick Chen
• [PATCH v5 0/6] riscv: sifive/fu540: SPI boot   Rick Chen
• [PATCH v3 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Rick Chen
• [PATCH v4] riscv: Make SiFive HiFive Unleashed board boot again   Rick Chen
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Rick Chen
• [PATCH 1/6] riscv: Rework riscv timer driver to only support S-mode   Rick Chen
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Rick Chen
• [PATCH v5 0/5] cmd: bind allow to bind driver with driver_data   Patrice Chotard
• [PATCH v5 1/5] cmd: bind: allow to bind driver with driver data   Patrice Chotard
• [PATCH v5 2/5] sandbox: phy: add driver_data for bind test cmd   Patrice Chotard
• [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node   Patrice Chotard
• [PATCH v5 4/5] test/py: Update test_bind   Patrice Chotard
• [PATCH v5 5/5] doc: add bind/unbind command documentation   Patrice Chotard
• [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice Chotard
• [PATCH] configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file   Chubb, Peter (Data61, Kensington NSW)
• [PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling   Jaehoon Chung
• [PATCH 08/12] poweroff: Add poweroff-gpio driver   Jaehoon Chung
• [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Jaehoon Chung
• [PATCH] mmc: msm_sdhci: Use mmc_of_parse for setting host_caps   Jaehoon Chung
• [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Jaehoon Chung
• [PATCH 14/31] power: Tidy up inclusion of regulator_common.h   Jaehoon Chung
• am654_sdhci: mmc fail to send stop cmd   Jaehoon Chung
• [PATCH] ARM: Samsung: Add support for iTop-4412 based on Samsung Exynos4412   Jaehoon Chung
• Using gerrit or github for review?   Corey Clayton
• [PATCH v3 7/8] efi_loader: signature: rework for intermediate   REITHER Robert - Contractor
• [PATCH 0/4] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH 1/4] fs/squashfs: new filesystem   Joao Marcos Costa
• [PATCH 2/4] fs/squashfs: add filesystem commands   Joao Marcos Costa
• [PATCH 3/4] fs/squashfs: add sources for zlib decompression   Joao Marcos Costa
• [PATCH 4/4] fs/squashfs: add support for zlib decompression   Joao Marcos Costa
• [PATCH 1/4] fs/squashfs: new filesystem   Joao Marcos Costa
• [PATCH 0/3] squashfs fixes   Joao Marcos Costa
• [PATCH v2 0/5] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH v2 1/5] fs/squashfs: new filesystem   Joao Marcos Costa
• [PATCH v2 2/5] fs/squashfs: add filesystem commands   Joao Marcos Costa
• [PATCH v2 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v2 4/5] fs/squashfs: add support for zlib decompression   Joao Marcos Costa
• [PATCH v2 5/5] fs/fs.c: add symbolic link case to fs_ls_generic()   Joao Marcos Costa
• [PATCH v3 0/5] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH v3 1/5] fs/squashfs: new filesystem   Joao Marcos Costa
• [PATCH v3 2/5] fs/squashfs: add filesystem commands   Joao Marcos Costa
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v3 4/5] fs/squashfs: add support for zlib decompression   Joao Marcos Costa
• [PATCH v3 5/5] fs/fs.c: add symbolic link case to fs_ls_generic()   Joao Marcos Costa
• [PATCH v3 0/5] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v3 0/5] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v4 0/6] Add support for the SquashFS filesystem   Joao Marcos Costa
• [PATCH v4 1/6] fs/squashfs: new filesystem   Joao Marcos Costa
• [PATCH v4 2/6] fs/squashfs: add filesystem commands   Joao Marcos Costa
• [PATCH v4 3/6] include/u-boot, lib/zlib: add sources for zlib decompression   Joao Marcos Costa
• [PATCH v4 4/6] fs/squashfs: add support for zlib decompression   Joao Marcos Costa
• [PATCH v4 5/6] fs/fs.c: add symbolic link case to fs_ls_generic()   Joao Marcos Costa
• [PATCH v4 6/6] test/py: Add tests for the SquashFS commands   Joao Marcos Costa
• [PATCH v2] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
• [PATCH v2] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
• [PATCH] video: extend stdout video console work-around for 'vga'   Patrick DELAUNAY
• [PATCH v3] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
• [PATCH 3/3] cmd: adtimg: Refactor usage style   Patrick DELAUNAY
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707   Patrick DELAUNAY
• [PATCH 3/3] cmd: adtimg: Refactor usage style   Patrick DELAUNAY
• [PATCH] arm: cmd_stm32prog: Fix the CONFIG_IS_ENABLED() usage   Patrick DELAUNAY
• [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Patrick DELAUNAY
• [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
• [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map   Patrick DELAUNAY
• [PATCH] [dh stm32mp1] remove env location override   Patrick DELAUNAY
• [PATCH 1/2] ARM: dts: stm32: Move ethernet PHY into SoM DT   Patrick DELAUNAY
• [PATCH 2/2] ARM: dts: stm32: Add DHSOM based DRC02 board   Patrick DELAUNAY
• [PATCH] Clean up the Spansion/Cypress/Infineon device ID table   Bacem Daassi
• [PATCH] arm: mach-k3: Clean non-coherent lines out of L3 cache   Andrew F. Davis
• [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrick Delaunay
• [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Patrick Delaunay
• [PATCH v2] board: dh_stm32mp1: update the gpio hog support   Patrick Delaunay
• [PATCH v2 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick Delaunay
• [PATCH v2 2/2] stm32mp1: use the command env info in env_check   Patrick Delaunay
• [PATCH v2] stm32mp1: use the command env info -q in env_check   Patrick Delaunay
• [PATCH] patman: Detect unexpected END   Patrick Delaunay
• [PATCH] Add information for skipped commit options   Patrick Delaunay
• [PATCH v2 1/4] ram: stm32mp1: protect minimum value in get_bufsize   Patrick Delaunay
• [PATCH v2 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern   Patrick Delaunay
• [PATCH v2 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus   Patrick Delaunay
• [PATCH v2 4/4] ram: stm32mp1: add size and addr parameter to test all   Patrick Delaunay
• [PATCH v3 0/7] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
• [PATCH v3 1/7] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
• [PATCH v3 2/7] board: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH v3 3/7] usb: host: ohci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH v3 4/7] usb: host: ehci-hcd: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH v3 5/7] ata: dwc-ahci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH v3 6/7] usb: musb-new: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH v3 7/7] arm: meson: change trace level for phy errors managed by uclass   Patrick Delaunay
• [PATCH] board: update test on misc_read result in board_late_init   Patrick Delaunay
• [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrick Delaunay
• [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrick Delaunay
• [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrick Delaunay
• [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Patrick Delaunay
• [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrick Delaunay
• [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Patrick Delaunay
• [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrick Delaunay
• [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrick Delaunay
• [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrick Delaunay
• [PATCH] arm: k3: use correct weak function name spl_board_prepare_for_linux   Patrick Delaunay
• [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrick Delaunay
• [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrick Delaunay
• [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrick Delaunay
• [PATCH] psci: put psci_method in .data section if EFI_LOADER is not enabled   Patrick Delaunay
• [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrick Delaunay
• [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrick Delaunay
• [PATCH v4 00/14] env: ext4: corrections and add test for env in ext4   Patrick Delaunay
• [PATCH v4 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
• [PATCH v4 02/14] env: ext4: set gd->env_valid   Patrick Delaunay
• [PATCH v4 03/14] env: sf: avoid space in backend name   Patrick Delaunay
• [PATCH v4 04/14] env: correctly handle env_load_prio   Patrick Delaunay
• [PATCH v4 05/14] env: nowhere: add .load ops   Patrick Delaunay
• [PATCH v4 06/14] env: the ops driver load becomes mandatory in struct env_driver   Patrick Delaunay
• [PATCH v4 07/14] cmd: env: add env load command   Patrick Delaunay
• [PATCH v4 08/14] cmd: env: add env select command   Patrick Delaunay
• [PATCH v4 09/14] configs: sandbox: activate env in ext4 support   Patrick Delaunay
• [PATCH v4 10/14] configs: sandbox: activate command env select and env load   Patrick Delaunay
• [PATCH v4 11/14] test: environment in ext4   Patrick Delaunay
• [PATCH v4 12/14] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
• [PATCH v4 13/14] env: ext4: add support of command env erase   Patrick Delaunay
• [PATCH v4 14/14] test: sandbox: add test for erase command   Patrick Delaunay
• [PATCH] board: stm32mp1: use const for struct node_info   Patrick Delaunay
• [PATCH] board: stm32mp1: remove board.c   Patrick Delaunay
• [PATCH 1/2] cmd: clk: cosmetic: correct code alignment in show_clks   Patrick Delaunay
• [PATCH 2/2] cmd: clk: correctly handle depth for clk dump   Patrick Delaunay
• [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check   Patrick Delaunay
• [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected   Patrick Delaunay
• [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power   Patrick Delaunay
• [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init   Patrick Delaunay
• [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf   Patrick Delaunay
• [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix   Patrick Delaunay
• [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init   Patrick Delaunay
• [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions   Patrick Delaunay
• [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup   Patrick Delaunay
• [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef   Patrick Delaunay
• [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef   Patrick Delaunay
• Cover Letter of Patchsets   Wolfgang Denk
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Wolfgang Denk
• Using gerrit or github for review?   Wolfgang Denk
• Using gerrit or github for review?   Wolfgang Denk
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Wolfgang Denk
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Wolfgang Denk
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Wolfgang Denk
• [PATCH] Fix data abort caused by mis-aligning fit data in   Reuben Dowle
• [PATCH] Fix corner case in bad block table handling.   Doyle, Patrick
• [PATCH] bcmgenet: fix DMA buffer management   Etienne Dublé
• [PATCH v2 14/14] common/board_r: Move blkcache_init call earlier in the boot sequence   Angelo Dureghello
• [PATCH 1/1] arm-freescale-mx6sx: Fix imx6sx UART5 wrong iomux register configuration   Fabio Estevam
• [PATCH] doc: multi-dtb-fit: Remove double underscores   Fabio Estevam
• [PATCH 00/16] spi: dm-conversion (part3)   Fabio Estevam
• [PATCH] board: Add support for iMX8QXP AI_ML board   Fabio Estevam
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Fabio Estevam
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Fabio Estevam
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   Fabio Estevam
• [PATCH 1/2] imx8m: ddrphy_utils: Improve coding style   Fabio Estevam
• [PATCH 2/2] imx8m: soc: Remove unneeded space   Fabio Estevam
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200716   Fabio Estevam
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200716   Fabio Estevam
• [PATCH 6/6] mx6cuboxi: enable OF_PLATDATA   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• [PATCH] imx: Add MYiR Tech MYS-6ULX support   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• [PATCH] fit_image: Fix the introduction of variable bytes   Fabio Estevam
• [PATCH v2] imx: Add MYiR Tech MYS-6ULX support   Fabio Estevam
• [PATCH v2] fit_image: Use calloc() to fix reproducibility issue   Fabio Estevam
• Reproducibility regression with mx6cuboxi   Fabio Estevam
• [PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH   Fabio Estevam
• [PATCH v2] configs: pico-imx6: convert ethernet function to DM_ETH   Fabio Estevam
• [PATCH v1 1/3] configs: pico-imx6ul: convert DM_USB   Fabio Estevam
• [PATCH v1 2/3] configs: pico-imx6ul: convert DM_VIDEO   Fabio Estevam
• [PATCH v1 3/3] pico-imx6ul: convert ethernet function to DM_ETH   Fabio Estevam
• [PATCH v1 2/3] configs: pico-imx6ul: convert DM_VIDEO   Fabio Estevam
• [PATCH v1 2/3] configs: pico-imx6ul: convert DM_VIDEO   Fabio Estevam
• [PATCH v2 1/3] configs: pico-imx6ul: convert DM_USB   Fabio Estevam
• [PATCH v2 2/3] configs: pico-imx6ul: convert DM_VIDEO   Fabio Estevam
• [PATCH v2 3/3] pico-imx6ul: convert ethernet function to DM_ETH   Fabio Estevam
• [PATCH 01/17] armv8: Fix SMCC and ARM_PSCI_FW dependencies   Peng Fan
• [PATCH 03/17] board: Introduce xenguest_arm64 board   Peng Fan
• [PATCH 04/17] xen: Add essential and required interface headers   Peng Fan
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Peng Fan
• Question Porting U-Boot to iMX8MN with LPDDR4   Peng Fan
• [PATCH] arm: Add extra boot device (UART) to run Ymodem u-boot.img boot on XEA (imx28)   Peng Fan
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Peng Fan
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Peng Fan
• [GIT PULL] please pull NXP i.MX   Peng Fan
• [PATCH] mmc: Parse new binding for eMMC fixed driver type   Peng Fan
• [GIT PULL] please pull mmc-7-24-2020   Peng Fan
• am654_sdhci: mmc fail to send stop cmd   Peng Fan
• [v2, 01/11] mmc: add a reinit() API   Peng Fan
• [v2, 05/11] mmc: add a hs400_tuning flag   Peng Fan
• [v2, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Peng Fan
• [v2, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode   Peng Fan
• [v2, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Peng Fan
• [PATCH 1/2] imx8m: ddrphy_utils: Improve coding style   Peng Fan
• [PATCH 2/2] imx8m: soc: Remove unneeded space   Peng Fan
• [PATCH 1/4] firmware: add new driver for SCMI firmwares   Peng Fan
• [PATCH 2/4] dt-bindings: arm: SCMI bindings documentation   Peng Fan
• [PATCH 3/4] clk: add clock driver for SCMI agents   Peng Fan
• [PATCH 4/4] reset: add reset controller driver for SCMI agents   Peng Fan
• [v2, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Peng Fan
• QSPI mode on imx6ull evk   Peng Fan
• [PATCH v2 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support   Peng Fan
• [PATCH 2/2] configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigs   Peng Fan
• [PATCH] mmc: zynq: Fix default value for xlnx,mio-bank   Peng Fan
• [PATCH] xilinx: Fix xlnx,mio_bank property   Peng Fan
• [PATCH] mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value   Peng Fan
• [RFC PATCH 01/16] patman: Use test_util to show test results   Stephen Finucane
• [PATCH] Convert CONFIG_ENV_OVERWRITE to Kconfig   Adam Ford
• [PATCH 1/2] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig   Adam Ford
• [PATCH 2/2] Convert CONFIG_SPL_NAND_BASE et al to Kconfig   Adam Ford
• [PATCH] Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to Kconfig   Adam Ford
• [PATCH] Convert CONFIG_BOOTP_DNS2 to Kconfig   Adam Ford
• [PATCH] Convert CONFIG_BOOTP_SEND_HOSTNAME to Kconfig   Adam Ford
• [PATCH] configs: Remove dead CONFIG options   Adam Ford
• [PATCH] Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig   Adam Ford
• Question Porting U-Boot to iMX8MN with LPDDR4   Adam Ford
• [PATCH] imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.   Adam Ford
• [PATCH] arm: imx6q: pcm058: Rework SPI NOR configuration   Niel Fourie
• [PATCH 2/3] msm_serial: Read bit rate register value from DT   Ramon Fried
• [PATCH 3/3] msm_gpio: Add support for Qualcomm IPQ40xx   Ramon Fried
• [PATCH] mmc: msm_sdhci: Use mmc_of_parse for setting host_caps   Ramon Fried
• [PATCH v5] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Ramon Fried
• Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
• Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
• Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
• Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
• [PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Dave Gerlach
• [PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Dave Gerlach
• [PATCH v2 0/9] Introduce UCLASS_SOC   Dave Gerlach
• [PATCH v2 1/9] doc: Add new doc for soc ID driver model   Dave Gerlach
• [PATCH v2 2/9] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Dave Gerlach
• [PATCH v2 3/9] test: Add tests for SOC uclass   Dave Gerlach
• [PATCH v2 4/9] dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs   Dave Gerlach
• [PATCH v2 5/9] arm: dts: k3-am65-wakeup: Introduce chipid node   Dave Gerlach
• [PATCH v2 6/9] arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node   Dave Gerlach
• [PATCH v2 7/9] configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3   Dave Gerlach
• [PATCH v2 8/9] configs: j721e_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3   Dave Gerlach
• [PATCH v2 9/9] arm: mach-k3: Use SOC driver for device identification   Dave Gerlach
• [PATCH v4 04/14] dtoc: add support to scan drivers   Simon Glass
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [RFC PATCH v2 1/3] dm: Driver and uclass changes for tiny-dm   Simon Glass
• [RFC PATCH v2 2/3] dm: Arch-specific changes for tiny-dm   Simon Glass
• [RFC PATCH v2 3/3] dm: Core changes for tiny-dm   Simon Glass
• [PATCH v2 1/1] fs: error handling in do_load()   Simon Glass
• [PATCH v3 06/15] board: ns3: default reset type to L3   Simon Glass
• [PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH v1 20/43] x86: pinctrl: Set up itss in the probe() method   Simon Glass
• [PATCH v4 02/12] pinctrl: Reformat documentation in dm/pinctrl.h   Simon Glass
• [PATCH v4 03/12] test: pinmux: Add test for pin muxing   Simon Glass
• [PATCH v4 04/12] pinctrl: Add support for Kendryte K210 FPIOA   Simon Glass
• [PATCH v4 05/12] gpio: sifive: Use generic reg read function   Simon Glass
• [PATCH v4 07/12] gpio: dw: Add a trailing underscore to generated name   Simon Glass
• [PATCH v4 10/12] test: dm: Test for default led naming   Simon Glass
• [PATCH v4 11/12] riscv: Add pinmux and gpio bindings for Kendryte K210   Simon Glass
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [RESEND PATCH v3 00/26] x86: video: Speed up the framebuffer   Simon Glass
• [RESEND PATCH v3 01/26] x86: fsp: Reinit the FPU after FSP meminit   Simon Glass
• [RESEND PATCH v3 03/26] video: Show an error when a vidconsole function fails   Simon Glass
• [RESEND PATCH v3 04/26] sandbox: video: Allow selection of rotated console   Simon Glass
• [RESEND PATCH v3 05/26] video: Split out expression parts into variables   Simon Glass
• [RESEND PATCH v3 06/26] video: Adjust rotated console to start at right edge   Simon Glass
• [RESEND PATCH v3 07/26] video: Drop unnecessary #ifdef around vid_console_color()   Simon Glass
• [RESEND PATCH v3 08/26] video: Add a comment for struct video_uc_platdata   Simon Glass
• [RESEND PATCH v3 09/26] video: Add support for copying to a hardware framebuffer   Simon Glass
• [RESEND PATCH v3 10/26] video: Set up the copy framebuffer when enabled   Simon Glass
• [RESEND PATCH v3 11/26] video: Clear the copy framebuffer when clearing the screen   Simon Glass
• [RESEND PATCH v3 12/26] video: Add helpers for vidconsole for the copy framebuffer   Simon Glass
• [RESEND PATCH v3 13/26] video: Update normal console to support copy buffer   Simon Glass
• [RESEND PATCH v3 14/26] video: Update truetype console to support copy buffer   Simon Glass
• [RESEND PATCH v3 15/26] video: Update rotated console to support copy buffer   Simon Glass
• [RESEND PATCH v3 16/26] video: Update the copy framebuffer when writing bitmaps   Simon Glass
• [RESEND PATCH v3 17/26] video: Add comments to struct sandbox_sdl_plat   Simon Glass
• [RESEND PATCH v3 18/26] video: sandbox: Add support for the copy framebuffer   Simon Glass
• [RESEND PATCH v3 19/26] video: pci: Set up the copy framebuffer   Simon Glass
• [RESEND PATCH v3 20/26] x86: fsp: video: Allocate a frame buffer when needed   Simon Glass
• [RESEND PATCH v3 21/26] video: Correctly handle multiple framebuffers   Simon Glass
• [RESEND PATCH v3 22/26] x86: video: Support copy framebuffer with probed devices   Simon Glass
• [RESEND PATCH v3 26/26] x86: minnowmax: Drop screen resolution to 1024x768   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH 2/8] test: Add tests for SOC uclass   Simon Glass
• [PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Simon Glass
• [PATCH v9 1/2] led: led_cortina: Add CAxxx LED support   Simon Glass
• [PATCH 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Simon Glass
• [PATCH v3 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Simon Glass
• [PATCH v3 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Simon Glass
• [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Simon Glass
• [PATCH 02/17] Kconfig: Introduce CONFIG_XEN   Simon Glass
• [PATCH 06/17] xen: Port Xen event channel driver from mini-os   Simon Glass
• [PATCH 07/17] serial: serial_xen: Add Xen PV serial driver   Simon Glass
• [PATCH 13/17] xen: pvblock: Enumerate virtual block devices   Simon Glass
• [PATCH 14/17] xen: pvblock: Read XenStore configuration and initialize   Simon Glass
• [PATCH 15/17] xen: pvblock: Implement front-back protocol and do IO   Simon Glass
• [PATCH 16/17] xen: pvblock: Print found devices indices   Simon Glass
• [PATCH 17/17] board: xen: De-initialize before jumping to Linux   Simon Glass
• [PATCH] patman: Detect unexpected END   Simon Glass
• [PATCH] Add information for skipped commit options   Simon Glass
• [PATCH] lib: libfdt: fdt_region: avoid NULL pointer access   Simon Glass
• [PATCH v5 04/14] dtoc: add support to scan drivers   Simon Glass
• [RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Simon Glass
• [PATCH v2 1/8] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*   Simon Glass
• [PATCH v2 2/8] linux/kconfig.h: remove unused helper macros   Simon Glass
• [PATCH v2 3/8] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Simon Glass
• [PATCH v2 4/8] bootstage: Fix 'stacked' typo   Simon Glass
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• [PATCH v2 6/8] coral: Enable the copy framebuffer   Simon Glass
• [PATCH v2 7/8] x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME   Simon Glass
• [PATCH v2 8/8] x86: fsp: Support a warning message when DRAM init is slow   Simon Glass
• [PATCH v5 04/14] dtoc: add support to scan drivers   Simon Glass
• Chainloading U-Boot from Fastboot on Tegra30   Simon Glass
• Chainloading U-Boot from Fastboot on Tegra30   Simon Glass
• [PATCH v4 13/14] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [PATCH v4 11/14] dm: doc: update of-plat with new phandle support   Simon Glass
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Simon Glass
• [PATCH v4 08/14] core: extend struct driver_info to point to device   Simon Glass
• [PATCH v4 09/14] sandbox: Move section u_boot_list to make it RW   Simon Glass
• [PATCH v4 07/14] core: drop const for struct driver_info   Simon Glass
• [PATCH v4 06/14] dm: doc: update of-plat with the support for driver aliases   Simon Glass
• [PATCH v4 05/14] dtoc: add option to disable warnings   Simon Glass
• [PATCH v4 02/14] dtoc: add missing code comments   Simon Glass
• [PATCH v4 3/3] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory()   Simon Glass
• [PATCH v4 1/3] test/dm: fdtdec: Add the missing gd declaration   Simon Glass
• [PATCH v4 2/3] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout()   Simon Glass
• [PATCH 1/1] cmd: fdt: remove CMD_FDT_MAX_DUMP   Simon Glass
• [PATCH v4 2/2] log: use BIT() instead of 1 <<   Simon Glass
• [PATCH v4 1/2] log: don't show function by default   Simon Glass
• [PATCH 4/5] patman: Add tests for the rest of the checkpatch checks   Simon Glass
• [PATCH 2/5] patman: Add a test for the 'possible new uclass' check   Simon Glass
• [PATCH 3/5] patman: Decode output from the '--show-types' option   Simon Glass
• [PATCH 1/5] patman: Rename test.py to test_checkpatch.py   Simon Glass
• [PATCH] dm: core: Correct comment on uclass_id_foreach_dev()   Simon Glass
• [PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required   Simon Glass
• [PATCH 1/1] sandbox: handling out of memory   Simon Glass
• [PATCH 1/1] log: uclass_get_name() depends on CONFIG_SPL_DM   Simon Glass
• [PATCH 1/1] sandbox: make RAM size configurable   Simon Glass
• [PATCH v4 5/6] patman: Avoid importing gitutil in settings   Simon Glass
• [PATCH v4 6/6] patman: Drop import of test_util in test_util   Simon Glass
• [PATCH v4 4/6] patman: Pass in maintainer dirs to avoid and import   Simon Glass
• [PATCH v4 3/6] patman: Use a dict in gitutil to avoid importing series   Simon Glass
• [PATCH v4 2/6] patman: Avoid circular dependency between command and tools   Simon Glass
• [PATCH v4 1/6] patman: Drop unnecessary import in gitutil   Simon Glass
• [PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required   Simon Glass
• [PATCH 1/1] sandbox: handling out of memory   Simon Glass
• [PATCH 1/2] spi: Remove unnecessary #ifdefs in header file   Simon Glass
• [PATCH 2/2] x86: apl: Re-enable loading of SPL   Simon Glass
• [PATCH v3 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v3 01/25] x86: mp_init: Switch to livetree   Simon Glass
• [PATCH v3 02/25] x86: Move MP code into mp_init   Simon Glass
• [PATCH v3 03/25] x86: mp_init: Avoid declarations in header files   Simon Glass
• [PATCH v3 04/25] x86: mp_init: Switch parameter names in start_aps()   Simon Glass
• [PATCH v3 05/25] x86: mp_init: Drop the num_cpus static variable   Simon Glass
• [PATCH v3 06/25] x86: mtrr: Fix 'ensable' typo   Simon Glass
• [PATCH v3 07/25] x86: mp_init: Set up the CPU numbers at the start   Simon Glass
• [PATCH v3 08/25] x86: mp_init: Adjust bsp_init() to return more information   Simon Glass
• [PATCH v3 09/25] x86: cpu: Remove unnecessary #ifdefs   Simon Glass
• [PATCH v3 10/25] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH v3 11/25] global_data: Add a generic global_data flag for SMP state   Simon Glass
• [PATCH v3 12/25] x86: Set the SMP flag when MP init is complete   Simon Glass
• [PATCH v3 13/25] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH v3 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v3 15/25] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH v3 16/25] x86: mtrr: Use MP calls to list the MTRRs   Simon Glass
• [PATCH v3 17/25] x86: Don't enable SMP in SPL   Simon Glass
• [PATCH v3 18/25] x86: coral: Update the memory map   Simon Glass
• [PATCH v3 19/25] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [PATCH v3 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Simon Glass
• [PATCH v3 21/25] x86: mtrr: Update the command to use the new mtrr calls   Simon Glass
• [PATCH v3 22/25] x86: mtrr: Restructure so command execution is in one place   Simon Glass
• [PATCH v3 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Simon Glass
• [PATCH v3 24/25] x86: mp: Add more comments to the module   Simon Glass
• [PATCH v3 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Simon Glass
• [RFC PATCH 00/16] RFC: patman: Collect review tags and comments from Patchwork   Simon Glass
• [RFC PATCH 01/16] patman: Use test_util to show test results   Simon Glass
• [RFC PATCH 02/16] patman: Move main code out to a control module   Simon Glass
• [RFC PATCH 03/16] patman: Add a test that uses gitpython   Simon Glass
• [RFC PATCH 04/16] patman: Allow creating patches for another branch   Simon Glass
• [RFC PATCH 05/16] patman: Allow skipping patches at the end   Simon Glass
• [RFC PATCH 06/16] patman: Convert to ArgumentParser   Simon Glass
• [RFC PATCH 07/16] patman: Allow different commands   Simon Glass
• [RFC PATCH 08/16] patman: Add a 'test' subcommand   Simon Glass
• [RFC PATCH 09/16] patman: Allow disabling 'bright' mode with Print output   Simon Glass
• [RFC PATCH 10/16] patman: Support collecting response tags in Patchstream   Simon Glass
• [RFC PATCH 11/16] patman: Allow linking a series with patchwork   Simon Glass
• [RFC PATCH 12/16] patman: Add a -D option to enable debugging   Simon Glass
• [RFC PATCH 13/16] patchstream: Support parsing of review snippets   Simon Glass
• [RFC PATCH 14/16] patman: Support checking for review tags in patchwork   Simon Glass
• [RFC PATCH 15/16] patman: Support updating a branch with review tags   Simon Glass
• [RFC PATCH 16/16] patman: Support listing comments from patchwork   Simon Glass
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Simon Glass
• [PATCH v2 10/25] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH v2 15/25] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH v2 19/25] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [RFC PATCH 01/16] patman: Use test_util to show test results   Simon Glass
• Chainloading U-Boot from Fastboot on Tegra30   Simon Glass
• [PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Simon Glass
• [PATCH] x86: remove unused setup_pcat_compatibility() stub   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [RFC 2/4] dtoc: add initial support for deleting DTB nodes   Simon Glass
• [RFC 1/4] dtoc: add POC for dtb shrink   Simon Glass
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Simon Glass
• [PATCH v4 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• [PATCH v4 01/35] dm: core: Add an ACPI name for the root node   Simon Glass
• [PATCH v4 02/35] acpi: Add a function to get a device path and scope   Simon Glass
• [PATCH v4 03/35] acpi: Add a way to check device status   Simon Glass
• [PATCH v4 04/35] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• [PATCH v4 05/35] acpi: Support generation of ACPI code   Simon Glass
• [PATCH v4 06/35] acpi: Support generation of interrupt descriptor   Simon Glass
• [PATCH v4 07/35] gpio: Add a method to convert a GPIO to ACPI   Simon Glass
• [PATCH v4 08/35] acpi: Support string output   Simon Glass
• [PATCH v4 09/35] acpi: Support generation of GPIO descriptor   Simon Glass
• [PATCH v4 10/35] acpi: Support generation of a GPIO/irq for a device   Simon Glass
• [PATCH v4 11/35] acpi: Support generation of I2C descriptor   Simon Glass
• [PATCH v4 12/35] acpi: Support generation of SPI descriptor   Simon Glass
• [PATCH v4 13/35] acpigen: Support writing a length   Simon Glass
• [PATCH v4 14/35] acpigen: Support writing a package   Simon Glass
• [PATCH v4 15/35] acpi: Support writing an integer   Simon Glass
• [PATCH v4 16/35] acpi: Support writing a string   Simon Glass
• [PATCH v4 17/35] acpi: Support writing a name   Simon Glass
• [PATCH v4 18/35] acpi: Support writing a UUID   Simon Glass
• [PATCH v4 19/35] acpi: Support writing Device Properties objects via _DSD   Simon Glass
• [PATCH v4 20/35] acpi: Support writing a GPIO   Simon Glass
• [PATCH v4 21/35] acpi: Support copying properties from device tree to ACPI   Simon Glass
• [PATCH v4 22/35] acpi: Add support for various misc ACPI opcodes   Simon Glass
• [PATCH v4 23/35] acpi: Add support for writing a Power Resource   Simon Glass
• [PATCH v4 24/35] acpi: Add support for writing a GPIO power sequence   Simon Glass
• [PATCH v4 25/35] acpi: Add support for a generic power sequence   Simon Glass
• [PATCH v4 26/35] acpi: Add support for SSDT generation   Simon Glass
• [PATCH v4 27/35] x86: acpi: Move MADT down a bit   Simon Glass
• [PATCH v4 28/35] acpi: Record the items added to SSDT   Simon Glass
• [PATCH v4 29/35] acpi: Support ordering SSDT data by device   Simon Glass
• [PATCH v4 30/35] x86: Allow devices to write an SSDT   Simon Glass
• [PATCH v4 31/35] acpi: Add support for DSDT generation   Simon Glass
• [PATCH v4 32/35] x86: Allow devices to write to DSDT   Simon Glass
• [PATCH v4 33/35] pci: Avoid a crash in device_is_on_pci_bus()   Simon Glass
• [PATCH v4 34/35] dm: acpi: Enhance acpi_get_name()   Simon Glass
• [PATCH v4 35/35] acpi: Add an acpi command to list/dump generated ACPI items   Simon Glass
• [PATCH v3 08/35] acpi: Support string output   Simon Glass
• [PATCH v3 09/35] acpi: Support generation of GPIO descriptor   Simon Glass
• [PATCH v3 12/35] acpi: Support generation of SPI descriptor   Simon Glass
• [PATCH v3 31/35] acpi: Add support for DSDT generation   Simon Glass
• [PATCH v3 34/35] dm: acpi: Enhance acpi_get_name()   Simon Glass
• [PATCH v4 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v4 01/25] x86: mp_init: Switch to livetree   Simon Glass
• [PATCH v4 02/25] x86: Move MP code into mp_init   Simon Glass
• [PATCH v4 03/25] x86: mp_init: Avoid declarations in header files   Simon Glass
• [PATCH v4 04/25] x86: mp_init: Switch parameter names in start_aps()   Simon Glass
• [PATCH v4 05/25] x86: mp_init: Drop the num_cpus static variable   Simon Glass
• [PATCH v4 06/25] x86: mtrr: Fix 'ensable' typo   Simon Glass
• [PATCH v4 07/25] x86: mp_init: Set up the CPU numbers at the start   Simon Glass
• [PATCH v4 08/25] x86: mp_init: Adjust bsp_init() to return more information   Simon Glass
• [PATCH v4 09/25] x86: cpu: Remove unnecessary #ifdefs   Simon Glass
• [PATCH v4 10/25] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH v4 11/25] global_data: Add a generic global_data flag for SMP state   Simon Glass
• [PATCH v4 12/25] x86: Set the SMP flag when MP init is complete   Simon Glass
• [PATCH v4 13/25] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH v4 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v4 15/25] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH v4 16/25] x86: mtrr: Use MP calls to list the MTRRs   Simon Glass
• [PATCH v4 17/25] x86: Don't enable SMP in SPL   Simon Glass
• [PATCH v4 18/25] x86: coral: Update the memory map   Simon Glass
• [PATCH v4 19/25] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [PATCH v4 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Simon Glass
• [PATCH v4 21/25] x86: mtrr: Update the command to use the new mtrr calls   Simon Glass
• [PATCH v4 22/25] x86: mtrr: Restructure so command execution is in one place   Simon Glass
• [PATCH v4 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Simon Glass
• [PATCH v4 24/25] x86: mp: Add more comments to the module   Simon Glass
• [PATCH v4 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Simon Glass
• [PATCH v3 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v3 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes   Simon Glass
• [PATCH v1 08/43] acpi: Export functions to write sized values   Simon Glass
• [PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH v2 00/44] x86: Programmatic generation of ACPI tables (Part C)   Simon Glass
• [PATCH v2 01/44] binman: Allow setting the ROM offset   Simon Glass
• [PATCH v2 02/44] binman: Refactor binman_entry_find() to allow other nodes   Simon Glass
• [PATCH v2 03/44] binman: Add way to locate an entry in memory   Simon Glass
• [PATCH v2 04/44] acpi: Allow creating the GNVS to fail   Simon Glass
• [PATCH v2 05/44] dtoc: Support ACPI paths in of-platdata   Simon Glass
• [PATCH v2 06/44] dm: core: Add a way of overriding the ACPI device path   Simon Glass
• [PATCH v2 07/44] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH v2 08/44] acpi: Export functions to write sized values   Simon Glass
• [PATCH v2 09/44] acpi: Support generation of a scope   Simon Glass
• [PATCH v2 10/44] acpi: Support generation of a generic register   Simon Glass
• [PATCH v2 11/44] acpi: mmc: Generate ACPI info for the PCI SD Card   Simon Glass
• [PATCH v2 12/44] x86: Add bindings for NHLT   Simon Glass
• [PATCH v2 13/44] acpi: Support generation of a device   Simon Glass
• [PATCH v2 14/44] acpi: Support writing named values   Simon Glass
• [PATCH v2 15/44] x86: Add support for building up an NHLT structure   Simon Glass
• [PATCH v2 16/44] sound: Add an ACPI driver for Dialog Semicondutor da7219   Simon Glass
• [PATCH v2 17/44] sound: Add an ACPI driver for Maxim MAX98357ac   Simon Glass
• [PATCH v2 18/44] x86: pinctrl: Add a way to get the pinctrl reg address   Simon Glass
• [PATCH v2 19/44] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Simon Glass
• [PATCH v2 20/44] x86: pinctrl: Add multi-ACPI control   Simon Glass
• [PATCH v2 21/44] x86: pinctrl: Set up itss in the probe() method   Simon Glass
• [PATCH v2 22/44] x86: pinctrl: Drop the acpi_path member   Simon Glass
• [PATCH v2 23/44] x86: Add error checking for csrt table generation   Simon Glass
• [PATCH v2 24/44] x86: apl: Use memory-mapped access for VBT   Simon Glass
• [PATCH v2 25/44] x86: gpio: Add support for obtaining ACPI info for a GPIO   Simon Glass
• [PATCH v2 26/44] i2c: designware_i2c: Add a little more debugging   Simon Glass
• [PATCH v2 27/44] i2c: Add log_ret() on error   Simon Glass
• [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation   Simon Glass
• [PATCH v2 29/44] p2sb: Add a method to hide the bus   Simon Glass
• [PATCH v2 30/44] x86: apl: Support set_hide() in p2sb driver   Simon Glass
• [PATCH v2 31/44] x86: apl: Hide the p2sb on exit from U-Boot   Simon Glass
• [PATCH v2 32/44] pmc: Move common registers to the header file   Simon Glass
• [PATCH v2 33/44] x86: irq: Support flags for acpi_gpe   Simon Glass
• [PATCH v2 34/44] x86: apl: Fix save/restore of ITSS priorities   Simon Glass
• [PATCH v2 35/44] x86: Add debugging to table writing   Simon Glass
• [PATCH v2 36/44] x86: apl: Set the correct boot mode in the FSP-M code   Simon Glass
• [PATCH v2 37/44] x86: apl: Adjust FSP-M code to avoid hard-coded address   Simon Glass
• [PATCH v2 38/44] x86: Store the coreboot table address in global_data   Simon Glass
• [PATCH v2 39/44] x86: mp: Allow use of mp_run_on_cpus() without MP   Simon Glass
• [PATCH v2 40/44] x86: Update the comment about booting for FSP2   Simon Glass
• [PATCH v2 41/44] x86: Drop setup_pcat_compatibility()   Simon Glass
• [PATCH v2 42/44] x86: acpi: Correct the version of the MADT   Simon Glass
• [PATCH v2 43/44] x86: Rename board_final_cleanup() to board_final_init()   Simon Glass
• [PATCH v2 44/44] acpi: Enable ACPI table generation by default on x86   Simon Glass
• [PATCH v1 12/43] x86: Add bindings for NHLT   Simon Glass
• [PATCH v1 15/43] sound: Add an ACPI driver for Dialog Semicondutor da7219   Simon Glass
• [PATCH v1 22/43] x86: Add support for building up an NHLT structure   Simon Glass
• [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO   Simon Glass
• [PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation   Simon Glass
• [PATCH v1 32/43] pmc: Move common registers to the header file   Simon Glass
• [PATCH v1 33/43] x86: irq: Support flags for acpi_gpe   Simon Glass
• [PATCH v1 34/43] x86: apl: Fix save/restore of ITSS priorities   Simon Glass
• [PATCH v1 37/43] x86: Store the coreboot table address in global_data   Simon Glass
• [PATCH v1 38/43] x86: mp: Allow use of mp_run_on_cpus() without MP   Simon Glass
• [PATCH v1 40/43] x86: Drop setup_pcat_compatibility()   Simon Glass
• [PATCH 1/2] spi: Remove unnecessary #ifdefs in header file   Simon Glass
• [PATCH v3 06/15] board: ns3: default reset type to L3   Simon Glass
• [PATCH v2 1/2] spi: Remove unnecessary #ifdefs in header file   Simon Glass
• [PATCH v2 2/2] x86: apl: Re-enable loading of SPL   Simon Glass
• test/py GPIO failure in u-boot/master   Simon Glass
• [PATCH 08/12] poweroff: Add poweroff-gpio driver   Simon Glass
• [PATCH] fixdep: fix CONFIG_IS_ENABLED etc. handling   Simon Glass
• [v2] test: Have test_fs work with non-functional guestmount tools   Simon Glass
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• [PATCH 1/2] vboot: add support for multiple required keys   Simon Glass
• [PATCH] serial: Fix SIFIVE debug serial dependency   Simon Glass
• [PATCH] lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()   Simon Glass
• [PATCH 05/10] board_f: mips: Factor out mips-specific bdinfo setup   Simon Glass
• [PATCH 01/10] board_f: Introduce arch_setup_bdinfo initcall   Simon Glass
• [PATCH 02/10] board_f: m68k: Factor out m68k-specific bdinfo setup   Simon Glass
• [PATCH 03/10] board_f: ppc: Factor out ppc-specific bdinfo setup   Simon Glass
• [PATCH 04/10] board_f: sh: Factor out sh-specific bdinfo setup   Simon Glass
• [PATCH 06/10] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Simon Glass
• [PATCH 07/10] drivers: serial: Make serial_initialize return int   Simon Glass
• [PATCH 08/10] common/board_r: Remove initr_serial wrapper   Simon Glass
• [PATCH 09/10] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Simon Glass
• [PATCH 10/10] common/board_r: Move blkcache_init call earlier in the boot sequence   Simon Glass
• [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• Re: [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling【请注意，邮件由sjg at google.com代发】   Simon Glass
• [PATCH v3 00/49] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• [PATCH v3 01/49] dm: core Fix long line in device_bind_common()   Simon Glass
• [PATCH v3 02/49] .gitignore: Ignore Python 3 cache directories   Simon Glass
• [PATCH v3 03/49] binman: Output errors to stderr   Simon Glass
• [PATCH v3 04/49] binman: cbfs: Fix IFWI typo   Simon Glass
• [PATCH v3 05/49] binman: Correct the search patch for pylibfdt   Simon Glass
• [PATCH v3 06/49] binman: Specify the toolpath when running test coverage   Simon Glass
• [PATCH v3 07/49] binman: Set a default toolpath   Simon Glass
• [PATCH v3 08/49] binman: Add support for calling mkimage   Simon Glass
• [PATCH v3 09/49] binman: Fix a few typos in the entry docs   Simon Glass
• [PATCH v3 10/49] binman: Adjust pylibfdt for incremental build   Simon Glass
• [PATCH v3 11/49] binman: Re-enable concurrent tests   Simon Glass
• [PATCH v3 12/49] binman: Use super() instead of specifying parent type   Simon Glass
• [PATCH v3 13/49] binman: Add an etype for external binary blobs   Simon Glass
• [PATCH v3 14/49] binman: Convert existing binary blobs to blob_ext   Simon Glass
• [PATCH v3 15/49] binman: Allow external binaries to be missing   Simon Glass
• [PATCH v3 16/49] patman: Update errors and warnings to use stderr   Simon Glass
• [PATCH v3 17/49] binman: Detect when valid images are not produced   Simon Glass
• [PATCH v3 18/49] binman: Allow missing Intel blobs   Simon Glass
• [PATCH v3 19/49] binman: Allow zero-length entries to overlap   Simon Glass
• [PATCH v3 20/49] mkimage: Allow updating the FIT timestamp   Simon Glass
• [PATCH v3 21/49] dtoc: Allow adding variable-sized data to a dtb   Simon Glass
• [PATCH v3 22/49] binman: Add support for generating a FIT   Simon Glass
• [PATCH v3 23/49] x86: Change how selection of ROMs works   Simon Glass
• [PATCH v3 24/49] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH v3 25/49] Makefile: Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH v3 26/49] rockchip: jerry: Add serial support   Simon Glass
• [PATCH v3 27/49] rockchip: bob: Support SPI-flash booting   Simon Glass
• [PATCH v3 28/49] rockchip: Enable building a SPI ROM image on jerry   Simon Glass
• [PATCH v3 29/49] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH v3 30/49] tegra: Drop the unused non-binman code   Simon Glass
• [PATCH v3 31/49] tegra: Don't enable binman on ARMv8 SoCs   Simon Glass
• [PATCH v3 32/49] Makefile: Rename ALL-y to INPUTS-y   Simon Glass
• [PATCH v3 33/49] powerpc: mpc85xx: Only enable binman when it is needed   Simon Glass
• [PATCH v3 34/49] x86: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v3 35/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM   Simon Glass
• [PATCH v3 36/49] sunxi: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v3 37/49] tegra: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v3 38/49] mediatek: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v3 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later   Simon Glass
• [PATCH v3 40/49] Makefile: Fix a long line in cmd_mkfitimage   Simon Glass
• [PATCH v3 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty   Simon Glass
• [PATCH v3 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v3 43/49] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• [PATCH v3 44/49] rockchip: Convert evb-rk3229 over to use binman   Simon Glass
• [PATCH v3 45/49] rockchip: Drop the fit_spl_optee.sh script   Simon Glass
• [PATCH v3 46/49] x86: Move the fdtmap away from the binary blobs   Simon Glass
• [PATCH v3 47/49] x86: chromebook_link64: Correct the image layout   Simon Glass
• [PATCH v3 48/49] x86: chromebook_panther: Correct the image layout   Simon Glass
• [PATCH v3 49/49] x86: chromebook_samus_tpl: Correct the image layout   Simon Glass
• [PATCH v3 1/4] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• [PATCH v3 2/4] coral: Enable the copy framebuffer   Simon Glass
• [PATCH v3 3/4] x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME   Simon Glass
• [PATCH v3 4/4] x86: fsp: Support a warning message when DRAM init is slow   Simon Glass
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• Please pull u-boot-dm   Simon Glass
• SDwire boards?   Simon Glass
• [PATCH v5 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v3 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH v3 1/4] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• Using gerrit or github for review?   Simon Glass
• Using gerrit or github for review?   Simon Glass
• Using gerrit or github for review?   Simon Glass
• [PATCH v4 13/25] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH v2 17/44] sound: Add an ACPI driver for Maxim MAX98357ac   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH 2/2] patman: When no tracking branch is provided, tell the user   Simon Glass
• [PATCH 1/2] patman: Make sure sendemail.suppresscc is (un)set correctly   Simon Glass
• [PATCH v2] serial: Fix SIFIVE debug serial dependency   Simon Glass
• [PATCH v4 02/15] arm: cpu: armv8: add L3 memory flush support   Simon Glass
• [PATCH v4 06/15] board: ns3: default reset type to L3   Simon Glass
• [PATCH v4 07/15] board: ns3: program GIC LPI tables   Simon Glass
• [PATCH v4 14/15] doc: add README doc for bcmns3 platform   Simon Glass
• [PATCH v3 2/3] board: ns3: add FIT image its file   Simon Glass
• [PATCH v2 01/14] Kconfig: Introduce CONFIG_SYS_HAS_SRAM   Simon Glass
• [PATCH v2 02/14] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig   Simon Glass
• [PATCH v2 03/14] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig   Simon Glass
• [PATCH v2 04/14] Kconfig: Remove CONFIG_SYS_SRAM_START   Simon Glass
• [PATCH v2 06/14] board_f: m68k: Factor out m68k-specific bdinfo setup   Simon Glass
• [PATCH v2 07/14] board_f: ppc: Factor out ppc-specific bdinfo setup   Simon Glass
• [PATCH v2 08/14] board_f: sh: Factor out sh-specific bdinfo setup   Simon Glass
• [PATCH v2 09/14] board_f: mips: Factor out mips-specific bdinfo setup   Simon Glass
• [PATCH v4 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Simon Glass
• [PATCH 1/3] ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt()   Simon Glass
• [PATCH 2/3] Revert "lib: fdt: Split fdtdec_setup_memory_banksize()"   Simon Glass
• [PATCH 3/3] Revert "lib: fdt: Split fdtdec_setup_mem_size_base()"   Simon Glass
• [PATCH v2 1/3] lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()   Simon Glass
• [PATCH v2 2/3] lib: fdt: Convert fdtdes_setup_mem..() to livetree API   Simon Glass
• [PATCH 1/7] dm: button: add an uclass for button   Simon Glass
• [PATCH 2/7] dm: button: add a driver for button driven by gpio   Simon Glass
• [PATCH 3/7] cmd: button: add a new 'button' command   Simon Glass
• [PATCH 5/7] sandbox64: enable button   Simon Glass
• [PATCH 4/7] sandbox: dtsi: add buttons   Simon Glass
• [PATCH 6/7] sandbox: enable button   Simon Glass
• [PATCH 7/7] test/py: add tests for the button commands   Simon Glass
• Using gerrit or github for review?   Simon Glass
• [PATCH] serial: Fix SIFIVE debug serial dependency   Simon Glass
• [PATCH v3 29/49] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH] fdt_support: add static to fdt_node_set_part_info()   Simon Glass
• [PATCH 1/2] fdt_support: call mtdparts_init() after finding MTD node to fix up   Simon Glass
• [PATCH 2/2] fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()   Simon Glass
• [PATCH v2 06/14] board_f: m68k: Factor out m68k-specific bdinfo setup   Simon Glass
• [PATCH 1/1] cmd: fix lsblk command   Simon Glass
• [PATCH v3 29/49] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH v2 1/9] doc: Add new doc for soc ID driver model   Simon Glass
• [PATCH v3 00/10] x86: Programmatic generation of ACPI tables (Part C)   Simon Glass
• [PATCH v3 01/10] x86: apl: Fix save/restore of ITSS priorities   Simon Glass
• [PATCH v3 02/10] x86: Add debugging to table writing   Simon Glass
• [PATCH v3 03/10] x86: apl: Set the correct boot mode in the FSP-M code   Simon Glass
• [PATCH v3 04/10] x86: apl: Adjust FSP-M code to avoid hard-coded address   Simon Glass
• [PATCH v3 05/10] x86: Store the coreboot table address in global_data   Simon Glass
• [PATCH v3 06/10] x86: Update the comment about booting for FSP2   Simon Glass
• [PATCH v3 07/10] x86: Drop setup_pcat_compatibility()   Simon Glass
• [PATCH v3 08/10] x86: acpi: Correct the version of the MADT   Simon Glass
• [PATCH v3 09/10] x86: Rename board_final_cleanup() to board_final_init()   Simon Glass
• [PATCH v3 10/10] acpi: Enable ACPI table generation by default on x86   Simon Glass
• [PATCH v4 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v6 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v6 01/25] x86: mp_init: Switch to livetree   Simon Glass
• [PATCH v6 02/25] x86: Move MP code into mp_init   Simon Glass
• [PATCH v6 03/25] x86: mp_init: Avoid declarations in header files   Simon Glass
• [PATCH v6 04/25] x86: mp_init: Switch parameter names in start_aps()   Simon Glass
• [PATCH v6 05/25] x86: mp_init: Drop the num_cpus static variable   Simon Glass
• [PATCH v6 06/25] x86: mtrr: Fix 'ensable' typo   Simon Glass
• [PATCH v6 07/25] x86: mp_init: Set up the CPU numbers at the start   Simon Glass
• [PATCH v6 08/25] x86: mp_init: Adjust bsp_init() to return more information   Simon Glass
• [PATCH v6 09/25] x86: cpu: Remove unnecessary #ifdefs   Simon Glass
• [PATCH v6 10/25] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH v6 11/25] global_data: Add a generic global_data flag for SMP state   Simon Glass
• [PATCH v6 12/25] x86: Set the SMP flag when MP init is complete   Simon Glass
• [PATCH v6 13/25] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH v6 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v6 15/25] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH v6 16/25] x86: mtrr: Use MP calls to list the MTRRs   Simon Glass
• [PATCH v6 17/25] x86: Don't enable SMP in SPL   Simon Glass
• [PATCH v6 18/25] x86: coral: Update the memory map   Simon Glass
• [PATCH v6 19/25] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [PATCH v6 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Simon Glass
• [PATCH v6 21/25] x86: mtrr: Update the command to use the new mtrr calls   Simon Glass
• [PATCH v6 22/25] x86: mtrr: Restructure so command execution is in one place   Simon Glass
• [PATCH v6 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Simon Glass
• [PATCH v6 24/25] x86: mp: Add more comments to the module   Simon Glass
• [PATCH v6 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Simon Glass
• [PATCH] dm: core: Don't show an ACPI warning if there is no ordering   Simon Glass
• [PATCH 0/6] stdio: Clean up stdio.c   Simon Glass
• [PATCH 1/6] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig   Simon Glass
• [PATCH 2/6] stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV   Simon Glass
• [PATCH 3/6] stdio: Drop #ifdefs in the header file   Simon Glass
• [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Simon Glass
• [PATCH 5/6] stdio: Drop brackets around &devs.list   Simon Glass
• [PATCH 6/6] stdio: Tidy up the coding style   Simon Glass
• [PATCH] buildman: Allow using older versions of genboardscfg.py   Simon Glass
• [PATCH 00/31] dm: Avoid including dm.h in header files   Simon Glass
• [PATCH 01/31] spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL   Simon Glass
• [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code   Simon Glass
• [PATCH 03/31] wdt: Drop dm.h header file   Simon Glass
• [PATCH 04/31] mtd: spi-mem: Drop dm.h header file   Simon Glass
• [PATCH 05/31] mtd: spi: Drop SPI_XFER_MMAP*   Simon Glass
• [PATCH 06/31] dm: core: Drop dm.h header file from dm-demo.h   Simon Glass
• [PATCH 07/31] dm: core: Drop header files from dm/test.h   Simon Glass
• [PATCH 08/31] fs: fs-loader: Drop dm.h header file   Simon Glass
• [PATCH 09/31] net: Drop dm.h header file from phy.h   Simon Glass
• [PATCH 10/31] sf: Drop dm.h header file from spi_flash.h   Simon Glass
• [PATCH 11/31] thermal: Drop dm.h header file   Simon Glass
• [PATCH 12/31] w1: Drop dm.h header file   Simon Glass
• [PATCH 13/31] efi: Tidy up header includes   Simon Glass
• [PATCH 14/31] power: Tidy up inclusion of regulator_common.h   Simon Glass
• [PATCH 15/31] mmc: Drop duplicate dm.h inclusion   Simon Glass
• [PATCH 16/31] spi: Drop duplicate dm.h inclusion   Simon Glass
• [PATCH 17/31] ti: am654: Drop duplicate dm.h inclusion   Simon Glass
• [PATCH 18/31] liebherr: Drop duplicate dm.h inclusion   Simon Glass
• [PATCH 19/31] pci: Drop dm.h inclusion from header file   Simon Glass
• [PATCH 20/31] mediatek: Drop dm.h header file   Simon Glass
• [PATCH 21/31] mscc: Drop dm.h header file   Simon Glass
• [PATCH 22/31] adc: Drop dm.h header file   Simon Glass
• [PATCH 23/31] nand: Drop dm.h header file   Simon Glass
• [PATCH 24/31] ufs: Drop dm.h header file   Simon Glass
• [PATCH 25/31] usb: Drop dm.h header file   Simon Glass
• [PATCH 26/31] clk: Drop dm.h header file in clk-provider.h   Simon Glass
• [PATCH 27/31] net: Drop dm.h header file in eth_phy.h   Simon Glass
• [PATCH 28/31] net: Drop duplicate include of dm.h in pcnet.c   Simon Glass
• [PATCH 29/31] dm: core: Guard against including dm.h in header files   Simon Glass
• [PATCH 30/31] patman: Fix up the test comments   Simon Glass
• [PATCH 31/31] checkpatch: Don't allow common.h and dm.h in headers   Simon Glass
• [PATCH] buildman: Correct the testOutputDir() unit test   Simon Glass
• dtoc code-coverage tests   Simon Glass
• [PATCH] buildman: Show the build rate at the end   Simon Glass
• [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• [PATCH v4 01/27] x86: Change how selection of ROMs works   Simon Glass
• [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH v4 03/27] Makefile: Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH v4 04/27] rockchip: jerry: Add serial support   Simon Glass
• [PATCH v4 05/27] rockchip: bob: Support SPI-flash booting   Simon Glass
• [PATCH v4 06/27] rockchip: Enable building a SPI ROM image on jerry   Simon Glass
• [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH v4 08/27] tegra: Drop the unused non-binman code   Simon Glass
• [PATCH v4 09/27] tegra: Don't enable binman on ARMv8 SoCs   Simon Glass
• [PATCH v4 10/27] Makefile: Rename ALL-y to INPUTS-y   Simon Glass
• [PATCH v4 11/27] powerpc: mpc85xx: Only enable binman when it is needed   Simon Glass
• [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 13/27] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM   Simon Glass
• [PATCH v4 14/27] sunxi: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 15/27] tegra: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 16/27] mediatek: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 17/27] Makefile: Move CONFIG_TOOLS_DEBUG check to later   Simon Glass
• [PATCH v4 18/27] Makefile: Fix a long line in cmd_mkfitimage   Simon Glass
• [PATCH v4 19/27] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty   Simon Glass
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v4 21/27] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• [PATCH v4 22/27] rockchip: Convert evb-rk3229 over to use binman   Simon Glass
• [PATCH v4 23/27] rockchip: Drop the fit_spl_optee.sh script   Simon Glass
• [PATCH v4 24/27] x86: Move the fdtmap away from the binary blobs   Simon Glass
• [PATCH v4 25/27] x86: chromebook_link64: Correct the image layout   Simon Glass
• [PATCH v4 26/27] x86: chromebook_panther: Correct the image layout   Simon Glass
• [PATCH v4 27/27] x86: chromebook_samus_tpl: Correct the image layout   Simon Glass
• [PATCH v3 22/49] binman: Add support for generating a FIT   Simon Glass
• [PATCH v3 21/49] dtoc: Allow adding variable-sized data to a dtb   Simon Glass
• [PATCH v3 20/49] mkimage: Allow updating the FIT timestamp   Simon Glass
• [PATCH v3 19/49] binman: Allow zero-length entries to overlap   Simon Glass
• [PATCH v3 18/49] binman: Allow missing Intel blobs   Simon Glass
• [PATCH v3 17/49] binman: Detect when valid images are not produced   Simon Glass
• [PATCH v3 16/49] patman: Update errors and warnings to use stderr   Simon Glass
• [PATCH v3 15/49] binman: Allow external binaries to be missing   Simon Glass
• [PATCH v3 14/49] binman: Convert existing binary blobs to blob_ext   Simon Glass
• [PATCH v3 13/49] binman: Add an etype for external binary blobs   Simon Glass
• [PATCH v3 12/49] binman: Use super() instead of specifying parent type   Simon Glass
• [PATCH v3 11/49] binman: Re-enable concurrent tests   Simon Glass
• [PATCH v3 10/49] binman: Adjust pylibfdt for incremental build   Simon Glass
• [PATCH v3 09/49] binman: Fix a few typos in the entry docs   Simon Glass
• [PATCH v3 08/49] binman: Add support for calling mkimage   Simon Glass
• [PATCH v3 07/49] binman: Set a default toolpath   Simon Glass
• [PATCH v3 06/49] binman: Specify the toolpath when running test coverage   Simon Glass
• [PATCH v3 05/49] binman: Correct the search patch for pylibfdt   Simon Glass
• [PATCH v3 04/49] binman: cbfs: Fix IFWI typo   Simon Glass
• [PATCH v3 03/49] binman: Output errors to stderr   Simon Glass
• [PATCH v3 02/49] .gitignore: Ignore Python 3 cache directories   Simon Glass
• [PATCH v3 01/49] dm: core Fix long line in device_bind_common()   Simon Glass
• [RFC PATCH 10/16] patman: Support collecting response tags in Patchstream   Simon Glass
• [RFC PATCH 09/16] patman: Allow disabling 'bright' mode with Print output   Simon Glass
• [RFC PATCH 08/16] patman: Add a 'test' subcommand   Simon Glass
• [RFC PATCH 07/16] patman: Allow different commands   Simon Glass
• [RFC PATCH 06/16] patman: Convert to ArgumentParser   Simon Glass
• [RFC PATCH 05/16] patman: Allow skipping patches at the end   Simon Glass
• [RFC PATCH 04/16] patman: Allow creating patches for another branch   Simon Glass
• [RFC PATCH 03/16] patman: Add a test that uses gitpython   Simon Glass
• [RFC PATCH 02/16] patman: Move main code out to a control module   Simon Glass
• [RFC PATCH 01/16] patman: Use test_util to show test results   Simon Glass
• [PATCH v2 8/8] test: dm: add a test for class button   Simon Glass
• [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH v3 08/17] board_f: Introduce board_setup_bdinfo_mem initcall   Simon Glass
• [PATCH v2 8/8] test: dm: add a test for class button   Simon Glass
• [PATCH v3 05/17] cmd: bdinfo: Move sram info prints to generic code   Simon Glass
• [PATCH v3 06/17] board_f: Introduce setup_bdinfo initcall   Simon Glass
• [PATCH v3 09/17] board_f: Move sram bdinfo assignments to generic code   Simon Glass
• [PATCH v3 12/17] board_f: Remove setup_board_part1   Simon Glass
• [PATCH v3 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup   Simon Glass
• [PATCH v3 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Simon Glass
• rk3399-gru-kevin: issues on bringup   Simon Glass
• [PATCH] dm: Fix build error when OF_CONTROL is not set   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• [PATCH] binman: Don't change the descriptor in tests   Simon Glass
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Simon Glass
• [PATCH v2 1/3] dtoc: look for compatible string aliases in driver list   Simon Glass
• [PATCH v2 2/3] drivers: avoid using aliases on drivers when OF_PLATDATA is enabled   Simon Glass
• [PATCH v2 3/3] dtoc: remove compatible string aliases support   Simon Glass
• [PATCH v2 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry   Simon Glass
• [PATCH v2 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support   Simon Glass
• [PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Simon Glass
• [PATCH v2 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   Simon Glass
• [PATCH v2 5/6] drivers: rename more drivers to match compatible string   Simon Glass
• [PATCH v2 6/6] mx6cuboxi: enable OF_PLATDATA   Simon Glass
• [PATCH 2/2] fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()   Simon Glass
• [PATCH 1/1] test/dm: check if devices exist   Simon Glass
• [PATCH] sandbox, test: change hog gpio   Simon Glass
• [PATCH 2/4] dt-bindings: arm: SCMI bindings documentation   Simon Glass
• [PATCH 3/4] clk: add clock driver for SCMI agents   Simon Glass
• [PATCH 4/4] reset: add reset controller driver for SCMI agents   Simon Glass
• [PATCH 1/4] firmware: add new driver for SCMI firmwares   Simon Glass
• [PATCH v2 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Simon Glass
• [PATCH 1/1] efi_loader: returning form UEFI FIT images   Simon Glass
• [PATCH v2 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Simon Glass
• [PATCH v3 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Simon Glass
• [PATCH v3 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Simon Glass
• [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code   Simon Glass
• [PATCH 1/6] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig   Simon Glass
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Simon Glass
• [PATCH 1/2] x86: apl: fsp_bindings: Add support for u64 parameters   Simon Glass
• [PATCH 2/2] arch: x86: apl: Update FSP parameters   Simon Glass
• [PATCH] binman: Don't change the descriptor in tests   Simon Glass
• [PATCH] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH] Add an assembly guard around linux/bitops.h   Simon Glass
• Please pull u-boot-dm (take 2)   Simon Glass
• [PATCH v1 00/54] dm: Add programatic generation of ACPI tables (part D)   Simon Glass
• [PATCH v1 01/54] x86: acpi: Add cros_ec tables   Simon Glass
• [PATCH v1 02/54] x86: acpi: Add base asl files for common x86 devices   Simon Glass
• [PATCH v1 03/54] x86: acpi: apl: Add asl files for Apollo Lake   Simon Glass
• [PATCH v1 04/54] x86: acpi: Add DPTF asl files   Simon Glass
• [PATCH v1 05/54] x86: apl: Correct PCIE_ECAM_BASE   Simon Glass
• [PATCH v1 06/54] x86: Add a config for the systemagent PCIEX regions size   Simon Glass
• [PATCH v1 07/54] x86: Add a common global NVS structure   Simon Glass
• [PATCH v1 08/54] x86: acpi: Support external GNVS tables   Simon Glass
• [PATCH v1 09/54] x86: acpi: Expand the GNVS   Simon Glass
• [PATCH v1 10/54] x86: coral: Add ACPI tables for coral   Simon Glass
• [PATCH v1 11/54] acpi: Add support for writing a _PRW   Simon Glass
• [PATCH v1 12/54] acpi: Add support for conditions and return values   Simon Glass
• [PATCH v1 13/54] acpi: Support generating a multi-function _DSM for devices   Simon Glass
• [PATCH v1 14/54] i2c: Add a generic driver to generate ACPI info   Simon Glass
• [PATCH v1 15/54] x86: Add wake sources for the acpi_gpe driver   Simon Glass
• [PATCH v1 16/54] x86: apl: Support writing the IntelGraphicsMem table   Simon Glass
• [PATCH v1 17/54] x86: acpi: Add a common routine to write WiFi info   Simon Glass
• [PATCH v1 18/54] x86: Add some definitions for SMM   Simon Glass
• [PATCH v1 19/54] x86: apl: Add power-management definitions   Simon Glass
• [PATCH v1 20/54] x86: apl: Update iomap for ACPI   Simon Glass
• [PATCH v1 21/54] x86: Add a few common Intel CPU functions   Simon Glass
• [PATCH v1 22/54] x86: acpi: Support generation of the HPET table   Simon Glass
• [PATCH v1 23/54] x86: acpi: Support generation of the DBG2 table   Simon Glass
• [PATCH v1 24/54] acpi: Add support for generating processor tables   Simon Glass
• [PATCH v1 25/54] x86: acpi: Add PCT and PTC tables   Simon Glass
• [PATCH v1 26/54] acpi: Add more support for generating processor tables   Simon Glass
• [PATCH v1 27/54] x86: acpi: Add common Intel ACPI tables   Simon Glass
• [PATCH v1 28/54] x86: Support Atom SoCs using SWSMISCI rather than the SWSCI   Simon Glass
• [PATCH v1 29/54] x86: acpi: Add support for additional Intel tables   Simon Glass
• [PATCH v1 30/54] x86: apl: Allow reading hostbridge base addresses   Simon Glass
• [PATCH v1 31/54] p2sb: Add some definitions used for ACPI   Simon Glass
• [PATCH v1 32/54] x86: apl: Generate required ACPI tables   Simon Glass
• [PATCH v1 33/54] x86: apl: Add support for hostbridge ACPI generation   Simon Glass
• [PATCH v1 34/54] x86: apl: Generate CPU tables   Simon Glass
• [PATCH v1 35/54] x86: apl: Generate ACPI table for LPC   Simon Glass
• [PATCH v1 36/54] x86: apl: Drop unnecessary code in PMC driver   Simon Glass
• [PATCH v1 37/54] tpm: cr50: Add ACPI support   Simon Glass
• [PATCH v1 38/54] x86: fsp: Update the FSP API with the end-firmware method   Simon Glass
• [PATCH v1 39/54] x86: cpu: Report address width from cpu_get_info()   Simon Glass
• [PATCH v1 40/54] x86: Sort the MTRR table   Simon Glass
• [PATCH v1 41/54] x86: Notify the FSP of the 'end firmware' event   Simon Glass
• [PATCH v1 42/54] x86: Correct the assembly guard in e820.h   Simon Glass
• [PATCH v1 43/54] x86: Add a header guard to asm/acpi_table.h   Simon Glass
• [PATCH v1 44/54] x86: Correct handling of MADT table CPUs   Simon Glass
• [PATCH v1 45/54] acpi: tpm: Add a TPM2 table   Simon Glass
• [PATCH v1 46/54] acpi: tpm: Add a TPM1 table   Simon Glass
• [PATCH v1 47/54] x86: acpi: Set the log category for x86 table generation   Simon Glass
• [PATCH v1 48/54] x86: coral: Add audio descriptor files   Simon Glass
• [PATCH v1 49/54] x86: apl: Check low-level init in FSP-S pre-init   Simon Glass
• [PATCH v1 50/54] x86: fsp: Add more debugging for silicon init   Simon Glass
• [PATCH v1 51/54] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()   Simon Glass
• [PATCH v1 52/54] acpi: Use defines for field lengths   Simon Glass
• [PATCH v1 53/54] x86: Add a way to add to the e820 memory table   Simon Glass
• [PATCH v1 54/54] x86: coral: Update config and device tree for ACPI   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH 1/1] dm: fix ofnode_read_addr/size_cells()   Simon Glass
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Simon Glass
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Simon Glass
• [PATCH] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH] dtoc: add coverage test for unicode error   Simon Glass
• [PATCH 1/3] mkimage: fit: only process one cipher node   Simon Glass
• Finish off common.h reduction   Simon Glass
• Improvements to FIT ciphering   Simon Glass
• [PATCH v3 8/8] test: dm: add a test for class button   Simon Glass
• [PATCH 1/1] dm: remove superfluous comment for union ofnode_union   Simon Glass
• [PATCH v3 7/8] test/py: add tests for the button commands   Simon Glass
• [PATCH v3 6/8] sandbox: enable button   Simon Glass
• [PATCH v3 5/8] sandbox64: enable button   Simon Glass
• [PATCH v3 4/8] sandbox: dtsi: add buttons   Simon Glass
• [PATCH v3 3/8] cmd: button: add a new 'button' command   Simon Glass
• [PATCH v3 2/8] dm: button: add a driver for button driven by gpio   Simon Glass
• [PATCH v3 1/8] dm: button: add an uclass for button   Simon Glass
• [PATCH] sandbox, test: change hog gpio   Simon Glass
• [PATCH] cmd: host: return value of do_host_bind()   Simon Glass
• [PATCH v2] dm: Fix build error when OF_CONTROL is not set   Simon Glass
• [PATCH v2 3/3] dtoc: remove compatible string aliases support   Simon Glass
• [PATCH v2 2/3] drivers: avoid using aliases on drivers when OF_PLATDATA is enabled   Simon Glass
• [PATCH v2 1/3] dtoc: look for compatible string aliases in driver list   Simon Glass
• [PATCH] find dtb in android boot image with header version 2 during bootm   Simon Glass
• [PATCH v4 27/27] x86: chromebook_samus_tpl: Correct the image layout   Simon Glass
• [PATCH v4 26/27] x86: chromebook_panther: Correct the image layout   Simon Glass
• [PATCH v4 25/27] x86: chromebook_link64: Correct the image layout   Simon Glass
• [PATCH v4 24/27] x86: Move the fdtmap away from the binary blobs   Simon Glass
• [PATCH v4 23/27] rockchip: Drop the fit_spl_optee.sh script   Simon Glass
• [PATCH v4 22/27] rockchip: Convert evb-rk3229 over to use binman   Simon Glass
• [PATCH v4 21/27] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v4 19/27] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty   Simon Glass
• [PATCH v4 18/27] Makefile: Fix a long line in cmd_mkfitimage   Simon Glass
• [PATCH v4 17/27] Makefile: Move CONFIG_TOOLS_DEBUG check to later   Simon Glass
• [PATCH v4 16/27] mediatek: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 15/27] tegra: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 13/27] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM   Simon Glass
• [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v4 11/27] powerpc: mpc85xx: Only enable binman when it is needed   Simon Glass
• [PATCH v4 10/27] Makefile: Rename ALL-y to INPUTS-y   Simon Glass
• [PATCH v4 09/27] tegra: Don't enable binman on ARMv8 SoCs   Simon Glass
• [PATCH v4 08/27] tegra: Drop the unused non-binman code   Simon Glass
• [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH v4 06/27] rockchip: Enable building a SPI ROM image on jerry   Simon Glass
• [PATCH v4 05/27] rockchip: bob: Support SPI-flash booting   Simon Glass
• [PATCH v4 04/27] rockchip: jerry: Add serial support   Simon Glass
• [PATCH v4 03/27] Makefile: Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH v3 8/8] test: dm: add a test for class button   Simon Glass
• [PATCH v4 01/27] x86: Change how selection of ROMs works   Simon Glass
• [PATCH] buildman: Show the build rate at the end   Simon Glass
• [PATCH] buildman: Correct the testOutputDir() unit test   Simon Glass
• [PATCH 1/1] dm: remove superfluous comment for union ofnode_union   Simon Glass
• [PATCH] sandbox: enable FIT cipher support in defconfig   Simon Glass
• [PATCH] buildman: Allow using older versions of genboardscfg.py   Simon Glass
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Simon Glass
• [PATCH v2 1/3] vboot: add DTB policy for supporting multiple required conf keys   Simon Glass
• [PATCH] sandbox: enable FIT cipher support in defconfig   Simon Glass
• [PATCH v2 2/3] test: vboot: add tests for multiple required keys   Simon Glass
• [PATCH v2 3/3] doc: verified-boot: add required-mode information   Simon Glass
• [PATCH v2 01/18] Add MIT License   Simon Glass
• [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Simon Glass
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Simon Glass
• [PATCH v3 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Simon Glass
• rk3399-gru-kevin: issues on bringup   Simon Glass
• [PATCH] gpio: Add support for gpio-line-names reading   Simon Glass
• [PATCH v3] i2c: eeprom: Use reg property instead of offset and size   Simon Glass
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Simon Glass
• [PATCH v2] dm: Fix build error when OF_CONTROL is not set   Simon Glass
• [PATCH] Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabled   Simon Glass
• [PATCH] pinctrl: aspeed: Fix Kconfig entry indentation   Simon Glass
• [PATCH v4 1/1] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH] cmd: host: return value of do_host_bind()   Simon Glass
• [PATCH v1 01/24] fdtdec: Add API to read pci bus-range property   Simon Glass
• [PATCH v1 02/24] pci: pci-uclass: Remove #ifdef CONFIG_NR_DRAM_BANKS as its always set   Simon Glass
• [PATCH v1 03/24] pci: pci-uclass: Dynamically allocate the PCI regions   Simon Glass
• [PATCH v1 04/24] pci: pci-uclass: Fix incorrect argument in map_sysmem   Simon Glass
• [PATCH v1 05/24] pci: pci-uclass: Make DT subnode parse optional   Simon Glass
• [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
• [PATCH v1 07/24] pci: pci-uclass: Add support for Enhanced Allocation in Bridges   Simon Glass
• [PATCH v1 08/24] pci: pci-uclass: Add support for Single-Root I/O Virtualization   Simon Glass
• [PATCH v1 11/24] pci: pci-uclass: Check validity of ofnode   Simon Glass
• [PATCH v1 09/24] pci: pci-uclass: Add VF BAR map support for Enhanced Allocation   Simon Glass
• [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Simon Glass
• [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2   Simon Glass
• [PATCH v1 17/24] mmc: Remove static qualifier on mmc_power_init   Simon Glass
• [PATCH v1 13/24] arm: octeontx: Add headers for OcteonTX   Simon Glass
• [PATCH v1 22/24] watchdog: Add reset support for OcteonTX / TX2   Simon Glass
• [PATCH v1 14/24] arm: octeontx2: Add headers for OcteonTX2   Simon Glass
• [PATCH v2 0/5] cmd: Fix 'md' and add a memory-search command   Simon Glass
• [PATCH v2 1/5] test: Add a way to check part of a console line or skip it   Simon Glass
• [PATCH v2 2/5] console: Always define the console-recording functions   Simon Glass
• [PATCH v2 3/5] dm: Rename DM test flags to make them more generic   Simon Glass
• [PATCH v2 4/5] test: Add a flag for tests that need console recording   Simon Glass
• [PATCH v2 5/5] cmd: Update the memory-search command   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Simon Glass
• Using gerrit or github for review?   Simon Glass
• [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Simon Glass
• Please pull u-boot-dm   Simon Glass
• Finish off common.h reduction   Simon Glass
• rk3399-gru-kevin: issues on bringup   Simon Glass
• [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Simon Glass
• PowerPC progress   Simon Glass
• [PATCH v1 13/24] arm: octeontx: Add headers for OcteonTX   Simon Glass
• [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2   Simon Glass
• [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
• [PATCH 11/17] xen: Port Xen grant table driver from mini-os   Julien Grall
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Julien Grall
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Julien Grall
• [PATCH v2 00/18] Add new board: Xen guest for ARM64   Julien Grall
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Anatolij Gustschin
• [PULL] u-boot-sh/net   Joe Hershberger
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Samuel Holland
• [PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Z.q. Hou
• [PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Z.q. Hou
• [PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Zhiqiang Hou
• [PATCHv4 01/16] net: fsl_mdio: Change to use virtual address   Zhiqiang Hou
• [PATCHv4 02/16] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [PATCHv4 03/16] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Zhiqiang Hou
• [PATCHv4 04/16] net: tsec: Add fixed-link PHY support   Zhiqiang Hou
• [PATCHv4 05/16] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCHv4 06/16] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv4 07/16] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCHv4 08/16] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCHv4 09/16] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv4 10/16] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv4 11/16] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv4 12/16] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv4 13/16] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCHv4 14/16] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv4 15/16] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv4 16/16] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv2 00/10] pci: layerscape: Split EP mode code into a   Zhiqiang Hou
• [PATCHv2 01/10] pci: layerscape: Split the EP and RC driver   Zhiqiang Hou
• [PATCHv2 02/10] pci_ep: Add the init function   Zhiqiang Hou
• [PATCHv2 03/10] armv8: dts: ls1046a: Add the PCIe EP node   Zhiqiang Hou
• [PATCHv2 04/10] PCI_EP: layerscape: Add the multiple function support   Zhiqiang Hou
• [PATCHv2 05/10] pci_ep: layerscape: Add the workaround for errata A-009460   Zhiqiang Hou
• [PATCHv2 06/10] pci_ep: layerscape: Add Support for ls2085a and ls2080a EP mode   Zhiqiang Hou
• [PATCHv2 07/10] pci_ep: layerscape: Add the SRIOV VFs of PF support   Zhiqiang Hou
• [PATCHv2 08/10] pci: layerscaple: Modify the ls_pcie_dump_atu function   Zhiqiang Hou
• [PATCHv2 09/10] pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2   Zhiqiang Hou
• [PATCHv2 10/10] pci: layerscape: Add specific config entry for RC and EP mode driver   Zhiqiang Hou
• [PATCHv5 00/18] powerpc: convert p1010, p1020 and p2020 RDB boards to DM_ETH   Zhiqiang Hou
• [PATCHv5 01/18] phy: make phy_connect_fixed work with a null mdio bus   Zhiqiang Hou
• [PATCHv5 02/18] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Zhiqiang Hou
• [PATCHv5 03/18] net: fsl_mdio: Change to use virtual address   Zhiqiang Hou
• [PATCHv5 04/18] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [PATCHv5 05/18] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Zhiqiang Hou
• [PATCHv5 06/18] net: tsec: Add fixed-link PHY support   Zhiqiang Hou
• [PATCHv5 07/18] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCHv5 08/18] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv5 09/18] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCHv5 10/18] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCHv5 11/18] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv5 12/18] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv5 13/18] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv5 14/18] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv5 15/18] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCHv5 16/18] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv5 17/18] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv5 18/18] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH] arm: dts: imx7: Fix error in coresight TPIU graph connection   Ilko Iliev
• [PATCH v2] imx: Add support for Ronetix's i.MX7-CM board.   Ilko Iliev
• pull request of u-boot-fsl-qoriq for v2020.10   Priyanka Jain
• [PATCH v1 1/1] mkimage: Fix error message if write less data then expected   Mylene Josserand
• [PATCH v1 1/1] mkimage: Fix error message if write less data then expected   Mylene Josserand
• [PATCH v2] mkimage: Fix error message if write less data then expected   Mylene Josserand
• [PATCH v2] mkimage: Fix error message if write less data then expected   Mylène Josserand
• [PATCH] xhci: Only build xhci_reset_hw() if CONFIG_DM_USB is enabled   Nicolas Saenz Julienne
• [PATCH] include/bitfield.h: include byteorder.h   Nicolas Saenz Julienne
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Kadam
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Kadam
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Kadam
• [PATCH v3 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Sagar Kadam
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Sagar Kadam
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sagar Kadam
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Sagar Kadam
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Sagar Kadam
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH v5 0/5] add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH v3 0/5] add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v3 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Shrikant Kadam
• [PATCH v3 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Shrikant Kadam
• [PATCH v3 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH v3 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v3 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Sagar Shrikant Kadam
• [PATCH v4 0/5] add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v4 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Shrikant Kadam
• [PATCH v4 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Shrikant Kadam
• [PATCH v4 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH v4 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH v4 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v4 5/5] configs: reset: fu540: enable dm reset framework for SiFive   Sagar Shrikant Kadam
• [PATCH v5 0/5] add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v5 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Shrikant Kadam
• [PATCH v5 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Shrikant Kadam
• [PATCH v5 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH v5 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v5 5/5] configs: reset: fu540: enable dm reset framework for SiFive   Sagar Shrikant Kadam
• [PATCH] mtd: mtdpart: use uint64_t instead of int for cur_off   Martin Kaistra
• [PATCH] ls1028a: fix EFI boot   Mian Yousaf Kaukab
• [PATCH] ls1028a: fix EFI boot   Mian Yousaf Kaukab
• [PATCH v2] ls1028a: use default scan_dev_for_boot   Mian Yousaf Kaukab
• [PATCH 00/11] Add STM32 FMC2 EBI controller driver   Christophe Kerello
• [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow   Christophe Kerello
• [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments   Christophe Kerello
• [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts   Christophe Kerello
• [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant   Christophe Kerello
• [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros   Christophe Kerello
• [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32   Christophe Kerello
• [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver   Christophe Kerello
• [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node   Christophe Kerello
• [PATCH 09/11] board: stm32mp1: update fdt fixup partitions table   Christophe Kerello
• [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI   Christophe Kerello
• [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c   Christophe Kerello
• [PATCH] arm: dts: lx2160a: Increase configuration window size   Wasim Khan
• [PATCH 00/12] Add label to pcie nodes   Wasim Khan
• [PATCH 01/12] pci: layerscape: Print pcie controller number starting from 1   Wasim Khan
• [PATCH 02/12] pci: ls_pcie_g4: Print pcie controller number starting from 1   Wasim Khan
• [PATCH 03/12] arm: dts: lx2160a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 04/12] arm: dts: ls1046a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 05/12] arm: dts: ls2080a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 06/12] arm: dts: ls1088a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 07/12] arm: dts: ls1012a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 08/12] arm: dts: ls1043a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 09/12] arm: dts: ls1028a: add label to pcie nodes in dts   Wasim Khan
• [PATCH 10/12] pci: layerscape: Add size check for config resource   Wasim Khan
• [PATCH 11/12] pci: ls_pcie_g4: Add size check for config resource   Wasim Khan
• [PATCH 12/12] pci: layerscape: indentation correction   Wasim Khan
• Differences in loading device-tree with u-boot/ without u-boot   Clemens Kilgus
• [PATCH v2] arm: k3: Consolidate and silence k3_fit_atf.sh call   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 08/15] board: ns3: program GIC LPI tables   Rayagonda Kokatanur
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v1 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v1 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Rayagonda Kokatanur
• [PATCH v1 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Rayagonda Kokatanur
• [PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v3 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v4 00/15] add initial support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v4 01/15] board: ns3: add support for Broadcom Northstar 3   Rayagonda Kokatanur
• [PATCH v4 02/15] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCH v4 03/15] configs: ns3: enable clock subsystem   Rayagonda Kokatanur
• [PATCH v4 04/15] dt-bindings: memory: ns3: add memory definitions   Rayagonda Kokatanur
• [PATCH v4 05/15] board: ns3: add api to save boot parameters passed from BL31   Rayagonda Kokatanur
• [PATCH v4 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v4 07/15] board: ns3: program GIC LPI tables   Rayagonda Kokatanur
• [PATCH v4 08/15] configs: ns3: enable GIC_V3 ITS   Rayagonda Kokatanur
• [PATCH v4 09/15] dt-bindings: memory: ns3: add ddr memory definition   Rayagonda Kokatanur
• [PATCH v4 10/15] board: ns3: define ddr memory layout   Rayagonda Kokatanur
• [PATCH v4 11/15] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v4 12/15] include/configs: ns3: add env variables for Linux boot   Rayagonda Kokatanur
• [PATCH v4 13/15] include/configs: ns3: add support for flashing images   Rayagonda Kokatanur
• [PATCH v4 14/15] doc: add README doc for bcmns3 platform   Rayagonda Kokatanur
• [PATCH v4 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Rayagonda Kokatanur
• [PATCH v4 0/7] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v4 1/7] configs: ns3: enable pinctrl driver   Rayagonda Kokatanur
• [PATCH v4 2/7] dt-bindings: pinctrl: add ns3 pads definition   Rayagonda Kokatanur
• [PATCH v4 3/7] configs: ns3: enable BCM IPROC mmc driver   Rayagonda Kokatanur
• [PATCH v4 4/7] configs: ns3: enable mmc commands   Rayagonda Kokatanur
• [PATCH v4 5/7] configs: ns3: enable gpt commands   Rayagonda Kokatanur
• [PATCH v4 6/7] configs: ns3: enable EXT4 and FAT fs support   Rayagonda Kokatanur
• [PATCH v4 7/7] configs: ns3: enable sp805 watchdog driver   Rayagonda Kokatanur
• [PATCH v3 0/3] add FIT image support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v3 1/3] configs: ns3: enable FIT config   Rayagonda Kokatanur
• [PATCH v3 2/3] board: ns3: add FIT image its file   Rayagonda Kokatanur
• [PATCH v3 3/3] board: ns3: add development keys used in FIT   Rayagonda Kokatanur
• [PATCH v4 0/2] add optee support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v4 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v4 2/2] configs: ns3: enable tee and optee driver   Rayagonda Kokatanur
• [PATCH v4 14/15] doc: add README doc for bcmns3 platform   Rayagonda Kokatanur
• [PATCH v5 00/15] add initial support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v5 01/15] board: ns3: add support for Broadcom Northstar 3   Rayagonda Kokatanur
• [PATCH v5 02/15] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCH v5 03/15] configs: ns3: enable clock subsystem   Rayagonda Kokatanur
• [PATCH v5 04/15] dt-bindings: memory: ns3: add memory definitions   Rayagonda Kokatanur
• [PATCH v5 05/15] board: ns3: add api to save boot parameters passed from BL31   Rayagonda Kokatanur
• [PATCH v5 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v5 07/15] board: ns3: program GIC LPI tables   Rayagonda Kokatanur
• [PATCH v5 08/15] configs: ns3: enable GIC_V3 ITS   Rayagonda Kokatanur
• [PATCH v5 09/15] dt-bindings: memory: ns3: add ddr memory definition   Rayagonda Kokatanur
• [PATCH v5 10/15] board: ns3: define ddr memory layout   Rayagonda Kokatanur
• [PATCH v5 11/15] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v5 12/15] include/configs: ns3: add env variables for Linux boot   Rayagonda Kokatanur
• [PATCH v5 13/15] include/configs: ns3: add support for flashing images   Rayagonda Kokatanur
• [PATCH v5 14/15] doc: add README doc for bcmns3 platform   Rayagonda Kokatanur
• [PATCH v5 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Rayagonda Kokatanur
• [PATCH v5 0/7] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v5 1/7] configs: ns3: enable pinctrl driver   Rayagonda Kokatanur
• [PATCH v5 2/7] dt-bindings: pinctrl: add ns3 pads definition   Rayagonda Kokatanur
• [PATCH v5 3/7] configs: ns3: enable BCM IPROC mmc driver   Rayagonda Kokatanur
• [PATCH v5 4/7] configs: ns3: enable mmc commands   Rayagonda Kokatanur
• [PATCH v5 5/7] configs: ns3: enable gpt commands   Rayagonda Kokatanur
• [PATCH v5 6/7] configs: ns3: enable EXT4 and FAT fs support   Rayagonda Kokatanur
• [PATCH v5 7/7] configs: ns3: enable sp805 watchdog driver   Rayagonda Kokatanur
• [PATCH v4 0/3] add FIT image support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v4 1/3] configs: ns3: enable FIT config   Rayagonda Kokatanur
• [PATCH v4 2/3] board: ns3: add FIT image its file   Rayagonda Kokatanur
• [PATCH v4 3/3] board: ns3: add development keys used in FIT   Rayagonda Kokatanur
• [PATCH v5 0/2] add optee support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v5 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v5 2/2] configs: ns3: enable tee and optee driver   Rayagonda Kokatanur
• [PATCH v1 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v2 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v2 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Rayagonda Kokatanur
• [PATCH v2 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Rayagonda Kokatanur
• [PATCH v2 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v3 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v3 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Rayagonda Kokatanur
• [PATCH v3 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Rayagonda Kokatanur
• [PATCH v2 0/2] add broadcom spi driver   Rayagonda Kokatanur
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH v4 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH v4 0/2] use dt and UCLASS_IRQ/SYSCON to get gic details   Rayagonda Kokatanur
• [PATCH v4 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Rayagonda Kokatanur
• [PATCH v4 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Rayagonda Kokatanur
• [PATCH v3 1/1] phy: add support for stingray PAXB PHY controller   Rayagonda Kokatanur
• [PATCH 0/5] Add support for a series of MikroTik CRS3xx switches   Luka Kovacic
• [PATCH 1/5] arm: mvebu: Add CRS305-1G-4S Bit board   Luka Kovacic
• [PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board   Luka Kovacic
• [PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board   Luka Kovacic
• [PATCH 4/5] arm: mvebu: crs3xx-98dx3236: Add a maintainer   Luka Kovacic
• [PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout   Luka Kovacic
• [PATCH v5 0/3] Add support for booting into userspace fastboot   Roman Kovalivskyi
• [PATCH v5 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason   Roman Kovalivskyi
• [PATCH v5 2/3] fastboot: Add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH v5 3/3] fastboot: Add default fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [PATCH 1/4] lmb/bdinfo: dump lmb info via bdinfo   Tero Kristo
• [PATCHv2] lmb/bdinfo: dump lmb info via bdinfo   Tero Kristo
• PINE64 Rock64 - How to get SPI driver working   Johannes Krottmayer
• [PATCH] rockchip: rk3328: Add SPI support   Johannes Krottmayer
• [PATCH] rockchip: rock64-rk3328: Add SPI Flash support   Johannes Krottmayer
• U-boot Designware SPI driver issue   Johannes Krottmayer
• [PATCH 0/3] rockchip: rk3328: Add SPI support   Johannes Krottmayer
• [PATCH 1/3] drivers: clk: rockchip: clk_rk3328: Add SPI support   Johannes Krottmayer
• [PATCH 2/3] drivers: spi: rk_spi: Add support for RK3328   Johannes Krottmayer
• [PATCH 3/3] ARM: dts: rk3328: Add SPI support   Johannes Krottmayer
• [PATCH 0/2] PINE64 Rock64 board: Add SPI Flash support   Johannes Krottmayer
• [PATCH 1/2] ARM: dts: rk3328-rock64: Add SPI Flash support   Johannes Krottmayer
• [PATCH 2/2] configs: rock64-rk3328_defconfig: Add SPI Flash support   Johannes Krottmayer
• [PATCH] rockchip: rk3328: Add SPI support   Johannes Krottmayer
• [PATCH 2/2] mtd: make spinand driver usable without CONFIG_DM   Mikhail Kshevetskiy
• u-boot failed, Please help to solve this error   Gaurav Kumar
• [PATCH 1/5] i2c: mxc: move i2c_early_init_f to common function   Biwen Li
• [PATCH 2/5] freescale: ls1046aqds: enable secure system counter   Biwen Li
• [PATCH 3/5] freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2C   Biwen Li
• [PATCH 4/5] freescale: ls1043aqds: enable secure system counter   Biwen Li
• [PATCH 5/5] freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2C   Biwen Li
• [1/5] i2c: mxc: move i2c_early_init_f to common function   Biwen Li
• [2/5] freescale: ls1046aqds: enable secure system counter   Biwen Li
• [3/5] freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2C   Biwen Li
• [4/5] freescale: ls1043aqds: enable secure system counter   Biwen Li
• [5/5] freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2C   Biwen Li
• [PATCH] rtc: pcf2127: fix uninitialized variable msg   Biwen Li
• [EXT] Re: [PATCH] rtc: pcf2127: fix uninitialized variable msg   Biwen Li
• [v5 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li
• [v5 2/3] arm64: lx2160a: dts: Add watchdog node   Biwen Li
• [v5 3/3] configs: lx2160a: Enable Watchdog support   Biwen Li
• [EXT] [PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Ye Li
• Cover Letter of Patchsets   Leo Liang
• Cover Letter of Patchsets   Leo Liang
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Leo Liang
• [PATCH 4/4] ram: sifive: Avoid using hardcoded ram base and size   Leo Liang
• [PATCH] riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc reg   Leo Liang
• [PATCH] riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc reg   Leo Liang
• [PATCH v2 2/2] ram: sifive: Avoid using hardcoded ram base and size   Leo Liang
• [PATCH v4] riscv: Make SiFive HiFive Unleashed board boot again   Leo Liang
• [PATCH v2] serial: Fix SIFIVE debug serial dependency   Leo Liang
• [PATCH 2/2] configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigs   Leo Liang
• Debian boot failure with UEFI runtime variables enabled   Grant Likely
• Debian boot failure with UEFI runtime variables enabled   Grant Likely
• Debian boot failure with UEFI runtime variables enabled   Grant Likely
• [PATCH 00/16] spi: dm-conversion (part3)   Magnus Lilja
• [PATCH 16/16] arm: Remove mx31pdk_defconfig board   Magnus Lilja
• [PATCH] mmc: msm_sdhci: Use mmc_of_parse for setting host_caps   Anibal Limon
• AM335X Bootp of u-boot-spl.bin followed by tftp of u-boot.img. Is it possible?   Richard Lourette
• AM335X Bootp of u-boot-spl.bin followed by tftp of u-boot.img. Is it possible?   Richard Lourette
• [PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Walter Lozano
• [PATCH v5 04/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v4 04/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v5 04/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v1 1/1] mkimage: Fix error message if write less data then expected   Walter Lozano
• [RFC 2/4] dtoc: add initial support for deleting DTB nodes   Walter Lozano
• [RFC 1/4] dtoc: add POC for dtb shrink   Walter Lozano
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• [RFC 1/4] dtoc: add POC for dtb shrink   Walter Lozano
• [RFC 1/4] dtoc: add POC for dtb shrink   Walter Lozano
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH 0/2] dtoc: improve compatible string aliases support   Walter Lozano
• [PATCH 1/2] dtoc: look for compatible string aliases in driver list   Walter Lozano
• [PATCH 2/2] dtoc: remove compatible string aliases support   Walter Lozano
• dtoc code-coverage tests   Walter Lozano
• [PATCH] dtoc: add coverage test for unicode error   Walter Lozano
• [PATCH 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [PATCH 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry   Walter Lozano
• [PATCH 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support   Walter Lozano
• [PATCH 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Walter Lozano
• [PATCH 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   Walter Lozano
• [PATCH 5/6] drivers: rename more drivers to match compatible string   Walter Lozano
• [PATCH 6/6] mx6cuboxi: enable OF_PLATDATA   Walter Lozano
• [PATCH v2 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [PATCH v2 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry   Walter Lozano
• [PATCH v2 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support   Walter Lozano
• [PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Walter Lozano
• [PATCH v2 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   Walter Lozano
• [PATCH v2 5/6] drivers: rename more drivers to match compatible string   Walter Lozano
• [PATCH v2 6/6] mx6cuboxi: enable OF_PLATDATA   Walter Lozano
• [PATCH 6/6] mx6cuboxi: enable OF_PLATDATA   Walter Lozano
• [PATCH v2 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [PATCH v2 0/3] dtoc: improve compatible string aliases support   Walter Lozano
• [PATCH v2 1/3] dtoc: look for compatible string aliases in driver list   Walter Lozano
• [PATCH v2 2/3] drivers: avoid using aliases on drivers when OF_PLATDATA is enabled   Walter Lozano
• [PATCH v2 3/3] dtoc: remove compatible string aliases support   Walter Lozano
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH] dtoc: add coverage test for unicode error   Walter Lozano
• [PATCH v2] dtoc: add coverage test for unicode error   Walter Lozano
• [PATCH v3 0/6] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [PATCH v3 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry   Walter Lozano
• [PATCH v3 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support   Walter Lozano
• [PATCH v3 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Walter Lozano
• [PATCH v3 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   Walter Lozano
• [PATCH v3 5/6] drivers: rename more drivers to match compatible string   Walter Lozano
• [PATCH v3 6/6] mx6cuboxi: enable OF_PLATDATA   Walter Lozano
• [PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support   Walter Lozano
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• [PATCH 0/2] drivers: use of_match_ptr to avoid references when OF_PLATDATA is used   Walter Lozano
• [PATCH 1/2] core: improve of_match_ptr with OF_PLATDATA   Walter Lozano
• [PATCH 2/2] drivers: use of_match_ptr to avoid references when OF_PLATDATA is used   Walter Lozano
• [PATCH 0/4] Move eSDHC adapter card code to board files   Y.b. Lu
• [PATCH 0/4] Move eSDHC adapter card code to board files   Y.b. Lu
• [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Y.b. Lu
• [v2, 01/11] mmc: add a reinit() API   Y.b. Lu
• [v2, 05/11] mmc: add a hs400_tuning flag   Y.b. Lu
• [v2, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Y.b. Lu
• [v2, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode   Y.b. Lu
• [v2, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Y.b. Lu
• [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Yangbo Lu
• [PATCH 1/9] mmc: add a reinit() API   Yangbo Lu
• [PATCH 2/9] mmc: fsl_esdhc: add a reinit() callback   Yangbo Lu
• [PATCH 3/9] mmc: fsl_esdhc: support tuning for eMMC HS200   Yangbo Lu
• [PATCH 4/9] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init   Yangbo Lu
• [PATCH 5/9] mmc: add a hs400_tuning flag   Yangbo Lu
• [PATCH 6/9] mmc: add a mmc_hs400_prepare_ddr() interface   Yangbo Lu
• [PATCH 7/9] mmc: fsl_esdhc: support eMMC HS400 mode   Yangbo Lu
• [PATCH 8/9] arm: dts: lx2160ardb: support eMMC HS400 mode   Yangbo Lu
• [PATCH 9/9] configs: lx2160ardb: enable eMMC HS400 mode support   Yangbo Lu
• [v2, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Yangbo Lu
• [v2, 01/11] mmc: add a reinit() API   Yangbo Lu
• [v2, 02/11] mmc: fsl_esdhc: add a reinit() callback   Yangbo Lu
• [v2, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200   Yangbo Lu
• [v2, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init   Yangbo Lu
• [v2, 05/11] mmc: add a hs400_tuning flag   Yangbo Lu
• [v2, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Yangbo Lu
• [v2, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode   Yangbo Lu
• [v2, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock   Yangbo Lu
• [v2, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue   Yangbo Lu
• [v2, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Yangbo Lu
• [v2, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support   Yangbo Lu
• [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Yangbo Lu
• [v3, 01/11] mmc: add a reinit() API   Yangbo Lu
• [v3, 02/11] mmc: fsl_esdhc: add a reinit() callback   Yangbo Lu
• [v3, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200   Yangbo Lu
• [v3, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init   Yangbo Lu
• [v3, 05/11] mmc: add a hs400_tuning flag   Yangbo Lu
• [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Yangbo Lu
• [v3, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode   Yangbo Lu
• [v3, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock   Yangbo Lu
• [v3, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue   Yangbo Lu
• [v3, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Yangbo Lu
• [v3, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support   Yangbo Lu
• [PATCH 00/17] Add new board: Xen guest for ARM64   Anastasiia Lukianenko
• [PATCH 01/17] armv8: Fix SMCC and ARM_PSCI_FW dependencies   Anastasiia Lukianenko
• [PATCH 02/17] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
• [PATCH 03/17] board: Introduce xenguest_arm64 board   Anastasiia Lukianenko
• [PATCH 04/17] xen: Add essential and required interface headers   Anastasiia Lukianenko
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Anastasiia Lukianenko
• [PATCH 06/17] xen: Port Xen event channel driver from mini-os   Anastasiia Lukianenko
• [PATCH 07/17] serial: serial_xen: Add Xen PV serial driver   Anastasiia Lukianenko
• [PATCH 08/17] linux/compat.h: Add wait_event_timeout macro   Anastasiia Lukianenko
• [PATCH 09/17] lib: sscanf: add sscanf implementation   Anastasiia Lukianenko
• [PATCH 10/17] xen: Port Xen bus driver from mini-os   Anastasiia Lukianenko
• [PATCH 11/17] xen: Port Xen grant table driver from mini-os   Anastasiia Lukianenko
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Anastasiia Lukianenko
• [PATCH 13/17] xen: pvblock: Enumerate virtual block devices   Anastasiia Lukianenko
• [PATCH 14/17] xen: pvblock: Read XenStore configuration and initialize   Anastasiia Lukianenko
• [PATCH 15/17] xen: pvblock: Implement front-back protocol and do IO   Anastasiia Lukianenko
• [PATCH 16/17] xen: pvblock: Print found devices indices   Anastasiia Lukianenko
• [PATCH 17/17] board: xen: De-initialize before jumping to Linux   Anastasiia Lukianenko
• [PATCH 00/17] Add new board: Xen guest for ARM64   Anastasiia Lukianenko
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Anastasiia Lukianenko
• [PATCH 06/17] xen: Port Xen event channel driver from mini-os   Anastasiia Lukianenko
• [PATCH 02/17] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
• [PATCH 04/17] xen: Add essential and required interface headers   Anastasiia Lukianenko
• [PATCH 07/17] serial: serial_xen: Add Xen PV serial driver   Anastasiia Lukianenko
• [PATCH 08/17] linux/compat.h: Add wait_event_timeout macro   Anastasiia Lukianenko
• [PATCH 11/17] xen: Port Xen grant table driver from mini-os   Anastasiia Lukianenko
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Anastasiia Lukianenko
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Anastasiia Lukianenko
• [PATCH 14/17] xen: pvblock: Read XenStore configuration and initialize   Anastasiia Lukianenko
• [PATCH 15/17] xen: pvblock: Implement front-back protocol and do IO   Anastasiia Lukianenko
• [PATCH 17/17] board: xen: De-initialize before jumping to Linux   Anastasiia Lukianenko
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Anastasiia Lukianenko
• [PATCH 05/17] xen: Port Xen hypervizor related code from mini-os   Anastasiia Lukianenko
• [PATCH v2 00/18] Add new board: Xen guest for ARM64   Anastasiia Lukianenko
• [PATCH v2 01/18] Add MIT License   Anastasiia Lukianenko
• [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
• [PATCH v2 03/18] xen: Add essential and required interface headers   Anastasiia Lukianenko
• [PATCH v2 04/18] board: Introduce xenguest_arm64 board   Anastasiia Lukianenko
• [PATCH v2 05/18] xen: Port Xen hypervizor related code from mini-os   Anastasiia Lukianenko
• [PATCH v2 06/18] xen: Port Xen event channel driver from mini-os   Anastasiia Lukianenko
• [PATCH v2 07/18] serial: serial_xen: Add Xen PV serial driver   Anastasiia Lukianenko
• [PATCH v2 08/18] linux/compat.h: Add wait_event_timeout macro   Anastasiia Lukianenko
• [PATCH v2 09/18] lib: sscanf: add sscanf implementation   Anastasiia Lukianenko
• [PATCH v2 10/18] xen: Port Xen bus driver from mini-os   Anastasiia Lukianenko
• [PATCH v2 11/18] xen: Port Xen grant table driver from mini-os   Anastasiia Lukianenko
• [PATCH v2 12/18] xen: pvblock: Add initial support for para-virtualized block driver   Anastasiia Lukianenko
• [PATCH v2 13/18] xen: pvblock: Enumerate virtual block devices   Anastasiia Lukianenko
• [PATCH v2 14/18] xen: pvblock: Read XenStore configuration and initialize   Anastasiia Lukianenko
• [PATCH v2 15/18] xen: pvblock: Implement front-back protocol and do IO   Anastasiia Lukianenko
• [PATCH v2 16/18] xen: pvblock: Print found devices indices   Anastasiia Lukianenko
• [PATCH v2 17/18] board: xen: De-initialize before jumping to Linux   Anastasiia Lukianenko
• [PATCH v2 18/18] doc: xen: Add Xen guest ARM64 board documentation   Anastasiia Lukianenko
• [PATCH v2 01/18] Add MIT License   Anastasiia Lukianenko
• [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
• [maemo-leste] [PATCH] mmc: omap_hsmmc: Set 3.3V for IO voltage on all places   Pavel Machek
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Suniel Mahesh
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Suniel Mahesh
• [PATCH] arm: Add extra boot device (UART) to run Ymodem u-boot.img boot on XEA (imx28)   Lukasz Majewski
• [RFC] dfu: remove UPDATE_TFTP   Lukasz Majewski
• [RFC] dfu: remove UPDATE_TFTP   Lukasz Majewski
• [PATCH for v2020.10 1/1] cmd: drop fitupd command   Lukasz Majewski
• [PATCH v4 2/6] drivers: net: add a DSA sandbox driver   Claudiu Manoil
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Marek
• rockchip RK3399 emmc booting   Belisko Marek
• [RESEND,V2,0/2] Enable mt7531 switch support for MT7629   MarkLee
• [RESEND, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   MarkLee
• [RESEND, V2, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629   MarkLee
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Robert Marko
• [PATCH 2/3] msm_serial: Read bit rate register value from DT   Robert Marko
• [PATCH 3/3] msm_gpio: Add support for Qualcomm IPQ40xx   Robert Marko
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Robert Marko
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Robert Marko
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Robert Marko
• [PATCH v2 0/2] x86: p2sb: P2SB fixes   Bin Meng
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Bin Meng
• [PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Bin Meng
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Bin Meng
• [U-Boot] Pull request: u-boot-riscv/master   Bin Meng
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Bin Meng
• [RESEND PATCH v3 00/26] x86: video: Speed up the framebuffer   Bin Meng
• [PATCH v2 4/8] bootstage: Fix 'stacked' typo   Bin Meng
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH v2 6/8] coral: Enable the copy framebuffer   Bin Meng
• [PATCH v2 7/8] x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME   Bin Meng
• [PATCH v2 1/8] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*   Bin Meng
• [PATCH v2 2/8] linux/kconfig.h: remove unused helper macros   Bin Meng
• [PATCH v2 3/8] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Bin Meng
• [PATCH v2 4/8] bootstage: Fix 'stacked' typo   Bin Meng
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH 2/2] x86: apl: Re-enable loading of SPL   Bin Meng
• [PATCH 1/2] spi: Remove unnecessary #ifdefs in header file   Bin Meng
• [PATCH 1/2] spi: Remove unnecessary #ifdefs in header file   Bin Meng
• [PATCH 2/2] x86: apl: Re-enable loading of SPL   Bin Meng
• [PATCH v3 10/25] x86: mp: Support APs waiting for instructions   Bin Meng
• [PATCH v3 11/25] global_data: Add a generic global_data flag for SMP state   Bin Meng
• [PATCH v3 14/25] x86: mp: Park CPUs before running the OS   Bin Meng
• [PATCH v3 15/25] x86: mp: Add iterators for CPUs   Bin Meng
• [PATCH v3 19/25] x86: mtrr: Update MTRRs on all CPUs   Bin Meng
• [PATCH v3 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Bin Meng
• [PATCH v3 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Bin Meng
• [PATCH 1/1] riscv: Fix linking error when building u-boot-spl with no SMP support   Bin Meng
• [PATCH 1/2] spi: Remove unnecessary #ifdefs in header file   Bin Meng
• [PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes   Bin Meng
• [PATCH] Revert "riscv: Clean up IPI initialization code"   Bin Meng
• [PATCH 1/6] mmc: mmc_spi: correct the while condition   Bin Meng
• [PATCH 2/6] mmc: mmc_spi: generate R1 response for different mmc SPI commands   Bin Meng
• [PATCH 3/6] mmc: read ssr for SD spi   Bin Meng
• [PATCH 4/6] mmc: mmc_spi: Read R2 response for send status command - CMD13   Bin Meng
• [PATCH 5/6] mmc: mmc_spi: Generate R1 response for erase block start and end address   Bin Meng
• [PATCH 6/6] mmc_spi: generate R1b response for erase and stop transmission command   Bin Meng
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Bin Meng
• [PATCH 2/2] Revert "Revert "riscv: sifive: fu540: Add gpio-restart support""   Bin Meng
• [PATCH] arm: cmd_stm32prog: Fix the CONFIG_IS_ENABLED() usage   Bin Meng
• [PATCH] Revert "riscv: Clean up IPI initialization code"   Bin Meng
• [PATCH] arm: cmd_stm32prog: Fix the CONFIG_IS_ENABLED() usage   Bin Meng
• [PATCH v2 1/2] spi: Remove unnecessary #ifdefs in header file   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH v2 5/8] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Bin Meng
• [PATCH v3 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Bin Meng
• [PATCH v3 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Bin Meng
• [PATCH v3 1/4] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH v3 1/4] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH v3 2/4] coral: Enable the copy framebuffer   Bin Meng
• [PATCH v3 3/4] x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME   Bin Meng
• [PATCH v3 4/4] x86: fsp: Support a warning message when DRAM init is slow   Bin Meng
• [PATCH v3 1/4] timer: Allow delays with a 32-bit microsecond timer   Bin Meng
• [PATCH] x86: remove unused setup_pcat_compatibility() stub   Bin Meng
• [PATCH v4 05/35] acpi: Support generation of ACPI code   Bin Meng
• [PATCH v4 06/35] acpi: Support generation of interrupt descriptor   Bin Meng
• [PATCH v4 07/35] gpio: Add a method to convert a GPIO to ACPI   Bin Meng
• [PATCH v4 09/35] acpi: Support generation of GPIO descriptor   Bin Meng
• [PATCH v4 13/35] acpigen: Support writing a length   Bin Meng
• [PATCH v4 19/35] acpi: Support writing Device Properties objects via _DSD   Bin Meng
• [PATCH v4 24/35] acpi: Add support for writing a GPIO power sequence   Bin Meng
• [PATCH v4 25/35] acpi: Add support for a generic power sequence   Bin Meng
• [PATCH v4 29/35] acpi: Support ordering SSDT data by device   Bin Meng
• [PATCH v4 31/35] acpi: Add support for DSDT generation   Bin Meng
• [PATCH v4 34/35] dm: acpi: Enhance acpi_get_name()   Bin Meng
• [PATCH v4 09/35] acpi: Support generation of GPIO descriptor   Bin Meng
• [PATCH v4 12/35] acpi: Support generation of SPI descriptor   Bin Meng
• [PATCH v4 31/35] acpi: Add support for DSDT generation   Bin Meng
• [PATCH v4 00/35] dm: Add programmatic generation of ACPI tables (part B)   Bin Meng
• [PATCH v4 10/25] x86: mp: Support APs waiting for instructions   Bin Meng
• [PATCH v4 11/25] global_data: Add a generic global_data flag for SMP state   Bin Meng
• [PATCH v4 13/25] x86: mp: Allow running functions on multiple CPUs   Bin Meng
• [PATCH v4 15/25] x86: mp: Add iterators for CPUs   Bin Meng
• [PATCH v4 19/25] x86: mtrr: Update MTRRs on all CPUs   Bin Meng
• [PATCH v4 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Bin Meng
• [PATCH v4 29/35] acpi: Support ordering SSDT data by device   Bin Meng
• [PATCH v2 01/44] binman: Allow setting the ROM offset   Bin Meng
• [PATCH v2 02/44] binman: Refactor binman_entry_find() to allow other nodes   Bin Meng
• [PATCH v2 03/44] binman: Add way to locate an entry in memory   Bin Meng
• [PATCH v2 08/44] acpi: Export functions to write sized values   Bin Meng
• [PATCH v2 09/44] acpi: Support generation of a scope   Bin Meng
• [PATCH v2 11/44] acpi: mmc: Generate ACPI info for the PCI SD Card   Bin Meng
• [PATCH v2 12/44] x86: Add bindings for NHLT   Bin Meng
• [PATCH v2 19/44] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Bin Meng
• [PATCH v2 21/44] x86: pinctrl: Set up itss in the probe() method   Bin Meng
• [PATCH v2 22/44] x86: pinctrl: Drop the acpi_path member   Bin Meng
• [PATCH v2 25/44] x86: gpio: Add support for obtaining ACPI info for a GPIO   Bin Meng
• [PATCH v4 12/35] acpi: Support generation of SPI descriptor   Bin Meng
• [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation   Bin Meng
• [PATCH v2 32/44] pmc: Move common registers to the header file   Bin Meng
• [PATCH v2 34/44] x86: apl: Fix save/restore of ITSS priorities   Bin Meng
• [PATCH v2 36/44] x86: apl: Set the correct boot mode in the FSP-M code   Bin Meng
• [PATCH v2 37/44] x86: apl: Adjust FSP-M code to avoid hard-coded address   Bin Meng
• [PATCH v2 39/44] x86: mp: Allow use of mp_run_on_cpus() without MP   Bin Meng
• [PATCH v2 44/44] acpi: Enable ACPI table generation by default on x86   Bin Meng
• [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation   Bin Meng
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Bin Meng
• [PATCH v2 41/44] x86: Drop setup_pcat_compatibility()   Bin Meng
• [PATCH v2 00/44] x86: Programmatic generation of ACPI tables (Part C)   Bin Meng
• [PATCH v2 09/44] acpi: Support generation of a scope   Bin Meng
• [PATCH v2 17/44] sound: Add an ACPI driver for Maxim MAX98357ac   Bin Meng
• [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation   Bin Meng
• [PATCH v2 17/44] sound: Add an ACPI driver for Maxim MAX98357ac   Bin Meng
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Bin Meng
• [PATCH v2 17/44] sound: Add an ACPI driver for Maxim MAX98357ac   Bin Meng
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Bin Meng
• [PATCH] Revert "riscv: Clean up IPI initialization code"   Bin Meng
• [PATCH 1/4] fdtdec: Add fdtdec_get_mem_size_base()   Bin Meng
• [PATCH 2/4] fdtdec: Update fdtdec_setup_mem_size_base_fdt() to call fdtdec_get_mem_size_base()   Bin Meng
• [PATCH 3/4] riscv: dts: hifive-unleashed-a00: Make memory node available to SPL   Bin Meng
• [PATCH 4/4] ram: sifive: Avoid using hardcoded ram base and size   Bin Meng
• [PATCH 1/2] Revert "riscv: Allow use of reset drivers"   Bin Meng
• [PATCH] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• [PATCH v2] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Bin Meng
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH v4 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Bin Meng
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Bin Meng
• [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Bin Meng
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Bin Meng
• [PATCH 4/4] ram: sifive: Avoid using hardcoded ram base and size   Bin Meng
• [PATCH v3 03/10] x86: apl: Set the correct boot mode in the FSP-M code   Bin Meng
• [PATCH v3 00/10] x86: Programmatic generation of ACPI tables (Part C)   Bin Meng
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Bin Meng
• [PATCH] riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc reg   Bin Meng
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Bin Meng
• [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Bin Meng
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Bin Meng
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Bin Meng
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Bin Meng
• [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Bin Meng
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Bin Meng
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH] dm: core: Don't show an ACPI warning if there is no ordering   Bin Meng
• [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Bin Meng
• [PATCH v6 10/25] x86: mp: Support APs waiting for instructions   Bin Meng
• [PATCH v6 11/25] global_data: Add a generic global_data flag for SMP state   Bin Meng
• [PATCH v6 13/25] x86: mp: Allow running functions on multiple CPUs   Bin Meng
• [PATCH v6 14/25] x86: mp: Park CPUs before running the OS   Bin Meng
• [PATCH v6 15/25] x86: mp: Add iterators for CPUs   Bin Meng
• [PATCH v6 19/25] x86: mtrr: Update MTRRs on all CPUs   Bin Meng
• [PATCH v6 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Bin Meng
• [PATCH] dm: core: Don't show an ACPI warning if there is no ordering   Bin Meng
• [PATCH v6 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Bin Meng
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Bin Meng
• [PATCH v2] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Bin Meng
• [PATCH v2 1/2] Revert "riscv: Allow use of reset drivers"   Bin Meng
• [PATCH v2 2/2] Revert "Revert "riscv: sifive: fu540: Add gpio-restart support""   Bin Meng
• [PATCH v2] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH v3] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• [PATCH v2] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH v3] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [RESEND PATCH v3] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH v2 1/2] riscv: dts: hifive-unleashed-a00: Make memory node available to SPL   Bin Meng
• [PATCH v2 2/2] ram: sifive: Avoid using hardcoded ram base and size   Bin Meng
• [PATCH v3] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH v4] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH v4] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH v2 2/2] ram: sifive: Avoid using hardcoded ram base and size   Bin Meng
• [PATCH v3 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Bin Meng
• [PATCH v3 2/5] fu540: prci: use common reset indexes defined in binding header   Bin Meng
• [PATCH v3 3/5] fu540: dtsi: add reset producer and consumer entries   Bin Meng
• [PATCH v2] serial: Fix SIFIVE debug serial dependency   Bin Meng
• [PATCH] x86: irq: Fix some typos   Bin Meng
• [PATCH 5/6] riscv: Update Kendryte device tree for new CLINT driver   Bin Meng
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH 2/6] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Bin Meng
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH v4] riscv: Make SiFive HiFive Unleashed board boot again   Bin Meng
• [PATCH 1/4] azure: Use a login shell everywhere for MSYS2 build   Bin Meng
• [PATCH 2/4] azure: Drop 32-bit MSYS2 build   Bin Meng
• [PATCH 3/4] azure: Add the missing build dependency for MSYS2 build   Bin Meng
• [PATCH 4/4] azure: Switch to use the MSYS2 official installer as the CI base   Bin Meng
• [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support   Bin Meng
• Using gerrit or github for review?   Karsten Merker
• [PATCH 0/2] Update Apollo Lake FSP parameters   Bernhard Messerklinger
• [PATCH 1/2] x86: apl: fsp_bindings: Add support for u64 parameters   Bernhard Messerklinger
• [PATCH 2/2] arch: x86: apl: Update FSP parameters   Bernhard Messerklinger
• [PATCH 0/1] fw_setenv always locks flash whenever it tries to write   Ivan Mikhaylov
• [PATCH 1/1] fw_setenv: lock the flash only if it was locked before   Ivan Mikhaylov
• [PATCH 0/1] fw_setenv always locks flash whenever it tries to write   Ivan Mikhaylov
• [PATCH] watchdog: imx: Support set timeout by wdt command   Mo, Yuezhang
• [PATCH] board: tbs2910: Fix video output with existing environments   Soeren Moch
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH 1/3] ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1   Anand Moon
• [PATCH 2/3] boards: amlogic: add Odroid C4 support   Anand Moon
• [PATCH 3/3] ARM: dts: meson-sm1-odroid-c4: add ethernet PHY reset   Anand Moon
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH] configs: odroid-c2: enable HDMI output   Anand Moon
• [PATCH] configs: odroid-c2: enable HDMI output   Anand Moon
• [PATCH v2] configs: odroid-c2: update for HDMI output, ADC & USB keyboard   Anand Moon
• [PATCH 0/1] Fix SPL_EARLY_BSS applying to normal build   Brian Moyer
• [PATCH 1/1] arm: Add SPL build check to SPL early bss clear   Brian Moyer
• [PATCH 1/1] arm: Add SPL build check to SPL early bss clear   Brian Moyer
• [PATCH v2 0/1] Fix SPL_EARLY_BSS applying to normal build   Brian Moyer
• [PATCH v2 1/1] arm: Add SPL build check to SPL early bss clear   Brian Moyer
• [PATCH] dm: Fix build error when OF_CONTROL is not set   Dan Murphy
• [PATCH] dm: Fix build error when OF_CONTROL is not set   Dan Murphy
• [PATCH v2] dm: Fix build error when OF_CONTROL is not set   Dan Murphy
• [PATCH] dm: Fix build error when OF_CONTROL is not set   Dan Murphy
• [PATCH] rockchip: rk3288: Add OF board setup   Robin Murphy
• [PATCH] rockchip: rk3288: Add OF board setup   Robin Murphy
• [PATCH] imx: Add MYiR Tech MYS-6ULX support   Parthiban Nallathambi
• [PATCH v2] imx: Add MYiR Tech MYS-6ULX support   Parthiban Nallathambi
• [PATCH v2 13/14] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Eric Nelson
• [PATCH v9 1/2] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v9 2/2] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v2 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2 3/3] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v10 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v10 2/2] board: presidio-asic: Add SPI NOR support   Alex Nemirovsky
• [PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Vladimir Oltean
• [PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Vladimir Oltean
• [PATCHv4 02/16] net: fsl_mdio: Correct the MII management register block address   Vladimir Oltean
• [PATCHv4 06/16] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Vladimir Oltean
• [PATCHv4 09/16] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Vladimir Oltean
• [PATCHv4 10/16] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Vladimir Oltean
• [PATCHv4 13/16] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Vladimir Oltean
• [PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Vladimir Oltean
• [PATCHv5 02/18] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Vladimir Oltean
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Igor Opaniuk
• Seemless Boot Splash on iMX-based boards   Igor Opaniuk
• Seemless Boot Splash on iMX-based boards   Igor Opaniuk
• [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10   Igor Opaniuk
• [PATCH v2 01/14] imx: mx7: fix DDRC size in A7-M4 mapping table   Igor Opaniuk
• [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers   Igor Opaniuk
• [PATCH v2 03/14] toradex: tdx-cfg-block: add carrier boards and display adapters   Igor Opaniuk
• [PATCH v2 04/14] toradex: tdx-cfg-block: add support for EEPROM   Igor Opaniuk
• [PATCH v2 05/14] toradex: tdx-cfg-clock: add migration routine from PID8   Igor Opaniuk
• [PATCH v2 06/14] toradex: tdx-cfg-block: add carrier board info printing   Igor Opaniuk
• [PATCH v2 07/14] ARM: dts: imx8mm-verdin: eeprom nodes adjustments   Igor Opaniuk
• [PATCH v2 08/14] verdin-imx8mm: add EEPROM support for carrier board   Igor Opaniuk
• [PATCH v2 09/14] ARM: dts: imx6ull-colibri: move u-boot specific node   Igor Opaniuk
• [PATCH v2 10/14] toradex: common: show boot logo   Igor Opaniuk
• [PATCH v2 11/14] ARM: dts: imx7-colibri: multiple node updates   Igor Opaniuk
• [PATCH v2 12/14] colibri-imx6ull: show boot logo   Igor Opaniuk
• [PATCH v2 13/14] colibri-imx6ull: fix splash screen logo drawing   Igor Opaniuk
• [PATCH v2 14/14] colibri-imx7: fix splash logo drawing   Igor Opaniuk
• [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10   Igor Opaniuk
• Improvements to FIT ciphering   Patrick Oppenlander
• Improvements to FIT ciphering   Patrick Oppenlander
• [PATCH 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   Patrick Oppenlander
• [PATCH 3/3] mkimage: fit: don't cipher ciphered data   Patrick Oppenlander
• [PATCH] mkimage: fit: include image cipher in configuration signature   Patrick Oppenlander
• Improvements to FIT ciphering   Patrick Oppenlander
• [PATCH 01/10] board_f: Introduce arch_setup_bdinfo initcall   Ovidiu Panait
• [PATCH 02/10] board_f: m68k: Factor out m68k-specific bdinfo setup   Ovidiu Panait
• [PATCH 03/10] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH 04/10] board_f: sh: Factor out sh-specific bdinfo setup   Ovidiu Panait
• [PATCH 05/10] board_f: mips: Factor out mips-specific bdinfo setup   Ovidiu Panait
• [PATCH 06/10] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Ovidiu Panait
• [PATCH 07/10] drivers: serial: Make serial_initialize return int   Ovidiu Panait
• [PATCH 08/10] common/board_r: Remove initr_serial wrapper   Ovidiu Panait
• [PATCH 09/10] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait
• [PATCH 10/10] common/board_r: Move blkcache_init call earlier in the boot sequence   Ovidiu Panait
• [PATCH 05/10] board_f: mips: Factor out mips-specific bdinfo setup   Ovidiu Panait
• [PATCH v2 01/14] Kconfig: Introduce CONFIG_SYS_HAS_SRAM   Ovidiu Panait
• [PATCH v2 02/14] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig   Ovidiu Panait
• [PATCH v2 03/14] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig   Ovidiu Panait
• [PATCH v2 04/14] Kconfig: Remove CONFIG_SYS_SRAM_START   Ovidiu Panait
• [PATCH v2 05/14] board_f: Introduce arch_setup_bdinfo initcall   Ovidiu Panait
• [PATCH v2 06/14] board_f: m68k: Factor out m68k-specific bdinfo setup   Ovidiu Panait
• [PATCH v2 07/14] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH v2 08/14] board_f: sh: Factor out sh-specific bdinfo setup   Ovidiu Panait
• [PATCH v2 09/14] board_f: mips: Factor out mips-specific bdinfo setup   Ovidiu Panait
• [PATCH v2 10/14] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Ovidiu Panait
• [PATCH v2 11/14] drivers: serial: Make serial_initialize return int   Ovidiu Panait
• [PATCH v2 12/14] common/board_r: Remove initr_serial wrapper   Ovidiu Panait
• [PATCH v2 13/14] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait
• [PATCH v2 14/14] common/board_r: Move blkcache_init call earlier in the boot sequence   Ovidiu Panait
• [PATCH v2 06/14] board_f: m68k: Factor out m68k-specific bdinfo setup   Ovidiu Panait
• [PATCH 1/6] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig   Ovidiu Panait
• [PATCH v3 01/17] Kconfig: Introduce CONFIG_SYS_HAS_SRAM   Ovidiu Panait
• [PATCH v3 02/17] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig   Ovidiu Panait
• [PATCH v3 03/17] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig   Ovidiu Panait
• [PATCH v3 04/17] Kconfig: Remove CONFIG_SYS_SRAM_START   Ovidiu Panait
• [PATCH v3 05/17] cmd: bdinfo: Move sram info prints to generic code   Ovidiu Panait
• [PATCH v3 06/17] board_f: Introduce setup_bdinfo initcall   Ovidiu Panait
• [PATCH v3 07/17] board_f: Introduce arch_setup_bdinfo initcall   Ovidiu Panait
• [PATCH v3 08/17] board_f: Introduce board_setup_bdinfo_mem initcall   Ovidiu Panait
• [PATCH v3 09/17] board_f: Move sram bdinfo assignments to generic code   Ovidiu Panait
• [PATCH v3 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup   Ovidiu Panait
• [PATCH v3 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH v3 12/17] board_f: Remove setup_board_part1   Ovidiu Panait
• [PATCH v3 13/17] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Ovidiu Panait
• [PATCH v3 14/17] drivers: serial: Make serial_initialize return int   Ovidiu Panait
• [PATCH v3 15/17] common/board_r: Remove initr_serial wrapper   Ovidiu Panait
• [PATCH v3 16/17] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait
• [PATCH v3 17/17] common/board_r: Move blkcache_init call earlier in the boot sequence   Ovidiu Panait
• [PATCH v3 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH v3 08/17] board_f: Introduce board_setup_bdinfo_mem initcall   Ovidiu Panait
• [PATCH v4 01/17] Kconfig: Introduce CONFIG_SYS_HAS_SRAM   Ovidiu Panait
• [PATCH v4 02/17] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig   Ovidiu Panait
• [PATCH v4 03/17] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig   Ovidiu Panait
• [PATCH v4 04/17] Kconfig: Remove CONFIG_SYS_SRAM_START   Ovidiu Panait
• [PATCH v4 05/17] cmd: bdinfo: Move sram info prints to generic code   Ovidiu Panait
• [PATCH v4 06/17] board_f: Introduce setup_bdinfo initcall   Ovidiu Panait
• [PATCH v4 07/17] board_f: Introduce arch_setup_bdinfo initcall   Ovidiu Panait
• [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo   Ovidiu Panait
• [PATCH v4 09/17] board_f: Move sram bdinfo assignments to generic code   Ovidiu Panait
• [PATCH v4 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup   Ovidiu Panait
• [PATCH v4 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH v4 12/17] board_f: Remove setup_board_part1   Ovidiu Panait
• [PATCH v4 13/17] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Ovidiu Panait
• [PATCH v4 14/17] drivers: serial: Make serial_initialize return int   Ovidiu Panait
• [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper   Ovidiu Panait
• [PATCH v4 16/17] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait
• [PATCH v4 17/17] common/board_r: Move blkcache_init call earlier in the boot sequence   Ovidiu Panait
• [PATCH v3 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Ovidiu Panait
• [PATCH] imx: Add MYiR Tech MYS-6ULX support   Parthiban
• [PATCH] imx: Add MYiR Tech MYS-6ULX support   Parthiban
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Pragnesh Patel
• [PATCH v2 2/2] ram: sifive: Avoid using hardcoded ram base and size   Pragnesh Patel
• [PATCH v2 1/2] riscv: dts: hifive-unleashed-a00: Make memory node available to SPL   Pragnesh Patel
• [PATCH v2 2/2] ram: sifive: Avoid using hardcoded ram base and size   Pragnesh Patel
• [PATCH v3 3/5] fu540: dtsi: add reset producer and consumer entries   Pragnesh Patel
• [PATCH v3 2/5] fu540: prci: use common reset indexes defined in binding header   Pragnesh Patel
• [PATCH v3 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Pragnesh Patel
• [PATCH 6/6] riscv: Update SiFive device tree for new CLINT driver   Pragnesh Patel
• master u-boot broken for HiFive Unleashed   Atish Patra
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Atish Patra
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Atish Patra
• [PATCH 1/4] fs/squashfs: new filesystem   Thomas Petazzoni
• [PATCH 1/4] fs/squashfs: new filesystem   Thomas Petazzoni
• [PATCH 3/4] fs/squashfs: add sources for zlib decompression   Thomas Petazzoni
• [PATCH 0/3] squashfs fixes   Thomas Petazzoni
• [PATCH 1/3] cmd/sqfs.c, include/fs.h: fix build failures, don't expose do_sqfs_*() functions globally   Thomas Petazzoni
• [PATCH 2/3] fs/squashfs: use "struct disk_partition" instead of "disk_partition_t"   Thomas Petazzoni
• [PATCH 3/3] fs/squashfs: do not use CMD_RET_* defines in the filesystem code   Thomas Petazzoni
• [PATCH] fs/squashfs/sqfs.c: use sqfs_read_sblk() in sqfs_probe()   Thomas Petazzoni
• [PATCH 0/3] squashfs fixes   Thomas Petazzoni
• sunxi: Add SPI Flash support for Orange PI R1   Yaroslav Petrov
• sunxi: Add SPI Flash support for Orange PI R1   Yaroslav Petrov
• rk3399-gru-kevin: issues on bringup   Marty E. Plummer
• rk3399-gru-kevin: issues on bringup   Marty E. Plummer
• rk3399-gru-kevin: issues on bringup   Marty E. Plummer
• [PATCH 00/15] net: sun8i-emac fixes and cleanups   Andre Przywara
• [PATCH 01/15] net: sun8i-emac: Bail out on PHY error   Andre Przywara
• [PATCH 02/15] net: sun8i_emac: Don't hand out TX descriptor too early   Andre Przywara
• [PATCH 03/15] net: sun8i_emac: Simplify mdio_read/mdio_write functions   Andre Przywara
• [PATCH 04/15] net: sun8i_emac: Remove pointless wrapper functions   Andre Przywara
• [PATCH 05/15] net: sun8i_emac: Name magic bits and simplify read-modify-write calls   Andre Przywara
• [PATCH 06/15] net: sun8i_emac: Improve cache maintenance on RX descriptor init   Andre Przywara
• [PATCH 07/15] net: sun8i_emac: Reduce cache maintenance on TX descriptor init   Andre Przywara
• [PATCH 08/15] net: sun8i_emac: Drop unneeded cache invalidation before sending   Andre Przywara
• [PATCH 09/15] net: sun8i_emac: Wrap and simplify cache maintenance operations   Andre Przywara
• [PATCH 10/15] net: sun8i_emac: Fix overlong lines   Andre Przywara
• [PATCH 11/15] net: sun8i_emac: Fix MAC soft reset   Andre Przywara
• [PATCH 12/15] net: sun8i_emac: Simplify and fix error handling for RX   Andre Przywara
• [PATCH 13/15] net: sun8i-emac: Make internal PHY handling more robust   Andre Przywara
• [PATCH 14/15] net: sun8i-emac: Lower MDIO frequency   Andre Przywara
• [PATCH 15/15] sunxi: Pine-H64: Explicitly enable PHY regulator   Andre Przywara
• [PATCH v3 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH   André Przywara
• [PATCH v3 3/5] arm: qemu: implement enable_caches()   André Przywara
• [PATCH v3 5/5] arm: qemu: override flash accessors to use virtualizable instructions   André Przywara
• [PATCH 14/15] net: sun8i-emac: Lower MDIO frequency   André Przywara
• [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi from Linux 5.8-rc1   André Przywara
• [PATCH 8/8] Initial Pine64 Pinephone support   André Przywara
• [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi from Linux 5.8-rc1   André Przywara
• [PATCH 1/1] test/dm: check if devices exist   Philippe REYNES
• [PATCH v2 8/8] test: dm: add a test for class button   Philippe REYNES
• [PATCH v2 8/8] test: dm: add a test for class button   Philippe REYNES
• Improvements to FIT ciphering   Philippe REYNES
• [PATCH 1/3] mkimage: fit: only process one cipher node   Philippe REYNES
• [PATCH 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   Philippe REYNES
• [PATCH 3/3] mkimage: fit: don't cipher ciphered data   Philippe REYNES
• [PATCH v2 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   Philippe REYNES
• [PATCH v2 3/3] mkimage: fit: don't cipher ciphered data   Philippe REYNES
• [PATCH] mkimage: fit: include image cipher in configuration signature   Philippe REYNES
• [PATCH 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes   Vignesh Raghavendra
• [PATCH 0/6] TI: AM654/j721e: Ringacc and UDMA updates   Vignesh Raghavendra
• [PATCH 1/6] soc: ti: k3-ringacc: Move state tracking variables under a struct   Vignesh Raghavendra
• [PATCH 2/6] soc: ti: k3-ringacc: Add an API to request pair of rings   Vignesh Raghavendra
• [PATCH 3/6] soc: ti: k3-ringacc: Separate soc specific initialization   Vignesh Raghavendra
• [PATCH 4/6] dma: ti: k3-udma: Introduce udma_chan_config struct   Vignesh Raghavendra
• [PATCH 5/6] dma: ti: k3-udma: Move RX descriptor ring entries to rflow struct   Vignesh Raghavendra
• [PATCH 6/6] dma: ti: k3-udma: Switch to k3_ringacc_request_rings_pair   Vignesh Raghavendra
• [PATCH 0/5] TI: AM654/J721e: Sync CPSW DT node from kernel   Vignesh Raghavendra
• [PATCH 1/5] net: ti: am65-cpsw-nuss: Remove dead code   Vignesh Raghavendra
• [PATCH 2/5] net: ti: am65-cpsw-nuss: Set ALE default thread enable   Vignesh Raghavendra
• [PATCH 3/5] net: ti: am65-cpsw-nuss: Update driver to use kernel DT   Vignesh Raghavendra
• [PATCH 4/5] arm: dts: k3-j721e: Sync CPSW DT node from kernel   Vignesh Raghavendra
• [PATCH 5/5] arm: dts: k3-am65: Sync CPSW DT node from kernel   Vignesh Raghavendra
• [PATCH v3 0/3] Sync UDMA bindings from kernel   Vignesh Raghavendra
• [PATCH v3 1/3] dma: ti: Add static PSIL endpoint information   Vignesh Raghavendra
• [PATCH v3 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data   Vignesh Raghavendra
• [PATCH v3 3/3] arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT   Vignesh Raghavendra
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Vignesh Raghavendra
• [PATCH 4/5] arm: dts: k3-j721e: Sync CPSW DT node from kernel   Vignesh Raghavendra
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Vignesh Raghavendra
• [PATCH v6 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Vignesh Raghavendra
• [PATCH 1/5] mtd: spi: Drop redundent SPI flash driver   Vignesh Raghavendra
• [PATCH 5/5] mtd: spi: Switch to MTD uclass (absolute UCLASS_SPI_FLASH)   Vignesh Raghavendra
• [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code   Vignesh Raghavendra
• [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code   Vignesh Raghavendra
• Signing a fit with no images   Ranran
• [PATCH 00/12] Introduce B1x5v2 support   Sebastian Reichel
• [PATCH 01/12] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Sebastian Reichel
• [PATCH 02/12] bootcount: add a DM SPI flash backing store for bootcount   Sebastian Reichel
• [PATCH 03/12] gpio: mxc_gpio: add support to read status of output gpios   Sebastian Reichel
• [PATCH 04/12] rtc: m41t62: reset SQW in m41t62_rtc_reset   Sebastian Reichel
• [PATCH 05/12] rtc: m41t62: add oscillator fail bit reset support   Sebastian Reichel
• [PATCH 06/12] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL   Sebastian Reichel
• [PATCH 07/12] poweroff: Introduce poweroff uclass   Sebastian Reichel
• [PATCH 08/12] poweroff: Add poweroff-gpio driver   Sebastian Reichel
• [PATCH 09/12] board: ge: common: rename ge_common.c to ge_rtc.c   Sebastian Reichel
• [PATCH 10/12] board: ge: common: add config option for RTC and VPD feature   Sebastian Reichel
• [PATCH 11/12] board: ge: common: vpd: separate I2C specific code   Sebastian Reichel
• [PATCH 12/12] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2   Sebastian Reichel
• [PATCH] lib: libfdt: fdt_region: avoid NULL pointer access   Philippe Reynes
• [PATCH 1/7] dm: button: add an uclass for button   Philippe Reynes
• [PATCH 2/7] dm: button: add a driver for button driven by gpio   Philippe Reynes
• [PATCH 3/7] cmd: button: add a new 'button' command   Philippe Reynes
• [PATCH 4/7] sandbox: dtsi: add buttons   Philippe Reynes
• [PATCH 5/7] sandbox64: enable button   Philippe Reynes
• [PATCH 6/7] sandbox: enable button   Philippe Reynes
• [PATCH 7/7] test/py: add tests for the button commands   Philippe Reynes
• [PATCH v2 1/8] dm: button: add an uclass for button   Philippe Reynes
• [PATCH v2 2/8] dm: button: add a driver for button driven by gpio   Philippe Reynes
• [PATCH v2 3/8] cmd: button: add a new 'button' command   Philippe Reynes
• [PATCH v2 4/8] sandbox: dtsi: add buttons   Philippe Reynes
• [PATCH v2 5/8] sandbox64: enable button   Philippe Reynes
• [PATCH v2 6/8] sandbox: enable button   Philippe Reynes
• [PATCH v2 7/8] test/py: add tests for the button commands   Philippe Reynes
• [PATCH v2 8/8] test: dm: add a test for class button   Philippe Reynes
• [PATCH] sandbox, test: change hog gpio   Philippe Reynes
• [PATCH v3 1/8] dm: button: add an uclass for button   Philippe Reynes
• [PATCH v3 2/8] dm: button: add a driver for button driven by gpio   Philippe Reynes
• [PATCH v3 3/8] cmd: button: add a new 'button' command   Philippe Reynes
• [PATCH v3 4/8] sandbox: dtsi: add buttons   Philippe Reynes
• [PATCH v3 5/8] sandbox64: enable button   Philippe Reynes
• [PATCH v3 6/8] sandbox: enable button   Philippe Reynes
• [PATCH v3 7/8] test/py: add tests for the button commands   Philippe Reynes
• [PATCH v3 8/8] test: dm: add a test for class button   Philippe Reynes
• [PATCH] [dh stm32mp1] remove env location override   Jakob Riepler
• Pull request for UEFI sub-system for efi-2020-07-rc6 (2)   Tom Rini
• [PATCH] pci: rockchip: Mark inline functions as static inline   Tom Rini
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/next   Tom Rini
• [RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master 2020-07-02(2)   Tom Rini
• [PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Tom Rini
• [PATCH v6 2/3] sandbox, test: add test for GPIO_HOG function   Tom Rini
• [PATCH 01/10] kconfiglib: Update to the 14.1.0 release   Tom Rini
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Tom Rini
• [PATCH 03/10] Don't start ad-hoc games with -Wno-maybe-initialized   Tom Rini
• [PATCH 04/10] tegra: Convert from ACCESS_ONCE to READ/WRITE_ONCE   Tom Rini
• [PATCH 05/10] x86: Convert from ACCESS_ONCE to READ/WRITE_ONCE   Tom Rini
• [PATCH 06/10] socfpga: Mark socfpga_fpga_add() as static inline in the non-FPGA case   Tom Rini
• [PATCH 07/10] compiler*.h: sync include/linux/compiler*.h with Linux 5.7-rc5   Tom Rini
• [PATCH 08/10] compiler_types.h: Re-introduce CONFIG_OPTIMIZE_INLINING for U-Boot   Tom Rini
• [PATCH 09/10] compilers: Introduce options for forcing inlining on SPL/TPL   Tom Rini
• [PATCH 10/10] socfpga: Enable optimized inlining on stratix10   Tom Rini
• [PATCH] kconfig: show compiler version text in the top comment   Tom Rini
• [PATCH] Remove CROSS_COMPILE default from arch/*/config.mk   Tom Rini
• [PATCH] checkpatch.pl: Fully re-sync with v5.7   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1   Tom Rini
• [ANN] U-Boot v2020.07 released   Tom Rini
• [PATCH] Revert "riscv: sifive: fu540: Add gpio-restart support"   Tom Rini
• 'next' now merged to 'master'   Tom Rini
• [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Tom Rini
• [PATCH v2] arm64: issue ISB after updating system registers   Tom Rini
• [PATCH] Revert "riscv: sifive: fu540: Add gpio-restart support"   Tom Rini
• [PATCH] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Tom Rini
• [PATCH] test: Have test_fs work with non-functional guestmount tools   Tom Rini
• [PATCH v2 16/23] ti: Drop sdp4430 board   Tom Rini
• [PATCH] common/board_f: Respect original FDT size while relocating   Tom Rini
• [PATCH] fs: fat: fix fat iteration   Tom Rini
• [PATCH v2] arm64: issue ISB after updating system registers   Tom Rini
• [PULL] u-boot-atmel-2020.10-a   Tom Rini
• [PATCH v2 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Tom Rini
• [PATCH] test: Have test_fs work with non-functional guestmount tools   Tom Rini
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707   Tom Rini
• [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Tom Rini
• [PATCH v3 1/3] cmd: part: Add subcommand to list supported partition tables   Tom Rini
• [PATCH v3 2/3] cmd: fs: Add command to list supported fs types   Tom Rini
• [PATCH v3 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Tom Rini
• [PATCH v3 1/1] cmd: blkls: Add blkls command   Tom Rini
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [PATCH v4 1/2] Actions: OWL: Calculate SDRAM size   Tom Rini
• [PATCH v4 2/2] arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs   Tom Rini
• [PATCH v1 1/7] clk: actions: Add Ethernet clocks   Tom Rini
• [PATCH v1 2/7] net: phy: realtek: Add support for RTL8201F PHY module.   Tom Rini
• [PATCH v1 3/7] net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings   Tom Rini
• [PATCH v1 4/7] net: designware: s700: Add glue code for S700 mac   Tom Rini
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Tom Rini
• [PATCH v1 6/7] owl: Kconfig: Enable DM eth for OWL platform   Tom Rini
• [PATCH v1 7/7] configs: Enable mac and phy configs   Tom Rini
• [PATCH v6 3/3] gpio: search for gpio label if gpio is not found through bank name   Tom Rini
• [PATCH 1/1] fs: fat_write: fix short name creation.   Tom Rini
• [PATCH 2/4] trace: clang compatible handling of gd register   Tom Rini
• [PATCH 3/4] arm: remove outdated comment concerning -ffixed-x18   Tom Rini
• [PATCH 4/4] arm: use correct argument size of special registers   Tom Rini
• [PATCH] test_sleep.py: make sleep time and margin configurable   Tom Rini
• [PATCH 1/7] arm: vexpress64: Fix counter frequency   Tom Rini
• [PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address   Tom Rini
• [PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address   Tom Rini
• [PATCH 4/7] arm: juno: Enable DM_ETH   Tom Rini
• [PATCH 5/7] sata_sil: Enable DM_PCI operation   Tom Rini
• [PATCH 6/7] arm: juno: Enable PCI   Tom Rini
• [PATCH 7/7] arm: juno: Enable SATA controller   Tom Rini
• Pull request: u-boot-rockchip-20200708   Tom Rini
• 'next' now merged to 'master'   Tom Rini
• [PATCH] gpio: fix test.py for gpio label lookup   Tom Rini
• [PATCH v2 2/2] pwm: Add PWM driver for SiFive SoC   Tom Rini
• [PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes   Tom Rini
• CONFIG_NR_DRAM_BANKS in configs/rpi_4* deleted   Tom Rini
• test/py GPIO failure in u-boot/master   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20200708   Tom Rini
• [PATCH v2 16/23] ti: Drop sdp4430 board   Tom Rini
• [PATCH 1/2] tpm: add #ifndef to fix redeclaration build errors   Tom Rini
• [PATCH] bugfix: tpm2_tis_spi: redeclaration compile error   Tom Rini
• [PATCH] lib: rsa: function to verify a signature against a hash   Tom Rini
• [PATCH] debug_uart: Add CR before and after announce string   Tom Rini
• [PATCH v3 1/4] spl: fix format of function documentation   Tom Rini
• [PATCH v3 2/4] spl: fit: fail fit loading in case of FDT appending error   Tom Rini
• [PATCH v3 3/4] spl: fit: nand: fix fit loading in case of bad blocks   Tom Rini
• [PATCH v3 4/4] spl: fit: improve spl_nand_fit_read(...) readability   Tom Rini
• [PATCH 1/6] Update MEM_SUPPORT_64BIT_DATA to be always defined   Tom Rini
• [PATCH 2/6] cmd: mem: Use a macro to avoid #ifdef in help   Tom Rini
• [PATCH 3/6] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Tom Rini
• [PATCH 4/6] display_options: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Tom Rini
• [PATCH 5/6] command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Tom Rini
• [PATCH 6/6] cmd: Add a memory-search command   Tom Rini
• [PATCH] sata_sil: make it buildable with DM_PCI   Tom Rini
• [PATCH] tpm: add TPM2_GetRandom command support   Tom Rini
• [PATCH v2] tpm2: tis_spi: add linux compatible fallback string   Tom Rini
• [PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Tom Rini
• [PATCH v6 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Tom Rini
• [PATCH v6 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Tom Rini
• [PATCH v6 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Tom Rini
• [PATCH v6 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Tom Rini
• [PATCH v6 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Tom Rini
• [PATCH v6 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Tom Rini
• [PATCH v2] cmd: add a panic command   Tom Rini
• [PATCH v7 1/1] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Tom Rini
• using sudo?, Re: [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   Tom Rini
• using sudo?, Re: [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   Tom Rini
• [v2] test: Have test_fs work with non-functional guestmount tools   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Tom Rini
• [PATCH 2/3] msm_serial: Read bit rate register value from DT   Tom Rini
• [PATCH 3/3] msm_gpio: Add support for Qualcomm IPQ40xx   Tom Rini
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Tom Rini
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Tom Rini
• [PATCH] github: azure: Update our GitHub template to note for CI   Tom Rini
• [GIT PULL] rpi-next for v2020.10   Tom Rini
• [PATCH v5 1/6] powerpc: move ADDR_MAP to Kconfig   Tom Rini
• [PATCH v5 2/6] arm: update comments to the common style   Tom Rini
• [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map   Tom Rini
• [PATCH v5 4/6] mmc: bcm283x: fix int to pointer cast   Tom Rini
• [PATCH v5 5/6] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Tom Rini
• [PATCH v5 6/6] config: Enable support for the XHCI controller on RPI4 board   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH v2 1/1] CI: show skipped Python tests   Tom Rini
• [GIT PULL] UniPhier SoC updates for v2020.10   Tom Rini
• [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION   Tom Rini
• [PATCH 1/1] .gitlab-ci.yml: copy GRUB to correct build path   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH 1/1] Dockerfile: compile QEMU for Nokia N900 emulation   Tom Rini
• Using gerrit or github for review?   Tom Rini
• Using gerrit or github for review?   Tom Rini
• Using gerrit or github for review?   Tom Rini
• [PATCH 1/1] Dockerfile: provide kernel for libguestfs-tools   Tom Rini
• [PATCH 1/1] Dockerfile: compile QEMU for Nokia N900 emulation   Tom Rini
• [PATCH 1/1] Dockerfile: provide kernel for libguestfs-tools   Tom Rini
• Using gerrit or github for review?   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1 (3)   Tom Rini
• [GIT PULL] TI changes for v2020.10-rc1   Tom Rini
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Tom Rini
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Tom Rini
• [PATCH] serial: Fix SIFIVE debug serial dependency   Tom Rini
• [PATCH] test: use virt-make-fs to build image   Tom Rini
• [PATCH v4 14/15] doc: add README doc for bcmns3 platform   Tom Rini
• [v2] test: Have test_fs work with non-functional guestmount tools   Tom Rini
• [PATCH 1/4] fs/squashfs: new filesystem   Tom Rini
• [PATCH 1/4] fs/squashfs: new filesystem   Tom Rini
• [PATCH] github: azure: Update our GitHub template to note for CI   Tom Rini
• [PATCH v2 1/1] .gitlab-ci.yml: copy GRUB to correct build path   Tom Rini
• [PATCH 1/1] Azure: copy GRUB to correct build path   Tom Rini
• [GIT PULL] please pull mmc-7-24-2020   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1 (4)   Tom Rini
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Tom Rini
• [PATCH 1/4] lmb/bdinfo: dump lmb info via bdinfo   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200716   Tom Rini
• [PATCH 1/2] imx8m: ddrphy_utils: Improve coding style   Tom Rini
• [PATCH 2/2] imx8m: soc: Remove unneeded space   Tom Rini
• [PATCH 1/1] doc: Coccinelle: move to HTML doc   Tom Rini
• [PATCH v2] lz4: fix decompressor on big-endian powerpc   Tom Rini
• [PATCH] Convert CONFIG_MXC_UART to Kconfig   Tom Rini
• [PATCH 2/4] image: fdt: bail out with error if no boot time FDT image found   Tom Rini
• [PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image   Tom Rini
• [PATCH 4/4] cmd: booti: convert the debug print about image move to printf   Tom Rini
• [PATCH v2 1/1] spl: fix ext4fs_mount return code handling   Tom Rini
• [PATCH] Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig   Tom Rini
• [PATCH] lib: zlib: Remove offset pointer optimization in inftrees.c   Tom Rini
• [PATCH] Makefile: Silence relocate-rela call   Tom Rini
• [PATCH] arm64: Remove CONFIG_SYS_FULL_VA macro   Tom Rini
• [PATCH 1/3] treewide: convert bd_t to struct bd_info by coccinelle   Tom Rini
• [PATCH 2/3] treewide: convert bd_t to struct bd_info manually   Tom Rini
• [PATCH 3/3] asm/u-boot.h: remove bd_t definitions   Tom Rini
• [PATCH v2 1/1] fs: error handling in do_load()   Tom Rini
• [PATCH] doc: multi-dtb-fit: Remove double underscores   Tom Rini
• [PATCH] remove include/config_defaults.h   Tom Rini
• [PATCH v2] mkimage: Fix error message if write less data then expected   Tom Rini
• [PATCH] fixdep: fix CONFIG_IS_ENABLED etc. handling   Tom Rini
• [PATCH 1/1] doc: correct description of crash dumps   Tom Rini
• [PATCH] board/km: update MAINTAINERS email   Tom Rini
• [PATCH] mtd: mtdpart: use uint64_t instead of int for cur_off   Tom Rini
• [PATCH] doc: fit: Write hex address as hex instead of int   Tom Rini
• [PATCH v1] include: pci_ids: Add Cavium devices   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200716   Tom Rini
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Tom Rini
• [PULL] u-boot-mips   Tom Rini
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Tom Rini
• [PATCH 07/10] compiler*.h: sync include/linux/compiler*.h with Linux 5.7-rc5   Tom Rini
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [RFC] travis: update sbsigntools to 0.9.4   Tom Rini
• Reproducibility regression with mx6cuboxi   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH] Dockerfile: update sbsigntools to v0.9.4   Tom Rini
• [PATCH] travis: update sbsigntools to 0.9.4   Tom Rini
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Tom Rini
• Reproducibility regression with mx6cuboxi   Tom Rini
• Reproducibility regression with mx6cuboxi   Tom Rini
• Pull request: u-boot-rockchip-20200722   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc1 (5)   Tom Rini
• Please pull u-boot-dm   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master 20200724   Tom Rini
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Tom Rini
• [PATCH V2 2/7] env: Add H_DEFAULT flag   Tom Rini
• [PATCH V2 3/7] env: Discern environment coming from external storage   Tom Rini
• [PATCH V2 5/7] env: nowhere: Implement .load callback   Tom Rini
• [PATCH V2 6/7] env: Add option to only ever append environment   Tom Rini
• [PATCH V2 7/7] env: Add support for explicit write access list   Tom Rini
• [PATCH V2 4/7] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH] mvebu: bubt: Drop dead code   Tom Rini
• [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
• [PATCH] mvebu: bubt: Drop dead code   Tom Rini
• [PATCH] env/fat.c: allow loading from a FAT partition on the MMC boot device   Tom Rini
• Reproducibility regression with mx6cuboxi   Tom Rini
• Reproducibility regression with mx6cuboxi   Tom Rini
• [PATCH v3 05/14] env: nowhere: add .load ops   Tom Rini
• [PATCH 1/1] test: do not rely on => being the prompt   Tom Rini
• [PATCH] env/fat.c: allow loading from a FAT partition on the MMC boot device   Tom Rini
• [PATCH] env: correct overflow check of env_has_init size   Tom Rini
• [PATCH] env: add failing trace in env_save   Tom Rini
• [RESEND PATCH 1/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL   Tom Rini
• [RESEND PATCH 2/3] env: mmc: correct the offset returned by mmc_offset_try_partition   Tom Rini
• [RESEND PATCH 3/3] env: mmc: add redundancy support in mmc_offset_try_partition   Tom Rini
• [RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info   Tom Rini
• [RESEND PATCH v5 2/4] cmd: env: check real location for env info command   Tom Rini
• [RESEND PATCH v5 3/4] configs: sandbox: Enable sub command 'env info'   Tom Rini
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Tom Rini
• [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers   Tom Rini
• [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH] travis: Update to python3-pyelftools   Tom Rini
• [PULL] u-boot-sh/net   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-sh/net   Tom Rini
• [v2] travis: Install pyelftools via pip   Tom Rini
• Please pull u-boot-dm (take 2)   Tom Rini
• [v2] travis: Install pyelftools via pip   Tom Rini
• [PATCH 8/8] Initial Pine64 Pinephone support   Tom Rini
• pull request of u-boot-fsl-qoriq for v2020.10   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20200727   Tom Rini
• [ANN] U-Boot v2020.10-rc1 released   Tom Rini
• [PATCH V2 4/7] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 1/4] azure: Use a login shell everywhere for MSYS2 build   Tom Rini
• [PATCH 2/4] azure: Drop 32-bit MSYS2 build   Tom Rini
• [PATCH 3/4] azure: Add the missing build dependency for MSYS2 build   Tom Rini
• [PATCH 4/4] azure: Switch to use the MSYS2 official installer as the CI base   Tom Rini
• [PATCH] Convert CONFIG_BOOTP_DNS2 to Kconfig   Tom Rini
• [PATCH 1/2] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig   Tom Rini
• [PATCH 2/2] Convert CONFIG_SPL_NAND_BASE et al to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_ENV_OVERWRITE to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_BOOTP_SEND_HOSTNAME to Kconfig   Tom Rini
• [PATCH] configs: Remove dead CONFIG options   Tom Rini
• [PATCH] Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig   Tom Rini
• [PATCH 1/2] Kconfig: add SPL_LOAD_FIT_ADDRESS   Tom Rini
• [PATCH 2/2] configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigs   Tom Rini
• [U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   Tom Rini
• [U-boot, V2, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629   Tom Rini
• [PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623   Tom Rini
• [PATCH 1/3] arm: Add support for Qualcomm IPQ40xx family   Tom Rini
• [PATCH 2/3] msm_serial: Read bit rate register value from DT   Tom Rini
• [PATCH 3/3] msm_gpio: Add support for Qualcomm IPQ40xx   Tom Rini
• [PATCH v3 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH   Tom Rini
• [PATCH v3 2/5] arm: qemu: enable LPAE on 32-bit   Tom Rini
• [PATCH v3 3/5] arm: qemu: implement enable_caches()   Tom Rini
• [PATCH v3 4/5] arm: qemu: disable the EFI workaround for older GRUB   Tom Rini
• [PATCH v3 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Tom Rini
• [PATCH v4 01/14] arm: add mach-nexell (header files)   Tom Rini
• [PATCH v4 02/14] arm: add mach-nexell (all files except header files)   Tom Rini
• [PATCH v4 03/14] gpio: add nexell driver   Tom Rini
• [PATCH v4 04/14] i2c: add nexell driver   Tom Rini
• [PATCH v4 05/14] mmc: add nexell driver   Tom Rini
• [PATCH v4 06/14] pinctrl: add nexell driver   Tom Rini
• [PATCH v4 07/14] pwm: add driver for nexell   Tom Rini
• [PATCH v4 08/14] video: add nexell video driver (soc: displaytop)   Tom Rini
• [PATCH v4 09/14] video: add nexell video driver (soc: mlc, mipi)   Tom Rini
• [PATCH v4 10/14] video: add nexell video driver (soc: lvds, hdmi)   Tom Rini
• [PATCH v4 11/14] video: add nexell video driver (soc: dpc, makefile)   Tom Rini
• [PATCH v4 12/14] video: add nexell video driver (display/video driver)   Tom Rini
• [PATCH v4 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Tom Rini
• [PATCH v4 14/14] arm: add (default) config for nanopi2 board   Tom Rini
• [PATCH 1/3] board: mediatek: fix mmc_get_boot_dev() for platforms without external SD   Tom Rini
• [PATCH 2/3] board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environment   Tom Rini
• [PATCH 3/3] board: mediatek: Add support for UniElec U7623 board   Tom Rini
• [PATCH v3 0/5] Add support for the SquashFS filesystem   Tom Rini
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Tom Rini
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Tom Rini
• [PATCH v6 1/2] drivers: gpio: add broadcom iproc gpio driver support   Tom Rini
• [PATCH v6 2/2] gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3   Tom Rini
• [PATCH v5 01/15] board: ns3: add support for Broadcom Northstar 3   Tom Rini
• [PATCH v5 02/15] arm: cpu: armv8: add L3 memory flush support   Tom Rini
• [PATCH v5 03/15] configs: ns3: enable clock subsystem   Tom Rini
• [PATCH v5 04/15] dt-bindings: memory: ns3: add memory definitions   Tom Rini
• [PATCH v5 05/15] board: ns3: add api to save boot parameters passed from BL31   Tom Rini
• [PATCH v5 06/15] board: ns3: default reset type to L3   Tom Rini
• [PATCH v5 07/15] board: ns3: program GIC LPI tables   Tom Rini
• [PATCH v5 08/15] configs: ns3: enable GIC_V3 ITS   Tom Rini
• [PATCH v5 09/15] dt-bindings: memory: ns3: add ddr memory definition   Tom Rini
• [PATCH v5 10/15] board: ns3: define ddr memory layout   Tom Rini
• [PATCH v5 11/15] board: ns3: limit U-boot relocation within 16MB memory   Tom Rini
• [PATCH v5 12/15] include/configs: ns3: add env variables for Linux boot   Tom Rini
• [PATCH v5 13/15] include/configs: ns3: add support for flashing images   Tom Rini
• [PATCH v5 14/15] doc: add README doc for bcmns3 platform   Tom Rini
• [PATCH v5 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Tom Rini
• [PATCH v5 1/7] configs: ns3: enable pinctrl driver   Tom Rini
• [PATCH v5 2/7] dt-bindings: pinctrl: add ns3 pads definition   Tom Rini
• [PATCH v5 3/7] configs: ns3: enable BCM IPROC mmc driver   Tom Rini
• [PATCH v5 4/7] configs: ns3: enable mmc commands   Tom Rini
• [PATCH v5 5/7] configs: ns3: enable gpt commands   Tom Rini
• [PATCH v5 6/7] configs: ns3: enable EXT4 and FAT fs support   Tom Rini
• [PATCH v5 7/7] configs: ns3: enable sp805 watchdog driver   Tom Rini
• [PATCH v4 1/3] configs: ns3: enable FIT config   Tom Rini
• [PATCH v4 2/3] board: ns3: add FIT image its file   Tom Rini
• [PATCH v4 3/3] board: ns3: add development keys used in FIT   Tom Rini
• [PATCH v5 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Tom Rini
• [PATCH v5 2/2] configs: ns3: enable tee and optee driver   Tom Rini
• [PATCH v4 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Tom Rini
• [PATCH v4 2/2] arch: arm: use dt and UCLASS_SYSCON to get gic lpi details   Tom Rini
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200729   Tom Rini
• [PATCH v3 3/5] include/u-boot, lib/zlib: add sources for zlib decompression   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH v2] travis: update sbsigntools to 0.9.4   Tom Rini
• [PATCH 0/1] fw_setenv always locks flash whenever it tries to write   Tom Rini
• [PATCH v2] travis: update sbsigntools to 0.9.4   Tom Rini
• [PATCH] test: efi_selftest: Do not force serial# setting   Tom Rini
• PowerPC progress   Tom Rini
• [PATCH V2 5/7] env: nowhere: Implement .load callback   Tom Rini
• [RESEND PATCH] env: add prototypes for weak function   Tom Rini
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Tom Rini
• [PATCH V2 2/7] env: Add H_DEFAULT flag   Tom Rini
• [PATCH V2 3/7] env: Discern environment coming from external storage   Tom Rini
• [PATCH V2 6/7] env: Add option to only ever append environment   Tom Rini
• [PATCH V2 7/7] env: Add support for explicit write access list   Tom Rini
• [PATCH 1/1] fw_setenv: lock the flash only if it was locked before   Tom Rini
• [PATCH v4 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE   Tom Rini
• [PATCH v4 02/14] env: ext4: set gd->env_valid   Tom Rini
• [PATCH v4 03/14] env: sf: avoid space in backend name   Tom Rini
• [PATCH v4 04/14] env: correctly handle env_load_prio   Tom Rini
• [PATCH v4 05/14] env: nowhere: add .load ops   Tom Rini
• [PATCH v4 06/14] env: the ops driver load becomes mandatory in struct env_driver   Tom Rini
• [PATCH v4 07/14] cmd: env: add env load command   Tom Rini
• [PATCH v4 08/14] cmd: env: add env select command   Tom Rini
• [PATCH v4 09/14] configs: sandbox: activate env in ext4 support   Tom Rini
• [PATCH v4 10/14] configs: sandbox: activate command env select and env load   Tom Rini
• [PATCH v4 11/14] test: environment in ext4   Tom Rini
• [PATCH v4 12/14] env: ext4: introduce new function env_ext4_save_buffer   Tom Rini
• [PATCH v4 13/14] env: ext4: add support of command env erase   Tom Rini
• [PATCH v4 14/14] test: sandbox: add test for erase command   Tom Rini
• [PATCH 1/1] test: do not rely on => being the prompt   Tom Rini
• [PATCH] test: efi_selftest: Do not force serial# setting   Tom Rini
• [PATCH] sunxi: Add support for using UART4 as console on A64   Maxime Ripard
• [PATCH 00/15] net: sun8i-emac fixes and cleanups   Maxime Ripard
• [PATCH] sunxi: Add support for using UART4 as console on A64   Maxime Ripard
• [RFC PATCH v2] sunxi: Add UART4 console support for A64   Maxime Ripard
• [PATCH 8/8] Initial Pine64 Pinephone support   Maxime Ripard
• sunxi: Add SPI Flash support for Orange PI R1   Peter Robinson
• sunxi: Add SPI Flash support for Orange PI R1   Peter Robinson
• Pinebook Pro keyboard (RK3399 OHCI)?   Peter Robinson
• Pinebook Pro keyboard (RK3399 OHCI)?   Peter Robinson
• Pinebook Pro keyboard (RK3399 OHCI)?   Peter Robinson
• Initial support for the Pine64 Pinephone   Peter Robinson
• [PATCH 1/8] dt-bindings: clk: sync sun50i-a64-ccu.h to linux 5.8-rc1   Peter Robinson
• [PATCH 2/8] dt-bindings: leds: sync leds common.h to linux from 5.8-rc1   Peter Robinson
• [PATCH 3/8] dt-bindings: clk/reset: sync updated bindings for Allwinner DE2 display engine   Peter Robinson
• [PATCH 4/8] arm: dts: sync axp803.dtsi from linux 5.8-rc1   Peter Robinson
• [PATCH 5/8] arm: dts: Add new sun50i-a64-cpu-opp.dtsi from Linux 5.8-rc1   Peter Robinson
• [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi from Linux 5.8-rc1   Peter Robinson
• [PATCH 7/8] arm64: dts: allwinner: Add initial support for Pine64 PinePhone   Peter Robinson
• [PATCH 8/8] Initial Pine64 Pinephone support   Peter Robinson
• [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi from Linux 5.8-rc1   Peter Robinson
• [PATCH 8/8] Initial Pine64 Pinephone support   Peter Robinson
• [PATCH v1 0/4]   Stefan Roese
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Stefan Roese
• [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Stefan Roese
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Stefan Roese
• PPC440EPx Evaluation Board Schematic   Stefan Roese
• [PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Stefan Roese
• [PATCH 1/1] mvpp2: fix second cp110 initialization   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 1/4] mips: start.S: remove dead code   Stefan Roese
• [PATCH 2/4] mips: add KSEG1 wrapper for change_k0_cca   Stefan Roese
• [PATCH 3/4] mips: refactor disabling of caches   Stefan Roese
• [PATCH 4/4] mips: add config options for generic cache setup code   Stefan Roese
• [PATCH 1/4] mips: remove deprecated UNCACHED_SDRAM() macro   Stefan Roese
• [PATCH 2/4] mips: sync asm/asm.h with Linux 5.7   Stefan Roese
• [PATCH 3/4] mips: sync asm/addrspace.h with Linux 5.7   Stefan Roese
• [PATCH 4/4] mips: sync asm/mipsregs.h with Linux 5.7   Stefan Roese
• [PATCH v2 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite   Stefan Roese
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v1] include: pci_ids: Add Cavium devices   Stefan Roese
• [PATCH v4 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Stefan Roese
• [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Stefan Roese
• [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Stefan Roese
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Stefan Roese
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Stefan Roese
• [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Stefan Roese
• [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support   Stefan Roese
• [PATCH v2 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)   Stefan Roese
• [PATCH v2 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()   Stefan Roese
• [PATCH v2 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped   Stefan Roese
• [PATCH v2 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms   Stefan Roese
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Stefan Roese
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v1 0/6] mips: octeon: Misc Octeon drivers, DT and Kconfig / defconfig updates   Stefan Roese
• [PATCH v1 1/6] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v1 2/6] mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes   Stefan Roese
• [PATCH v1 3/6] mips: octeon: dts: Add I2C DT nodes   Stefan Roese
• [PATCH v1 4/6] clk: clk_octeon: Add simple MIPS Octeon clock driver   Stefan Roese
• [PATCH v1 5/6] mips: octeon: dts: Add Octeon clock driver DT nodes   Stefan Roese
• [PATCH v1 6/6] mips: octeon: Update Octeon Kconfig and EBB7304 defconfig   Stefan Roese
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v2 00/10] mips: octeon: Misc Octeon drivers, DT and Kconfig / defconfig updates   Stefan Roese
• [PATCH v2 01/10] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v2 02/10] mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes   Stefan Roese
• [PATCH v2 03/10] mips: octeon: dts: Add I2C DT nodes   Stefan Roese
• [PATCH v2 04/10] clk: clk_octeon: Add simple MIPS Octeon clock driver   Stefan Roese
• [PATCH v2 05/10] mips: octeon: dts: Add Octeon clock driver DT nodes   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 07/10] mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT node   Stefan Roese
• [PATCH v2 08/10] mips: octeon: mrvl, octeon-ebb7304.dts: Add SPI flash DT node   Stefan Roese
• [PATCH v2 09/10] mips: octeon: Update Octeon Kconfig   Stefan Roese
• [PATCH v2 10/10] mips: octeon: Update EBB7304 defconfig   Stefan Roese
• [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support   Stefan Roese
• [PATCH v1 00/24] arm: Introduce Marvell/Cavium OcteonTX/TX2   Stefan Roese
• [PATCH v1 01/24] fdtdec: Add API to read pci bus-range property   Stefan Roese
• [PATCH v1 02/24] pci: pci-uclass: Remove #ifdef CONFIG_NR_DRAM_BANKS as its always set   Stefan Roese
• [PATCH v1 03/24] pci: pci-uclass: Dynamically allocate the PCI regions   Stefan Roese
• [PATCH v1 04/24] pci: pci-uclass: Fix incorrect argument in map_sysmem   Stefan Roese
• [PATCH v1 05/24] pci: pci-uclass: Make DT subnode parse optional   Stefan Roese
• [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
• [PATCH v1 07/24] pci: pci-uclass: Add support for Enhanced Allocation in Bridges   Stefan Roese
• [PATCH v1 08/24] pci: pci-uclass: Add support for Single-Root I/O Virtualization   Stefan Roese
• [PATCH v1 09/24] pci: pci-uclass: Add VF BAR map support for Enhanced Allocation   Stefan Roese
• [PATCH v1 10/24] pci: pci-uclass: Add support for Alternate-RoutingID capability   Stefan Roese
• [PATCH v1 11/24] pci: pci-uclass: Check validity of ofnode   Stefan Roese
• [PATCH v1 12/24] arm: include/asm/io.h: Add 64bit clrbits and setbits helpers   Stefan Roese
• [PATCH v1 13/24] arm: octeontx: Add headers for OcteonTX   Stefan Roese
• [PATCH v1 14/24] arm: octeontx2: Add headers for OcteonTX2   Stefan Roese
• [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Stefan Roese
• [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2   Stefan Roese
• [PATCH v1 17/24] mmc: Remove static qualifier on mmc_power_init   Stefan Roese
• [PATCH v1 18/24] mmc: Add MMC controller driver for OcteonTX / TX2   Stefan Roese
• [PATCH v1 19/24] mtd: nand: Add NAND controller driver for OcteonTX   Stefan Roese
• [PATCH v1 20/24] net: Add NIC controller driver for OcteonTX   Stefan Roese
• [PATCH v1 21/24] net: Add NIC controller driver for OcteonTX2   Stefan Roese
• [PATCH v1 22/24] watchdog: Add reset support for OcteonTX / TX2   Stefan Roese
• [PATCH v1 23/24] arm: octeontx: Add support for OcteonTX SoC platforms   Stefan Roese
• [PATCH v1 24/24] arm: octeontx2: Add support for OcteonTX2 SoC platforms   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH] mvebu: bubt: Drop dead code   Stefan Roese
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support   Stefan Roese
• [PATCH] mvebu: bubt: Drop dead code   Stefan Roese
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output   Stefan Roese
• [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 00/10] mips: octeon: Misc Octeon drivers, DT and Kconfig / defconfig updates   Stefan Roese
• [PATCH v2 01/10] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v2 02/10] mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes   Stefan Roese
• [PATCH v2 03/10] mips: octeon: dts: Add I2C DT nodes   Stefan Roese
• [PATCH v2 04/10] clk: clk_octeon: Add simple MIPS Octeon clock driver   Stefan Roese
• [PATCH v2 05/10] mips: octeon: dts: Add Octeon clock driver DT nodes   Stefan Roese
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 07/10] mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT node   Stefan Roese
• [PATCH v2 08/10] mips: octeon: mrvl, octeon-ebb7304.dts: Add SPI flash DT node   Stefan Roese
• [PATCH v2 09/10] mips: octeon: Update Octeon Kconfig   Stefan Roese
• [PATCH v2 10/10] mips: octeon: Update EBB7304 defconfig   Stefan Roese
• [PATCH 1/1] dm: fix ofnode_read_addr/size_cells()   Stefan Roese
• [PATCH v1 01/24] fdtdec: Add API to read pci bus-range property   Stefan Roese
• [PATCH v1 03/24] pci: pci-uclass: Dynamically allocate the PCI regions   Stefan Roese
• [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
• [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Stefan Roese
• [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2   Stefan Roese
• [PATCH v1 13/24] arm: octeontx: Add headers for OcteonTX   Stefan Roese
• [PATCH v1 14/24] arm: octeontx2: Add headers for OcteonTX2   Stefan Roese
• [PATCH v1 22/24] watchdog: Add reset support for OcteonTX / TX2   Stefan Roese
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Pali Rohár
• [PATCH] mmc: omap_hsmmc: Set 3.3V for IO voltage on all places   Pali Rohár
• [PATCH] serial: meson: handle RX errors   guillaume La Roque
• [PATCH 3/3] cmd: adtimg: Refactor usage style   Eugeniu Rosca
• [PATCH] board: Add support for iMX8QXP AI_ML board   Manivannan Sadhasivam
• [PATCH] mmc: msm_sdhci: Use mmc_of_parse for setting host_caps   Manivannan Sadhasivam
• [PATCH v2] board: Add support for iMX8QXP AI_ML board   Manivannan Sadhasivam
• [PATCH] tools/imximage: fix DCD Blocks message output order   Matthias Schiffer
• [PATCH v5 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Heiko Schocher
• [PATCH v3 04/14] i2c: add nexell driver   Heiko Schocher
• [PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging   Heiko Schocher
• [PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation   Heiko Schocher
• [PATCH v1 27/43] i2c: Add log_ret() on error   Heiko Schocher
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Heiko Schocher
• [PATCH v3 00/10] new rtc methods, rtc command, and tests   Heiko Schocher
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH v4 00/11] new rtc methods, rtc command, and tests   Heiko Schocher
• [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Heiko Schocher
• [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Heiko Schocher
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH v2 1/2] pwm: Add DT documentation for SiFive PWM Controller   Heiko Schocher
• [PATCH v2 2/2] pwm: Add PWM driver for SiFive SoC   Heiko Schocher
• [PATCH] imx6: aristainetos: sync defconfig with 2020.10   Heiko Schocher
• 'next' now merged to 'master'   Heiko Schocher
• [PATCH] gpio: fix test.py for gpio label lookup   Heiko Schocher
• [PATCH v2 1/2] pwm: Add DT documentation for SiFive PWM Controller   Heiko Schocher
• [PATCH v2 2/2] pwm: Add PWM driver for SiFive SoC   Heiko Schocher
• [PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon   Heiko Schocher
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH v9 2/2] board: presidio-asic: Add I2C support   Heiko Schocher
• [PATCH] i2c: imx_lpi2c: Improve the codes to use private data   Heiko Schocher
• [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Heiko Schocher
• [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Heiko Schocher
• [PATCH v4 01/11] rtc: add dm_rtc_read helper and ->read method   Heiko Schocher
• [PATCH v4 02/11] rtc: add dm_rtc_write() helper   Heiko Schocher
• [PATCH v4 03/11] rtc: fall back to ->{read,write} if ->{read,write}8 are not provided   Heiko Schocher
• [PATCH v4 04/11] rtc: pcf2127: provide ->read method   Heiko Schocher
• [PATCH v4 05/11] rtc: pcf2127: provide ->write method   Heiko Schocher
• [PATCH v4 06/11] rtc: add rtc command   Heiko Schocher
• [PATCH v4 07/11] rtc: sandbox-rtc: fix set method   Heiko Schocher
• [PATCH v4 08/11] rtc: i2c_rtc_emul: catch any write to the "reset" register   Heiko Schocher
• [PATCH v4 09/11] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write   Heiko Schocher
• [PATCH v4 10/11] sandbox: add rtc command to defconfigs   Heiko Schocher
• [PATCH v4 11/11] test: dm: rtc: add tests of rtc shell command   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• Using gerrit or github for review?   Heiko Schocher
• Using gerrit or github for review?   Heiko Schocher
• Using gerrit or github for review?   Heiko Schocher
• Using gerrit or github for review?   Heiko Schocher
• [PATCH] mtd: mtdpart: use uint64_t instead of int for cur_off   Heiko Schocher
• [PATCH v6 3/3] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
• [PATCH] gpio: Add support for gpio-line-names reading   Heiko Schocher
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Heiko Schocher
• [PATCH] sandbox, test: change hog gpio   Heiko Schocher
• [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output   Heiko Schocher
• [PATCH 1/1] efi_loader: add missing validation of timestamp   Heinrich Schuchardt
• [PATCH 0/2] efi_loader: fix efi_image_region_add()   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: fix efi_image_region_add()   Heinrich Schuchardt
• [PATCH 2/2] test: provide tests for efi_image_region_add()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: time based authentication   Heinrich Schuchardt
• [PATCH 09/17] lib: sscanf: add sscanf implementation   Heinrich Schuchardt
• [PATCH 08/17] linux/compat.h: Add wait_event_timeout macro   Heinrich Schuchardt
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Heinrich Schuchardt
• [PATCH 12/17] xen: pvblock: Add initial support for para-virtualized block driver   Heinrich Schuchardt
• [PATCH 10/17] xen: Port Xen bus driver from mini-os   Heinrich Schuchardt
• [PATCH 1/1] test: correct time stamps for UEFI authentication   Heinrich Schuchardt
• [PATCH 03/17] board: Introduce xenguest_arm64 board   Heinrich Schuchardt
• [PATCH 08/13] test/py: efi_secboot: remove all "re.search"   Heinrich Schuchardt
• [PATCH 09/13] test/py: efi_secboot: fix test case 1g of test_authvar   Heinrich Schuchardt
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   Heinrich Schuchardt
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Heinrich Schuchardt
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   Heinrich Schuchardt
• [PATCH v2 01/17] efi_loader: change efi objects initialization order   Heinrich Schuchardt
• [PATCH v2 02/17] Revert "test: stabilize test_efi_secboot"   Heinrich Schuchardt
• [PATCH v2 03/17] efi_loader: signature: replace debug to EFI_PRINT   Heinrich Schuchardt
• [PATCH v2 05/17] efi_loader: image_loader: replace debug to EFI_PRINT   Heinrich Schuchardt
• [PATCH v2 06/17] efi_loader: image_loader: add a check against certificate type of authenticode   Heinrich Schuchardt
• [PATCH v2 08/17] efi_loader: signature: fix a size check against revocation list   Heinrich Schuchardt
• [PATCH v2 09/17] efi_loader: signature: make efi_hash_regions more generic   Heinrich Schuchardt
• [PATCH v2 12/17] test/py: efi_secboot: remove all "re.search"   Heinrich Schuchardt
• [PATCH v2 13/17] test/py: efi_secboot: fix test case 1g of test_authvar   Heinrich Schuchardt
• [PATCH v2 14/17] test/py: efi_secboot: split "signed image" test case-1 into two cases   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1   Heinrich Schuchardt
• efi_loader: secure mode transitions, VendorKeys   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1   Heinrich Schuchardt
• [PATCH 1/2] test/py: efi_secboot: apply autopep8   Heinrich Schuchardt
• [PATCH 2/2] test/py: efi_secboot: more fixes against pylint   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: NULL dereference in efi_convert_pointer   Heinrich Schuchardt
• [PATCH v2 00/17] efi_loader: non-volatile and runtime variables   Heinrich Schuchardt
• [PATCH v2 01/17] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH v2 02/17] efi_loader: display RO attribute in printenv -e   Heinrich Schuchardt
• [PATCH v2 03/17] efi_loader: separate UEFI variable API from implemementation   Heinrich Schuchardt
• [PATCH v2 04/17] efi_loader: OsIndicationsSupported, PlatformLangCodes   Heinrich Schuchardt
• [PATCH v2 05/17] efi_loader: simplify boot manager   Heinrich Schuchardt
• [PATCH v2 06/17] efi_loader: keep attributes in efi_set_variable_int   Heinrich Schuchardt
• [PATCH v2 07/17] efi_loader: value of VendorKeys   Heinrich Schuchardt
• [PATCH v2 08/17] efi_loader: read-only AuditMode and DeployedMode   Heinrich Schuchardt
• [PATCH v2 09/17] efi_loader: secure boot flag   Heinrich Schuchardt
• [PATCH v2 10/17] efi_loader: UEFI variable persistence   Heinrich Schuchardt
• [PATCH v2 11/17] efi_loader: export efi_convert_pointer()   Heinrich Schuchardt
• [PATCH v2 12/17] efi_loader: optional pointer for ConvertPointer   Heinrich Schuchardt
• [PATCH v2 13/17] efi_loader: new function efi_memcpy_runtime()   Heinrich Schuchardt
• [PATCH v2 14/17] efi_loader: memory buffer for variables   Heinrich Schuchardt
• [PATCH v2 15/17] efi_loader: use memory based variable storage   Heinrich Schuchardt
• [PATCH v2 16/17] efi_loader: enable UEFI variables at runtime   Heinrich Schuchardt
• [PATCH v2 17/17] efi_selftest: adjust runtime test for variables   Heinrich Schuchardt
• [PATCH v2 3/8] lib: crypto: enable x509_check_for_self_signed()   Heinrich Schuchardt
• [PATCH v2 2/8] lib: crypto: add public_key_verify_signature()   Heinrich Schuchardt
• [PATCH v2 1/8] lib: rsa: export rsa_verify_with_pkey()   Heinrich Schuchardt
• [PATCH v2 4/8] lib: crypto: import pkcs7_verify.c from linux   Heinrich Schuchardt
• [PATCH v2 6/8] lib: crypto: export and enhance pkcs7_verify_one()   Heinrich Schuchardt
• [PATCH v2 7/8] efi_loader: signature: rework for intermediate certificates support   Heinrich Schuchardt
• [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   Heinrich Schuchardt
• [PATCH v3 3/5] arm: qemu: implement enable_caches()   Heinrich Schuchardt
• [PATCH v2 16/17] efi_loader: enable UEFI variables at runtime   Heinrich Schuchardt
• [PATCH v6 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heinrich Schuchardt
• [PATCH] efi_loader: cleanup for tee backed variables   Heinrich Schuchardt
• [PATCH v7 1/1] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heinrich Schuchardt
• [PATCH 1/1] lib/crypto: use qualified path for x509_parser.h   Heinrich Schuchardt
• [PATCH v3 01/13] lib/crypto, efi_loader: avoid multiple inclusions of header files   Heinrich Schuchardt
• [PATCH v3 00/17] efi_loader: non-volatile and runtime variables   Heinrich Schuchardt
• [PATCH v3 01/17] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH v3 02/17] efi_loader: display RO attribute in printenv -e   Heinrich Schuchardt
• [PATCH v3 03/17] efi_loader: separate UEFI variable API from implemementation   Heinrich Schuchardt
• [PATCH v3 04/17] efi_loader: OsIndicationsSupported, PlatformLangCodes   Heinrich Schuchardt
• [PATCH v3 05/17] efi_loader: simplify boot manager   Heinrich Schuchardt
• [PATCH v3 06/17] efi_loader: keep attributes in efi_set_variable_int   Heinrich Schuchardt
• [PATCH v3 07/17] efi_loader: value of VendorKeys   Heinrich Schuchardt
• [PATCH v3 08/17] efi_loader: read-only AuditMode and DeployedMode   Heinrich Schuchardt
• [PATCH v3 09/17] efi_loader: secure boot flag   Heinrich Schuchardt
• [PATCH v3 10/17] efi_loader: UEFI variable persistence   Heinrich Schuchardt
• [PATCH v3 11/17] efi_loader: export efi_convert_pointer()   Heinrich Schuchardt
• [PATCH v3 12/17] efi_loader: optional pointer for ConvertPointer   Heinrich Schuchardt
• [PATCH v3 13/17] efi_loader: new function efi_memcpy_runtime()   Heinrich Schuchardt
• [PATCH v3 14/17] efi_loader: memory buffer for variables   Heinrich Schuchardt
• [PATCH v3 15/17] efi_loader: use memory based variable storage   Heinrich Schuchardt
• [PATCH v3 16/17] efi_loader: enable UEFI variables at runtime   Heinrich Schuchardt
• [PATCH v3 17/17] efi_selftest: adjust runtime test for variables   Heinrich Schuchardt
• [PATCH v3 00/13] efi_loader: rework/improve UEFI secure boot code   Heinrich Schuchardt
• [PATCH 1/1] doc: correct description of crash dumps   Heinrich Schuchardt
• [PATCH 05/10] board_f: mips: Factor out mips-specific bdinfo setup   Heinrich Schuchardt
• [PATCH 05/10] board_f: mips: Factor out mips-specific bdinfo setup   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Heinrich Schuchardt
• [PATCH v3 1/1] cmd: blkls: Add blkls command   Heinrich Schuchardt
• [PATCH v3 02/17] dfu: add a hidden reverse-dependency on UPDATE_TFTP   Heinrich Schuchardt
• [PATCH v3 01/17] common: update_tftp: remove unnecessary build check   Heinrich Schuchardt
• [PATCH v3 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Heinrich Schuchardt
• [PATCH v3 04/17] common: update: add a generic interface for FIT image   Heinrich Schuchardt
• [PATCH v3 05/17] dfu: export dfu_list   Heinrich Schuchardt
• [PATCH v3 06/17] efi_loader: add option to initialise EFI subsystem early   Heinrich Schuchardt
• [PATCH v2 1/1] CI: show skipped Python tests   Heinrich Schuchardt
• [PATCH v3 13/13] test/py: efi_secboot: add a test for verifying with digest of signed image   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Heinrich Schuchardt
• [PATCH v4 00/12] efi_loader: rework/improve UEFI secure boot code   Heinrich Schuchardt
• [PATCH v4 01/12] efi_loader: image_loader: add a check against certificate type of authenticode   Heinrich Schuchardt
• [PATCH v4 02/12] efi_loader: image_loader: retrieve authenticode only if it exists   Heinrich Schuchardt
• [PATCH v4 03/12] efi_loader: signature: fix a size check against revocation list   Heinrich Schuchardt
• [PATCH v4 04/12] efi_loader: signature: make efi_hash_regions more generic   Heinrich Schuchardt
• [PATCH v4 05/12] efi_loader: image_loader: verification for all signatures should pass   Heinrich Schuchardt
• [PATCH v4 06/12] efi_loader: image_loader: add digest-based verification for signed image   Heinrich Schuchardt
• [PATCH v4 07/12] test/py: efi_secboot: apply autopep8   Heinrich Schuchardt
• [PATCH v4 08/12] test/py: efi_secboot: more fixes against pylint   Heinrich Schuchardt
• [PATCH v4 09/12] test/py: efi_secboot: split "signed image" test case-1 into two cases   Heinrich Schuchardt
• [PATCH v4 10/12] test/py: efi_secboot: add a test against certificate revocation   Heinrich Schuchardt
• [PATCH v4 11/12] test/py: efi_secboot: add a test for multiple signatures   Heinrich Schuchardt
• [PATCH v4 12/12] test/py: efi_secboot: add a test for verifying with digest of signed image   Heinrich Schuchardt
• [PATCH v4 00/17] efi_loader: non-volatile and runtime variables   Heinrich Schuchardt
• [PATCH v4 01/17] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH v4 02/17] efi_loader: display RO attribute in printenv -e   Heinrich Schuchardt
• [PATCH v4 03/17] efi_loader: separate UEFI variable API from implemementation   Heinrich Schuchardt
• [PATCH v4 04/17] efi_loader: OsIndicationsSupported, PlatformLangCodes   Heinrich Schuchardt
• [PATCH v4 05/17] efi_loader: simplify boot manager   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Heinrich Schuchardt
• [PATCH v4 06/17] efi_loader: keep attributes in efi_set_variable_int   Heinrich Schuchardt
• [PATCH v4 07/17] efi_loader: value of VendorKeys   Heinrich Schuchardt
• [PATCH v4 08/17] efi_loader: read-only AuditMode and DeployedMode   Heinrich Schuchardt
• [PATCH v4 09/17] efi_loader: secure boot flag   Heinrich Schuchardt
• [PATCH v4 10/17] efi_loader: UEFI variable persistence   Heinrich Schuchardt
• [PATCH v4 11/17] efi_loader: export efi_convert_pointer()   Heinrich Schuchardt
• [PATCH v4 12/17] efi_loader: optional pointer for ConvertPointer   Heinrich Schuchardt
• [PATCH v4 13/17] efi_loader: new function efi_memcpy_runtime()   Heinrich Schuchardt
• [PATCH v4 14/17] efi_loader: memory buffer for variables   Heinrich Schuchardt
• [PATCH v4 15/17] efi_loader: use memory based variable storage   Heinrich Schuchardt
• [PATCH v4 16/17] efi_loader: enable UEFI variables at runtime   Heinrich Schuchardt
• [PATCH v4 17/17] efi_selftest: adjust runtime test for variables   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   Heinrich Schuchardt
• [PATCH 1/1] .gitlab-ci.yml: copy GRUB to correct build path   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: skip warnings for network configuration   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (3)   Heinrich Schuchardt
• [PATCH 1/1] .gitlab-ci.yml: copy GRUB to correct build path   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: compile QEMU for Nokia N900 emulation   Heinrich Schuchardt
• Using gerrit or github for review?   Heinrich Schuchardt
• [PATCH 1/1] cmd: fix lsblk command   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: compile QEMU for Nokia N900 emulation   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: provide kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH] test: use virt-make-fs to build image   Heinrich Schuchardt
• [PATCH v2 1/1] .gitlab-ci.yml: copy GRUB to correct build path   Heinrich Schuchardt
• [PATCH 1/1] Azure: copy GRUB to correct build path   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: provide kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH] test: use virt-make-fs to build image   Heinrich Schuchardt
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Heinrich Schuchardt
• Using gerrit or github for review?   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: restructure code for TEE variables   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: update secure state   Heinrich Schuchardt
• [PATCH 1/1] doc: provide links to Microsoft UEFI certificates   Heinrich Schuchardt
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: update secure state   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: configuration of variables store   Heinrich Schuchardt
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH v3 04/17] common: update: add a generic interface for FIT image   Heinrich Schuchardt
• uboot-test-hooks: dfu-util   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify 'printenv -e'   Heinrich Schuchardt
• uboot-test-hooks: dfu-util   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: pre-seed UEFI variables   Heinrich Schuchardt
• [PATCH for v2020.10 1/1] cmd: drop fitupd command   Heinrich Schuchardt
• uboot-test-hooks: dfu-util   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: describe EFI_VAR_FILE_MAGIC   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: pre-seed UEFI variables   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (4)   Heinrich Schuchardt
• [PATCH] memsize: Make get_ram_size() work with arbitary RAM size   Heinrich Schuchardt
• [PATCH 1/1] test/dm: check if devices exist   Heinrich Schuchardt
• [PATCH] efi_loader: Correct value for ARM_SMC_MM_RET_NO_MEMORY   Heinrich Schuchardt
• [PATCH] test/py: efi_secboot: fix Test Case 6c   Heinrich Schuchardt
• [PATCH v4 6/7] efi_loader: signature: rework for intermediate certificates support   Heinrich Schuchardt
• [PATCH v4 7/7] test/py: efi_secboot: add test for intermediate certificates   Heinrich Schuchardt
• [PATCH v2] efi_loader: Rename and correct values for ARM_SMC_MM_*   Heinrich Schuchardt
• [PATCH 1/1] dfu: fix typo parameteres   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: use logging for bootefi command   Heinrich Schuchardt
• [PATCH] efi_loader: use logging for block device messages   Heinrich Schuchardt
• [PATCH 1/1] clk: ICS8N3QV01 remove superfluous code   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: document efi_save_gd(), efi_restore_gd()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: returning form UEFI FIT images   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: use logging for bootefi command   Heinrich Schuchardt
• [PATCH v4 1/7] lib: crypto: add public_key_verify_signature()   Heinrich Schuchardt
• [PATCH v4 3/7] lib: crypto: import pkcs7_verify.c from linux   Heinrich Schuchardt
• [PATCH v2 1/1] Dockerfile: provide kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH v4 7/7] test/py: efi_secboot: add test for intermediate certificates   Heinrich Schuchardt
• ofnode_read_size_cells() returns wrong size   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Heinrich Schuchardt
• [RFC] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read   Heinrich Schuchardt
• [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
• [PATCH 1/1] dfu: simplify DFU_TFTP configuration   Heinrich Schuchardt
• [PATCH 1/1] dfu: DFU_MTD depends on CMD_MTDPARTS   Heinrich Schuchardt
• [PATCH 1/1] configs: qemu: enable dfu testing   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Heinrich Schuchardt
• [PATCH] efi_loader: Check for the native OP-TEE result on mm_communicate calls   Heinrich Schuchardt
• [PATCH v2] efi_loader: loosen buffer parameter check in efi_file_read   Heinrich Schuchardt
• [PATCH v5 6/8] efi_loader: signature: rework for intermediate certificates support   Heinrich Schuchardt
• [PATCH v4 02/16] dfu: modify an argument type for an address   Heinrich Schuchardt
• [PATCH v4 03/16] common: update: add a generic interface for FIT image   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc1 (5)   Heinrich Schuchardt
• [PATCH 1/1] dfu: fix dfu tftp on sandbox   Heinrich Schuchardt
• [PATCH v4 02/16] dfu: modify an argument type for an address   Heinrich Schuchardt
• [PATCH] Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabled   Heinrich Schuchardt
• [PATCH] efi_loader: Trim output buffer size correctly for tee variables   Heinrich Schuchardt
• Reproducibility regression with mx6cuboxi   Heinrich Schuchardt
• U-Boot Tests for ARM Architecture   Heinrich Schuchardt
• [PATCH] efi_loader: Enable run-time variable support for tee based variables   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: efi_current_var after SetVirtualAddressMap   Heinrich Schuchardt
• Debian boot failure with UEFI runtime variables enabled   Heinrich Schuchardt
• Debian boot failure with UEFI runtime variables enabled   Heinrich Schuchardt
• [PATCH v4 07/16] efi_loader: capsule: add capsule_on_disk support   Heinrich Schuchardt
• [PATCH v4 06/16] efi_loader: define UpdateCapsule api   Heinrich Schuchardt
• [PATCH v2] efi_loader: Enable run-time variable support for tee based variables   Heinrich Schuchardt
• [PATCH] cmd: host: return value of do_host_bind()   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: read device tree correctly   Heinrich Schuchardt
• [PATCH v2 1/1] mtd: cfi_flash: read device tree correctly   Heinrich Schuchardt
• [PATCH 1/1] dm: remove superfluous comment for union ofnode_union   Heinrich Schuchardt
• [PATCH 1/1] test: do not rely on => being the prompt   Heinrich Schuchardt
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] doc: move Clang documentation to HTML   Heinrich Schuchardt
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Heinrich Schuchardt
• [PATCH 1/9] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Heinrich Schuchardt
• [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] dm: fix ofnode_read_addr/size_cells()   Heinrich Schuchardt
• [PATCH] log: Allow LOG_DEBUG to always enable log output   Heinrich Schuchardt
• [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi from Linux 5.8-rc1   Heinrich Schuchardt
• [PATCH 1/1] doc: qemu-mips build instructions   Heinrich Schuchardt
• Kendryte build warnings   Heinrich Schuchardt
• Kendryte build warnings   Heinrich Schuchardt
• Kendryte build warnings   Heinrich Schuchardt
• [PATCH 1/1] doc: riscv: Update documentation for Sipeed MAIX boards   Heinrich Schuchardt
• [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Heinrich Schuchardt
• [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output   Heinrich Schuchardt
• [PATCH 1/1] timer: dw-apb: fix compiler warnings   Heinrich Schuchardt
• [PATCH v2 1/1] doc: riscv: Update documentation for Sipeed MAIX boards   Heinrich Schuchardt
• [PATCH v4 00/16] efi_loader: add capsule update support   Heinrich Schuchardt
• [PATCH 0/6] efi_selftest: allow UEFI testing on MAIX   Heinrich Schuchardt
• [PATCH 1/6] efi_loader: use CONFIG_STACK_SIZE in the UEFI sub-system   Heinrich Schuchardt
• [PATCH 2/6] configs: reduce stack size of Sipeed MAIX   Heinrich Schuchardt
• [PATCH 3/6] riscv: load addresses for Sipeed MAIX   Heinrich Schuchardt
• [PATCH 4/6] dm: sysreset: wait after reset message   Heinrich Schuchardt
• [PATCH 5/6] efi_selftest: SNP test depends on network   Heinrich Schuchardt
• [PATCH 6/6] efi_selftest: block device test requires CONFIG_DOS_PARTITION   Heinrich Schuchardt
• [PATCH 1/1] x86: rename CONFIG_STACK_SIZE   Heinrich Schuchardt
• [PATCH 0/6] efi_selftest: allow UEFI testing on MAIX   Heinrich Schuchardt
• [PATCH 1/1] doc: riscv: debug UART for MAIX   Heinrich Schuchardt
• [PATCH] riscv: additional crash information   Heinrich Schuchardt
• [PATCH] efi_loader: add copyright notice   Heinrich Schuchardt
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Heinrich Schuchardt
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Heinrich Schuchardt
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Heinrich Schuchardt
• efi_loader/RISC-V: misaligned load when running grubriscv64.efi   Heinrich Schuchardt
• [PATCH v2 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite   Daniel Schwierzeck
• [PATCH 0/4] MIPS: refactor and cleanup start.S (part 1)   Daniel Schwierzeck
• [PATCH 1/4] mips: start.S: remove dead code   Daniel Schwierzeck
• [PATCH 2/4] mips: add KSEG1 wrapper for change_k0_cca   Daniel Schwierzeck
• [PATCH 3/4] mips: refactor disabling of caches   Daniel Schwierzeck
• [PATCH 4/4] mips: add config options for generic cache setup code   Daniel Schwierzeck
• [PATCH 0/4] MIPS: sync asm header files with Linux 5.7 (part 1)   Daniel Schwierzeck
• [PATCH 1/4] mips: remove deprecated UNCACHED_SDRAM() macro   Daniel Schwierzeck
• [PATCH 2/4] mips: sync asm/asm.h with Linux 5.7   Daniel Schwierzeck
• [PATCH 3/4] mips: sync asm/addrspace.h with Linux 5.7   Daniel Schwierzeck
• [PATCH 4/4] mips: sync asm/mipsregs.h with Linux 5.7   Daniel Schwierzeck
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Daniel Schwierzeck
• [PATCH v4 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Daniel Schwierzeck
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Daniel Schwierzeck
• [PULL] u-boot-mips   Daniel Schwierzeck
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Daniel Schwierzeck
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Daniel Schwierzeck
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Daniel Schwierzeck
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Daniel Schwierzeck
• [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
• [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support   Daniel Schwierzeck
• [PATCH v2 0/2] Add support for PWM SiFive   Yash Shah
• [PATCH v1 1/2] x86: sipi_vector: Append appropriate suffixes   Andy Shevchenko
• [PATCH v1 2/2] x86: call32: Append appropriate suffixes   Andy Shevchenko
• U-boot Designware SPI driver issue   Yakov Shmulevich
• [PATCH v5 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Baruch Siach
• [PATCH] cmd: bootz: fix device-tree overlap test   Baruch Siach
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH] versal: fix versal PM ret payload size   Michal Simek
• [PATCH] lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()   Michal Simek
• [PATCH] serial: Fix SIFIVE debug serial dependency   Michal Simek
• [PATCH] serial: Fix SIFIVE debug serial dependency   Michal Simek
• [PATCH v2] serial: Fix SIFIVE debug serial dependency   Michal Simek
• [PATCH 0/3] lib: fdt: Remove two functions from fdtdec.c   Michal Simek
• [PATCH 1/3] ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt()   Michal Simek
• [PATCH 2/3] Revert "lib: fdt: Split fdtdec_setup_memory_banksize()"   Michal Simek
• [PATCH 3/3] Revert "lib: fdt: Split fdtdec_setup_mem_size_base()"   Michal Simek
• [PATCH] xilinx: Setup bootm variables   Michal Simek
• [PATCH v2 0/3] xilinx: Enable Versal allocation from low memory   Michal Simek
• [PATCH v2 1/3] lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()   Michal Simek
• [PATCH v2 2/3] lib: fdt: Convert fdtdes_setup_mem..() to livetree API   Michal Simek
• [PATCH v2 3/3] xilinx: versal: Use lowest memory for U-Boot   Michal Simek
• Using gerrit or github for review?   Michal Simek
• [PATCH] serial: Fix SIFIVE debug serial dependency   Michal Simek
• [RFC PATCH 00/16] RFC: patman: Collect review tags and comments from Patchwork   Michal Simek
• [PATCH] doc: fit: Write hex address as hex instead of int   Michal Simek
• [PATCH 1/2] xilinx: Align dfu ram with booti command   Michal Simek
• [PATCH 2/2] xilinx: zynqmp: Enable DFU tftp support   Michal Simek
• [RFC] dfu: remove UPDATE_TFTP   Michal Simek
• [RFC] dfu: remove UPDATE_TFTP   Michal Simek
• [PATCH] arm64: zynqmp: Reduce malloc memory for mini QSPI configuration   Michal Simek
• [PATCH v6 3/3] gpio: search for gpio label if gpio is not found through bank name   Michal Simek
• [RFC] dfu: remove UPDATE_TFTP   Michal Simek
• [PATCH] gpio: Add support for gpio-line-names reading   Michal Simek
• [PATCH] xilinx: Enable GPIO lookup label   Michal Simek
• [PATCH v6 3/3] gpio: search for gpio label if gpio is not found through bank name   Michal Simek
• [PATCH] serial: Fix incorrect dependency for debug sifive serial driver   Michal Simek
• [PATCH v3] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH v2] arm64: zynqmp: Define eeprom fixed partitions in DT   Michal Simek
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH] dt-bindings: Sync include/dt-bindings/phy/phy.h from Linux   Michal Simek
• [PATCH] Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabled   Michal Simek
• [PATCH] pinctrl: aspeed: Fix Kconfig entry indentation   Michal Simek
• [PATCH] xilinx: Fix xlnx,mio_bank property   Michal Simek
• [PATCH] mmc: zynq: Fix default value for xlnx,mio-bank   Michal Simek
• [PATCH] arm64: zynqmp: Fix zynqmp mini qspi max frequency   Michal Simek
• [PATCH] xilinx: Setup bootm variables   Michal Simek
• [PATCH] arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB   Michal Simek
• [PATCH v2] xilinx: versal: Add new versal loadpdi command   Michal Simek
• [PATCH] versal: fix versal PM ret payload size   Michal Simek
• [PATCH v2 0/3] xilinx: Enable Versal allocation from low memory   Michal Simek
• [PATCH] arm64: zynqmp: Reduce malloc memory for mini QSPI configuration   Michal Simek
• [PATCH 1/2] xilinx: Align dfu ram with booti command   Michal Simek
• [PATCH 2/2] xilinx: zynqmp: Enable DFU tftp support   Michal Simek
• [PATCH] clk: versal: Move pm_query_id out of clock driver   Michal Simek
• [PATCH] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Michal Simek
• Please pull u-boot-dm   Michal Simek
• [PATCH] mmc: sdhci: Use upper/lower_32_bits macros   Michal Simek
• [PATCH] mmc: sdhci: Setup HS modes based on HISPD bit   Michal Simek
• [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit   Michal Simek
• [PATCH] mmc: sdhci: Setup HS modes based on HISPD bit   Michal Simek
• [PATCH] xilinx: zynqmp: Add support for saving variables   Michal Simek
• [PATCH] configs: ls1012a/ls1046a: Define CONFIG_ENV_OVERWRITE   Kuldeep Singh
• [PATCH] configs: ls1012a/ls1046a: Define CONFIG_ENV_OVERWRITE   Kuldeep Singh
• [PATCH] configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NOR   Kuldeep Singh
• [PATCH] configs: ls1043aqds: Configure QSPI related configs   Kuldeep Singh
• [Patch v2] configs: ls1012a/ls1046a: Add CONFIG_ENV_OVERWRITE in defconfig   Kuldeep Singh
• [PATCH v3] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH v4] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH v5] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Jonas Smedegaard
• [PATCH v4 2/2] sun50i: a64: A64-Teres-I board detect builtin keyboard   Jonas Smedegaard
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Jonas Smedegaard
• [PATCH v4 2/2] sun50i: a64: A64-Teres-I board detect builtin keyboard   Jonas Smedegaard
• [PATCH v2 1/3] armv8: gpio: add gpio feature   Hui Song
• [PATCH v2 2/3] dm: armv8: gpio: include <asm/arch/gpio.h> for fsl-layerscape   Hui Song
• [PATCH v2 3/3] gpio: mpc8xxx: support fsl-layerscape platform.   Hui Song
• Pinebook Pro keyboard (RK3399 OHCI)?   Simon South
• Pinebook Pro keyboard (RK3399 OHCI)?   Simon South
• Pinebook Pro keyboard (RK3399 OHCI)?   Simon South
• Pinebook Pro keyboard (RK3399 OHCI)?   Simon South
• Secondary UART   Ralf Spiwoks
• [PATCH 0/6] TI: AM654/j721e: Ringacc and UDMA updates   Grygorii Strashko
• [PATCH 4/5] arm: dts: k3-j721e: Sync CPSW DT node from kernel   Grygorii Strashko
• [PATCH 0/5] TI: AM654/J721e: Sync CPSW DT node from kernel   Grygorii Strashko
• [PATCH v2 0/9] Introduce UCLASS_SOC   Grygorii Strashko
• [PATCH 07/18] arm: mach-k3: j721e: Add detection for j721e   Grygorii Strashko
• [PATCH v4 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason   Roman Stratiienko
• [PATCH v4 3/3] fastboot: Add default fastboot_set_reboot_flag implementation   Roman Stratiienko
• [PATCH v4 2/3] fastboot: Add support for 'reboot fastboot' command   Roman Stratiienko
• [PATCH 1/3] rockchip: px30: sync the main rk3326 dtsi from mainline   Heiko Stuebner
• [PATCH 2/3] rockchip: px30: sync Odroid Go Advance devicetree from Linux   Heiko Stuebner
• [PATCH 3/3] rockchip: board: add Hardkernel Odroid Go2 board   Heiko Stuebner
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Flavio Suligoi
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Flavio Suligoi
• [PATCH v1] power: pmic: pca9450: fix i2c address for PCA9450A   Flavio Suligoi
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Flavio Suligoi
• [PATCH] power: pmic: pca9450: fix i2c address for PCA9450A   Sébastien Szymanski
• [PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read   Stefan Sørensen
• [PATCH v2] efi_loader: loosen buffer parameter check in efi_file_read   Stefan Sørensen
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   AKASHI Takahiro
• [PATCH v2 06/17] efi_loader: image_loader: add a check against certificate type of authenticode   AKASHI Takahiro
• [PATCH v2 08/17] efi_loader: signature: fix a size check against revocation list   AKASHI Takahiro
• [PATCH v2 09/17] efi_loader: signature: make efi_hash_regions more generic   AKASHI Takahiro
• [PATCH v2 08/17] efi_loader: signature: fix a size check against revocation list   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: more fixes against pylint   AKASHI Takahiro
• [PATCH 1/2] test/py: efi_secboot: apply autopep8   AKASHI Takahiro
• [PATCH v3 00/13] efi_loader: rework/improve UEFI secure boot code   AKASHI Takahiro
• [PATCH v3 01/13] lib/crypto, efi_loader: avoid multiple inclusions of header files   AKASHI Takahiro
• [PATCH v3 02/13] efi_loader: image_loader: add a check against certificate type of authenticode   AKASHI Takahiro
• [PATCH v3 03/13] efi_loader: image_loader: retrieve authenticode only if it exists   AKASHI Takahiro
• [PATCH v3 04/13] efi_loader: signature: fix a size check against revocation list   AKASHI Takahiro
• [PATCH v3 05/13] efi_loader: signature: make efi_hash_regions more generic   AKASHI Takahiro
• [PATCH v3 06/13] efi_loader: image_loader: verification for all signatures should pass   AKASHI Takahiro
• [PATCH v3 07/13] efi_loader: image_loader: add digest-based verification for signed image   AKASHI Takahiro
• [PATCH v3 08/13] test/py: efi_secboot: apply autopep8   AKASHI Takahiro
• [PATCH v3 09/13] test/py: efi_secboot: more fixes against pylint   AKASHI Takahiro
• [PATCH v3 10/13] test/py: efi_secboot: split "signed image" test case-1 into two cases   AKASHI Takahiro
• [PATCH v3 11/13] test/py: efi_secboot: add a test against certificate revocation   AKASHI Takahiro
• [PATCH v3 12/13] test/py: efi_secboot: add a test for multiple signatures   AKASHI Takahiro
• [PATCH v3 13/13] test/py: efi_secboot: add a test for verifying with digest of signed image   AKASHI Takahiro
• [PATCH v2 2/8] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v2 3/8] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCH v2 4/8] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH v2 6/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH v3 01/13] lib/crypto, efi_loader: avoid multiple inclusions of header files   AKASHI Takahiro
• using sudo?, Re: [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• using sudo?, Re: [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH v3 0/8] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH v3 1/8] lib: rsa: export rsa_verify_with_pkey()   AKASHI Takahiro
• [PATCH v3 2/8] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v3 3/8] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCH v3 4/8] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH v3 5/8] lib: crypto: add pkcs7_digest()   AKASHI Takahiro
• [PATCH v3 6/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH v3 7/8] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH v3 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH] test/py: efi_secboot: fix Test Case 6c   AKASHI Takahiro
• [PATCH v3 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v3 01/17] common: update_tftp: remove unnecessary build check   AKASHI Takahiro
• [PATCH v3 02/17] dfu: add a hidden reverse-dependency on UPDATE_TFTP   AKASHI Takahiro
• [PATCH v3 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v3 04/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v3 05/17] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v3 06/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v3 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v3 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v3 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [PATCH v3 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [PATCH v3 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v3 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [PATCH v3 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v3 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH v3 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [PATCH v3 16/17] test/py: add a test for uefi firmware update capsule of FIT image   AKASHI Takahiro
• [PATCH v3 17/17] test/py: add a test for uefi firmware update capsule of raw image   AKASHI Takahiro
• Pull request for UEFI sub-system for efi-2020-10-rc1 (2)   AKASHI Takahiro
• [PATCH v3 13/13] test/py: efi_secboot: add a test for verifying with digest of signed image   AKASHI Takahiro
• [PATCH] test: use virt-make-fs to build image   AKASHI Takahiro
• [PATCH] test: use virt-make-fs to build image   AKASHI Takahiro
• [PATCH v3 04/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v3 05/17] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v3 06/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v3 02/17] dfu: add a hidden reverse-dependency on UPDATE_TFTP   AKASHI Takahiro
• [PATCH v3 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v3 04/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH] test: use virt-make-fs to build image   AKASHI Takahiro
• [RFC] dfu: remove UPDATE_TFTP   AKASHI Takahiro
• [RFC] dfu: remove UPDATE_TFTP   AKASHI Takahiro
• [PATCH 1/1] efi_loader: pre-seed UEFI variables   AKASHI Takahiro
• [PATCH] test/py: efi_secboot: fix Test Case 6c   AKASHI Takahiro
• [PATCH v4 0/7] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH v4 1/7] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v4 2/7] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCH v4 3/7] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH v4 4/7] lib: crypto: add pkcs7_digest()   AKASHI Takahiro
• [PATCH v4 5/7] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH v4 6/7] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH v4 7/7] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH v4 1/7] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v4 7/7] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH v4 6/7] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH] test/py: efi_secboot: fix additional pylint errors   AKASHI Takahiro
• [PATCH] test/py: efi_secboot: remove unused function   AKASHI Takahiro
• [PATCH v4 7/7] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH] Dockerfile: update sbsigntools to v0.9.4   AKASHI Takahiro
• [RFC] travis: update sbsigntools to 0.9.4   AKASHI Takahiro
• [PATCH v5 0/8] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH v5 1/8] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v5 2/8] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCH v5 3/8] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH v5 4/8] lib: crypto: add pkcs7_digest()   AKASHI Takahiro
• [PATCH v5 5/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH v5 6/8] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH v5 7/8] test/py: efi_secboot: small rework for adding a new test   AKASHI Takahiro
• [PATCH v5 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [RFC] dfu: remove UPDATE_TFTP   AKASHI Takahiro
• [PATCH] travis: update sbsigntools to 0.9.4   AKASHI Takahiro
• [PATCH v4 00/16] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v4 01/16] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v4 02/16] dfu: modify an argument type for an address   AKASHI Takahiro
• [PATCH v4 03/16] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v4 04/16] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v4 05/16] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v4 06/16] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v4 07/16] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v4 08/16] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [PATCH v4 09/16] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [PATCH v4 10/16] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v4 11/16] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [PATCH v4 12/16] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v4 13/16] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH v4 14/16] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [PATCH v4 15/16] test/py: add a test for uefi firmware update capsule of FIT image   AKASHI Takahiro
• [PATCH v4 16/16] test/py: add a test for uefi firmware update capsule of raw image   AKASHI Takahiro
• [PATCH v2] travis: update sbsigntools to 0.9.4   AKASHI Takahiro
• [PATCH v5 6/8] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH v4 03/16] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v4 06/16] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v4 07/16] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH] efi_loader: add copyright notice   AKASHI Takahiro
• [PATCH v2] travis: update sbsigntools to 0.9.4   AKASHI Takahiro
• [PATCH v2 04/18] board: Introduce xenguest_arm64 board   AKASHI Takahiro
• [PATCH 2/2] mtd: nand: raw: denali: Wait for reset completion status   Tan, Ley Foon
• [PATCH v2 1/2] mtd: nand: raw: denali: Assert reset before deassert   Ley Foon Tan
• [PATCH v2 2/2] mtd: nand: raw: denali: Wait for reset completion status   Ley Foon Tan
• [PATCH v2 2/2] mtd: nand: raw: denali: Wait for reset completion status   Tan, Ley Foon
• [PATCH v1 3/4] clk: agilex: Handle clock configuration differently in SPL and U-Boot proper   Tan, Ley Foon
• [PATCH v1 4/4] clk: agilex: Additional membus writes for HPS PLL   Tan, Ley Foon
• [PATCH] arm: socfpga: soc64: Remove PHY interface setup from misc arch init   Tan, Ley Foon
• [PATCH] arm: socfpga: soc64: Initialize timer in SPL only   Tan, Ley Foon
• [PATCH 0/3] arm: socfpga: arria10: Add generated handoff header support   Ley Foon Tan
• [PATCH 1/3] arm: socfpga: arria10: Add qts-filter for Arria10 socfpga   Ley Foon Tan
• [PATCH 2/3] arm: socfpga: arria10: Add handoff header for A10 SoCDK SDMMC   Ley Foon Tan
• [PATCH 3/3] arm: dts: socfpga: arria10: Move to use generic handoff dtsi   Ley Foon Tan
• [PATCH] ls1028a: fix EFI boot   Andy Tang
• [EXT] Re: [PATCH] ls1028a: fix EFI boot   Andy Tang
• [EXT] [PATCH v2] ls1028a: use default scan_dev_for_boot   Andy Tang
• [PATCH v4 2/6] sifive: fu540: Add Booting from SPI   Jagan Teki
• [PATCH v4 3/6] env: Enable SPI flash env for SiFive FU540   Jagan Teki
• [PATCH] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Jagan Teki
• [PATCH] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH v2 1/2] rockchip: Add SoC detection helper   Jagan Teki
• [PATCH v2 2/2] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH v3 1/6] rock-pi-4: Enable USB3 Host   Jagan Teki
• [PATCH v3 2/6] rock-pi-4: Enable PCI/NVME   Jagan Teki
• [PATCH v3 3/6] rock-pi-4: Enable USB Gadget   Jagan Teki
• [PATCH v3 4/6] rock-pi-4: Enable HDMI output   Jagan Teki
• [PATCH v3 5/6] roc-rk3399-pc: Enable USB Gadget   Jagan Teki
• [PATCH v3 6/6] roc-rk3399-pc: Update ENV offset, size   Jagan Teki
• [PATCH v2 04/23] am335x: igep003x: Enable DM_SPI   Jagan Teki
• [PATCH v2 05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 08/23] compulab: Drop cm_t54   Jagan Teki
• [PATCH v2 09/23] compulab: Drop cm_t35   Jagan Teki
• [PATCH v2 10/23] overo: Drop omap3 overo   Jagan Teki
• [PATCH v2 12/23] logicpd: Drop omap3 zoom1   Jagan Teki
• [PATCH v2 13/23] quipos: Drop omap3 cairo   Jagan Teki
• [PATCH v2 16/23] ti: Drop sdp4430 board   Jagan Teki
• [PATCH v2 18/23] birdland: Drop bav335x   Jagan Teki
• [PATCH v2 19/23] gumstix: Drop pepper   Jagan Teki
• [PATCH v2 21/23] silica: Drop pengwyn   Jagan Teki
• [PATCH v2 16/23] ti: Drop sdp4430 board   Jagan Teki
• [PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Jagan Teki
• [PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards   Jagan Teki
• [PATCH v3 3/4] db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH   Jagan Teki
• [PATCH v2 0/7] rockchip: Add RockPI N8/N10 support   Jagan Teki
• [PATCH v2 1/7] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi   Jagan Teki
• [PATCH v2 2/7] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM   Jagan Teki
• [PATCH v2 3/7] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier   Jagan Teki
• [PATCH v2 4/7] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support   Jagan Teki
• [PATCH v2 5/7] arm64: dts: rockchip: Trivial cleanups for RockPI N10   Jagan Teki
• [PATCH v2 6/7] ARM: dts: rockchip: Add VMARC RK3288 SOM initial support   Jagan Teki
• [PATCH v2 7/7] ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support   Jagan Teki
• [PATCH] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH v2 1/2] rockchip: Add SoC detection helper   Jagan Teki
• [PATCH 00/16] spi: dm-conversion (part3)   Jagan Teki
• [PATCH v6 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Jagan Teki
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [RFC PATCH] mtd: spi: Drop redundent SPI flash driver   Jagan Teki
• [PATCH 05/16] arm: Remove ts4800 board   Jagan Teki
• [PATCH 06/16] arm: Remove tqma6s_wru4_mmc_defconfig   Jagan Teki
• [PATCH 07/16] arm: Remove pfla02 board   Jagan Teki
• [PATCH 09/16] arm: Remove riotboard board   Jagan Teki
• [PATCH 10/16] arm: Remove zc5202/zc5601 board   Jagan Teki
• [PATCH 11/16] arm: Remove cgtqmx6eval board   Jagan Teki
• [PATCH 12/16] arm: Remove ot1200 board   Jagan Teki
• [PATCH 13/16] arm: Remove dms-ba16 board   Jagan Teki
• [PATCH 14/16] arm: Remove configs/mx35pdk_defconfig board   Jagan Teki
• [PATCH 15/16] arm: Remove flea3_defconfig board   Jagan Teki
• [PATCH 16/16] arm: Remove mx31pdk_defconfig board   Jagan Teki
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Jagan Teki
• [PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Jagan Teki
• [PATCH 0/6] Add new series Micron SPI NAND devices   Jagan Teki
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH] Clean up the Spansion/Cypress/Infineon device ID table   Jagan Teki
• [PATCH 2/2] spi: add support for all spi modes with soft spi   Jagan Teki
• [PATCH] mtd: spi-nor: Enable QE bit for ISSI flash in case of SFDP   Jagan Teki
• [PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Jagan Teki
• [PATCH 0/5] mtd: Implement MTD UCLASS (use SPINOR)   Jagan Teki
• [PATCH 1/5] mtd: spi: Drop redundent SPI flash driver   Jagan Teki
• [PATCH 2/5] mtd: Add dm-mtd core ops   Jagan Teki
• [PATCH 3/5] mtd: Add SPL_DM_MTD option   Jagan Teki
• [PATCH 4/5] mtd: Build mtd-uclass as obj   Jagan Teki
• [PATCH 5/5] mtd: spi: Switch to MTD uclass (absolute UCLASS_SPI_FLASH)   Jagan Teki
• [PATCH 0/3] phy: rockchip: Add PCIe phy driver   Jagan Teki
• [PATCH 1/3] phy: Add Rockchip PCIe PHY driver   Jagan Teki
• [PATCH 2/3] pci: rockchip: Switch to generic-phy   Jagan Teki
• [PATCH 3/3] pci: rockchip: Drop legacy PHY driver   Jagan Teki
• [PATCH v4 2/5] rk3399: spl: Print SPL banner after relocation   Jagan Teki
• [PATCH v4 0/4] rtc: Add RK808 PMIC RTC   Jagan Teki
• [PATCH v4 1/4] arm: dts: rockchip: rk3399-roc-pc: Add RTC child node for RK808 PMIC   Jagan Teki
• [PATCH v4 2/4] power: pmic: rk8xx: bind rk808 RTC   Jagan Teki
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Jagan Teki
• [PATCH v4 4/4] roc-rk3399-pc: Enable DM RTC   Jagan Teki
• [PATCH] doc: driver-model: Update SPI migration status   Jagan Teki
• [PATCH 2/2] mtd: make spinand driver usable without CONFIG_DM   Jagan Teki
• [PATCH 4/4] common: Add LX TestBox checks   Jagan Teki
• [PATCH] sunxi: Add Drejo DS167 board   Jagan Teki
• [PATCH] power: axp209: Limit inrush current for A20-OLinuXino_MICRO   Jagan Teki
• microSD Breakout Port   Jagan Teki
• [PATCH 14/15] net: sun8i-emac: Lower MDIO frequency   Jagan Teki
• [RFC PATCH v2] sunxi: Add UART4 console support for A64   Jagan Teki
• [PATCH 2/2] mtd: make spinand driver usable without CONFIG_DM   Jagan Teki
• [PATCH 00/16] spi: dm-conversion (part3)   Jagan Teki
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION   Jagan Teki
• [PATCH v3 29/49] rockchip: Enable building a SPI ROM image on bob   Jagan Teki
• [PATCH v4 4/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH 1/3] ram: rk3399: Drop debug stride in driver   Jagan Teki
• [PATCH 2/3] ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUG   Jagan Teki
• [PATCH 3/3] roc-rk3399-pc: Disable RAM_ROCKCHIP_DEBUG   Jagan Teki
• [PATCH v5 0/5] roc-rk3399-pc: Custom SPL   Jagan Teki
• [PATCH v5 1/5] roc-rk3399-pc: Move leds setup in SPL   Jagan Teki
• [PATCH v5 2/5] rockchip: Don't clear the reset status reg   Jagan Teki
• [PATCH v5 3/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH v5 4/5] rockchip: spl: Move board_early_init_f after cpu timer   Jagan Teki
• [PATCH v5 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y   Jagan Teki
• rockchip RK3399 emmc booting   Jagan Teki
• [PATCH v5 0/6] riscv: sifive/fu540: SPI boot   Jagan Teki
• [PATCH v5 1/6] sifive: fu540: Add runtime boot mode detection   Jagan Teki
• [PATCH v5 2/6] sifive: fu540: Add Booting from SPI   Jagan Teki
• [PATCH v5 3/6] env: Enable SPI flash env for SiFive FU540   Jagan Teki
• [PATCH v5 4/6] sifive: fu540: Mark the default env as SPI flash   Jagan Teki
• [PATCH v5 5/6] sifive: fu540: Add boot flash script offset, size   Jagan Teki
• [PATCH v5 6/6] sifive: fu540: Enable SF distro bootcmd   Jagan Teki
• [PATCH v3 29/49] rockchip: Enable building a SPI ROM image on bob   Jagan Teki
• [PATCH 07/10] compiler*.h: sync include/linux/compiler*.h with Linux 5.7-rc5   Jagan Teki
• [PATCH] rockpro64: Enable USB3.0 Host   Jagan Teki
• [PATCH] rockchip: ram: fix debug funcfion define when RAM_ROCKCHIP_DEBUG not set   Jagan Teki
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Jagan Teki
• [PATCH 1/2] arm64: dts: rockchip: Add ROCKPi 4A/4B support   Jagan Teki
• [PATCH 2/2] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support   Jagan Teki
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH v9 2/2] board: presidio-asic: Add SPI NOR support   Jagan Teki
• [PATCH 0/6] Add new series Micron SPI NAND devices   Jagan Teki
• [PATCH] Update Winbond SPI NOR Flash ID table   Jagan Teki
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH v2 1/2] driver: spi: add brcm iproc qspi support.   Jagan Teki
• [PATCH 00/16] board: Add new features for ROCKPi N8/N10   Jagan Teki
• [PATCH 01/16] ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux   Jagan Teki
• [PATCH 02/16] arm: dts: rockchip: Sync rk3288 dtsi from linux   Jagan Teki
• [PATCH 03/16] ARM: dts: rockchip: Add usb host0 ohci node for rk3288   Jagan Teki
• [PATCH 04/16] ARM: dts: rockchip: Add USB for RockPI N8/N10   Jagan Teki
• [PATCH 05/16] arm: dts: rockchip: Add HDMI out for RockPI N8/N10   Jagan Teki
• [PATCH 06/16] arm64: dts: rockchip: Add PCIe for RockPI N10   Jagan Teki
• [PATCH 07/16] configs: Enable USB host on Rock-PI-N10   Jagan Teki
• [PATCH 08/16] configs: Enable HDMI output   Jagan Teki
• [PATCH 09/16] configs: Enable USB Gadget for rock-pi-n10   Jagan Teki
• [PATCH 10/16] configs: Enable USB 2.0 on Rock-PI-N8   Jagan Teki
• [PATCH 11/16] configs: Enable USB Gadget on rock-pi-n8   Jagan Teki
• [PATCH 12/16] rk3288: rock-pi-n8: Add console settings   Jagan Teki
• [PATCH 13/16] configs: Enable HDMI output for rock-pi-n8   Jagan Teki
• [PATCH 14/16] rock-pi-n10: Enable PCI/NVME   Jagan Teki
• [PATCH 15/16] arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10   Jagan Teki
• [PATCH 16/16] rock-p-n8/n10: Disable RAM_ROCKCHIP_DEBUG   Jagan Teki
• [PATCH v2 1/2] arm64: dts: rockchip: Add ROCKPi 4A/4B support   Jagan Teki
• [PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support   Jagan Teki
• [PATCH v5 0/6] riscv: sifive/fu540: SPI boot   Jagan Teki
• [PATCH 03/16] ARM: dts: rockchip: Add usb host0 ohci node for rk3288   Jagan Teki
• [PATCH v3 1/2] rockchip: Add rk3288 SoC detection helper   Jagan Teki
• [PATCH v3 2/2] rockchip: rk3288: Add OF board setup   Jagan Teki
• [PATCH v6 0/5] rockchip: roc-rk3399-pc: Custom SPL   Jagan Teki
• [PATCH v6 1/5] rockchip: rk3399: Add weak led_setup()   Jagan Teki
• [PATCH v6 2/5] rockchip: roc-rk3399-pc: Add custom led_setup()   Jagan Teki
• [PATCH v6 3/5] rockchip: Don't clear the reset status reg   Jagan Teki
• [PATCH v6 4/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH v6 5/5] rockchip: roc-rk3399-pc: Set LED only during POR and pwr_key=y   Jagan Teki
• [PATCH v2 00/12] rockchip: ROCKPi N8/N10 hardware enablement   Jagan Teki
• [PATCH v2 01/12] ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux   Jagan Teki
• [PATCH v2 02/12] arm: dts: rockchip: Sync rk3288 dtsi from linux   Jagan Teki
• [PATCH v2 03/12] ARM: dts: rockchip: Add usb host0 ohci node for rk3288   Jagan Teki
• [PATCH v2 04/12] ARM: dts: rockchip: Add USB for RockPI N8/N10   Jagan Teki
• [PATCH v2 05/12] arm: dts: rockchip: Add HDMI out for RockPI N8/N10   Jagan Teki
• [PATCH v2 06/12] arm64: dts: rockchip: Add PCIe for RockPI N10   Jagan Teki
• [PATCH v2 07/12] rockchip: rock-pi-n10: Enable on board devices   Jagan Teki
• [PATCH v2 08/12] rockchip: evb_rk3288: Add console settings   Jagan Teki
• [PATCH v2 09/12] rockchip: rock-pi-n8: Enable on board devices   Jagan Teki
• [PATCH v2 10/12] rockchip: rock-pi-n10: Enable PCI/NVME   Jagan Teki
• [PATCH v2 11/12] arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10   Jagan Teki
• [PATCH v2 12/12] rockchip: rock-p-n8/n10: Disable RAM_ROCKCHIP_DEBUG   Jagan Teki
• [PATCH 0/7] rockchip: Add Engicam PX30.Core support   Jagan Teki
• [PATCH 1/7] arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH 2/7] arm: dts: rockchip: Add Engicam PX30.Core SOM   Jagan Teki
• [PATCH 3/7] rockchip: px30: Add EVB_PX30 Kconfig help   Jagan Teki
• [PATCH 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH 5/7] arm: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 10.1" OF   Jagan Teki
• [PATCH 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF   Jagan Teki
• [PATCH 7/7] doc: rockchip: Document Rockchip miniloader flashing   Jagan Teki
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Jagan Teki
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Jagan Teki
• [PATCH 1/1] arm-freescale-mx6sx: Fix imx6sx UART5 wrong iomux register configuration   Antonio Tessarolo
• [PATCH 1/1] arm-freescale-mx6sx: Fix imx6sx UART5 wrong iomux register configuration   Antonio Tessarolo
• [PATCH] bugfix: tpm2_tis_spi: redeclaration compile error   Bruno Thomsen
• [PATCH] configs:ls1046afrwy: Add tfa secure boot defonfig   Manish Tomar
• [PATCH 00/15] net: sun8i-emac fixes and cleanups   Amit Tomer
• [PATCH] pci: rockchip: Mark inline functions as static inline   Philipp Tomsich
• Using gerrit or github for review?   Michael Nazzareno Trimarchi
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Marek Vasut
• [PATCH V2 2/7] env: Add H_DEFAULT flag   Marek Vasut
• [PATCH V2 3/7] env: Discern environment coming from external storage   Marek Vasut
• [PATCH V2 4/7] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH V2 5/7] env: nowhere: Implement .load callback   Marek Vasut
• [PATCH V2 6/7] env: Add option to only ever append environment   Marek Vasut
• [PATCH V2 7/7] env: Add support for explicit write access list   Marek Vasut
• [PATCH 01/12] net: dc2114x: Use PCI_DEVICE() to define PCI device compat list   Marek Vasut
• [PATCH 02/12] net: dc2114x: Support all DC2114x   Marek Vasut
• [PATCH 03/12] net: dc2114x: Add Kconfig entries   Marek Vasut
• [PATCH 04/12] net: dc2114x: Drop update_srom()   Marek Vasut
• [PATCH 05/12] net: dc2114x: Use standard I/O accessors   Marek Vasut
• [PATCH 06/12] net: dc2114x: Introduce private data   Marek Vasut
• [PATCH 07/12] net: dc2114x: Pass private data around   Marek Vasut
• [PATCH 08/12] net: dc2114x: Pass PCI BDF into phys_to_bus()   Marek Vasut
• [PATCH 09/12] net: dc2114x: Add RX/TX rings into the private data   Marek Vasut
• [PATCH 10/12] net: dc2114x: Split RX path   Marek Vasut
• [PATCH 11/12] net: dc2114x: Split common parts of non-DM functions out   Marek Vasut
• [PATCH 12/12] net: dc2114x: Add DM support   Marek Vasut
• [PATCH 1/2] ARM: dts: stm32: Move ethernet PHY into SoM DT   Marek Vasut
• [PATCH 2/2] ARM: dts: stm32: Add DHSOM based DRC02 board   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/net   Marek Vasut
• [PATCH V2 4/7] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH V2 4/7] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH] ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present   Marek Vasut
• [PATCH] ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its   Marek Vasut
• [PATCH] ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM   Marek Vasut
• [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Marek Vasut
• [PATCH 01/17] armv8: Fix SMCC and ARM_PSCI_FW dependencies   Nastya Vicodin
• [PATCH v4 00/11] new rtc methods, rtc command, and tests   Rasmus Villemoes
• [PATCH v4 01/11] rtc: add dm_rtc_read helper and ->read method   Rasmus Villemoes
• [PATCH v4 02/11] rtc: add dm_rtc_write() helper   Rasmus Villemoes
• [PATCH v4 03/11] rtc: fall back to ->{read, write} if ->{read, write}8 are not provided   Rasmus Villemoes
• [PATCH v4 04/11] rtc: pcf2127: provide ->read method   Rasmus Villemoes
• [PATCH v4 05/11] rtc: pcf2127: provide ->write method   Rasmus Villemoes
• [PATCH v4 06/11] rtc: add rtc command   Rasmus Villemoes
• [PATCH v4 07/11] rtc: sandbox-rtc: fix set method   Rasmus Villemoes
• [PATCH v4 08/11] rtc: i2c_rtc_emul: catch any write to the "reset" register   Rasmus Villemoes
• [PATCH v4 09/11] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write   Rasmus Villemoes
• [PATCH v4 10/11] sandbox: add rtc command to defconfigs   Rasmus Villemoes
• [PATCH v4 11/11] test: dm: rtc: add tests of rtc shell command   Rasmus Villemoes
• [PATCH] remove include/config_defaults.h   Rasmus Villemoes
• [RFC 1/4] dtoc: add POC for dtb shrink   Rasmus Villemoes
• [RFC 1/4] dtoc: add POC for dtb shrink   Rasmus Villemoes
• [PATCH] rtc: pcf2127: fix uninitialized variable msg   Rasmus Villemoes
• [EXT] Re: [PATCH] rtc: pcf2127: fix uninitialized variable msg   Rasmus Villemoes
• [PATCH 1/4] fs/squashfs: new filesystem   Rasmus Villemoes
• [PATCH 1/4] fs/squashfs: new filesystem   Rasmus Villemoes
• [PATCH 4/5] arm: dts: k3-j721e: Sync CPSW DT node from kernel   Lokesh Vutla
• [PATCH 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes   Lokesh Vutla
• [PATCH 0/8] Introduce UCLASS_SOC   Lokesh Vutla
• [GIT PULL] TI changes for v2020.10-rc1   Lokesh Vutla
• [PATCH v3 0/3] Sync UDMA bindings from kernel   Lokesh Vutla
• [PATCH 0/6] TI: AM654/j721e: Ringacc and UDMA updates   Lokesh Vutla
• [PATCH 0/5] TI: AM654/J721e: Sync CPSW DT node from kernel   Lokesh Vutla
• [PATCH] arm: k3: use correct weak function name spl_board_prepare_for_linux   Lokesh Vutla
• [PATCH v2] arm: k3: Consolidate and silence k3_fit_atf.sh call   Lokesh Vutla
• [PATCH] ARM: da850-evm: Unify config options with Kconfig   Lokesh Vutla
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH 00/18] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
• [PATCH 01/18] board: ti: board_detect: Add stub functions for EEPROM detection apis   Lokesh Vutla
• [PATCH 02/18] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined   Lokesh Vutla
• [PATCH 03/18] board: ti: j721e: Update fdt fixup logic for interconnect nodes   Lokesh Vutla
• [PATCH 04/18] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled   Lokesh Vutla
• [PATCH 05/18] arm: mach-k3: Move mmr_unlock to a common location   Lokesh Vutla
• [PATCH 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Lokesh Vutla
• [PATCH 07/18] arm: mach-k3: j721e: Add detection for j721e   Lokesh Vutla
• [PATCH 08/18] arm: mach-k3: j721e: Fix unlocking control module registers   Lokesh Vutla
• [PATCH 09/18] arm: mach-k3: j7200: Add support for SOC detection   Lokesh Vutla
• [PATCH 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM   Lokesh Vutla
• [PATCH 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw   Lokesh Vutla
• [PATCH 12/18] board: ti: j7200: Add board detection support for j7200   Lokesh Vutla
• [PATCH 13/18] ram: k3-j721e: Relax version checks for memory controller   Lokesh Vutla
• [PATCH 14/18] mmc: am654_sdhci: Add support for J7200 devices   Lokesh Vutla
• [PATCH 15/18] arm: dts: k3-j7200: Add dts support   Lokesh Vutla
• [PATCH 16/18] arm: dts: k3-j7200: Add lpddr4 1600MTs configuration   Lokesh Vutla
• [PATCH 17/18] configs: j7200_evm_r5: Add initial support   Lokesh Vutla
• [PATCH 18/18] configs: j7200_evm_a72: Add Initial support   Lokesh Vutla
• [PATCH 15/18] arm: dts: k3-j7200: Add dts support   Lokesh Vutla
• [PATCH 07/18] arm: mach-k3: j721e: Add detection for j721e   Lokesh Vutla
• [PATCH v2 00/18] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
• [PATCH v2 01/18] board: ti: board_detect: Add stub functions for EEPROM detection apis   Lokesh Vutla
• [PATCH v2 02/18] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined   Lokesh Vutla
• [PATCH v2 03/18] board: ti: j721e: Update fdt fixup logic for interconnect nodes   Lokesh Vutla
• [PATCH v2 04/18] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled   Lokesh Vutla
• [PATCH v2 05/18] arm: mach-k3: Move mmr_unlock to a common location   Lokesh Vutla
• [PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Lokesh Vutla
• [PATCH v2 07/18] arm: mach-k3: j721e: Add detection for j721e   Lokesh Vutla
• [PATCH v2 08/18] arm: mach-k3: j721e: Fix unlocking control module registers   Lokesh Vutla
• [PATCH v2 09/18] arm: mach-k3: j7200: Add support for SOC detection   Lokesh Vutla
• [PATCH v2 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM   Lokesh Vutla
• [PATCH v2 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw   Lokesh Vutla
• [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets   Lokesh Vutla
• [PATCH v2 13/18] board: ti: j7200: Add board detection support for j7200   Lokesh Vutla
• [PATCH v2 14/18] ram: k3-j721e: Relax version checks for memory controller   Lokesh Vutla
• [PATCH v2 15/18] arm: dts: k3-j7200: Add dts support   Lokesh Vutla
• [PATCH v2 16/18] arm: dts: k3-j7200: Add R5 specific dts support   Lokesh Vutla
• [PATCH v2 17/18] configs: j7200_evm_r5: Add initial support   Lokesh Vutla
• [PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support   Lokesh Vutla
• [PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Lokesh Vutla
• [PATCH] ram: rockchip: Disable debug output of RAM init by default   Michael Walle
• [PATCH v4 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v4 1/2] armv8: ls1028a: move FSL_LAYERSCAPE to kconfig   Michael Walle
• [PATCH v4 2/2] board: kontron: add sl28 support   Michael Walle
• [PATCH 0/2] Currently it is possible to select the P2SB driver without selecting the   Wolfgang Wallner
• [PATCH 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Wolfgang Wallner
• [PATCH 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Wolfgang Wallner
• [PATCH v2 0/2] x86: p2sb: P2SB fixes   Wolfgang Wallner
• [PATCH v2 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Wolfgang Wallner
• [PATCH v2 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Wolfgang Wallner
• Antwort: Re: [PATCH v2 0/2] x86: p2sb: P2SB fixes   Wolfgang Wallner
• [PATCH v2 0/2] x86: p2sb: P2SB fixes   Wolfgang Wallner
• [PATCH v2 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Wolfgang Wallner
• [PATCH v2 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Wolfgang Wallner
• [PATCH v3 0/2] x86: p2sb: P2SB fixes   Wolfgang Wallner
• [PATCH v3 1/2] drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband Bridge   Wolfgang Wallner
• [PATCH v3 2/2] x86: p2sb: make P2SB driver depend on P2SB uclass   Wolfgang Wallner
• [PATCH v1 33/43] x86: irq: Support flags for acpi_gpe   Wolfgang Wallner
• [PATCH v1 37/43] x86: Store the coreboot table address in global_data   Wolfgang Wallner
• [PATCH v1 41/43] x86: acpi: Correct the version of the MADT   Wolfgang Wallner
• [PATCH v1 22/43] x86: Add support for building up an NHLT structure   Wolfgang Wallner
• [PATCH v1 19/43] x86: pinctrl: Add multi-ACPI control   Wolfgang Wallner
• [PATCH v1 23/43] x86: Add error checking for csrt table generation   Wolfgang Wallner
• [PATCH v2 20/44] x86: pinctrl: Add multi-ACPI control   Wolfgang Wallner
• [PATCH v1 22/43] x86: Add support for building up an NHLT structure   Wolfgang Wallner
• [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO   Wolfgang Wallner
• [PATCH v2 21/44] x86: pinctrl: Set up itss in the probe() method   Wolfgang Wallner
• [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation   Wolfgang Wallner
• [PATCH v2 34/44] x86: apl: Fix save/restore of ITSS priorities   Wolfgang Wallner
• [PATCH v2 38/44] x86: Store the coreboot table address in global_data   Wolfgang Wallner
• [PATCH] x86: irq: Fix some typos   Wolfgang Wallner
• [PATCH] acpi: device: Fix check for sequence number   Wolfgang Wallner
• chromebook_coral: build failure   Wolfgang Wallner
• [PATCH] fsl-layerscape: enable dwc3 snooping feature   Ran Wang
• [PATH v2] fsl-layerscape: enable dwc3 snooping feature   Ran Wang
• Chainloading U-Boot from Fastboot on Tegra30   Stephen Warren
• [PATCH v3 11/14] test: environment in ext4   Stephen Warren
• [PATCH v3 14/14] test: sandbox: add test for erase command   Stephen Warren
• [PATCH] test: Have test_fs work with non-functional guestmount tools   Stephen Warren
• [PATCH] test: Have test_fs work with non-functional guestmount tools   Stephen Warren
• test/py GPIO failure in u-boot/master   Stephen Warren
• test/py GPIO failure in u-boot/master   Stephen Warren
• test/py GPIO failure in u-boot/master   Stephen Warren
• [PATCH] fixdep: fix CONFIG_IS_ENABLED etc. handling   Stephen Warren
• [v2] test: Have test_fs work with non-functional guestmount tools   Stephen Warren
• uboot-test-hooks: dfu-util   Stephen Warren
• uboot-test-hooks: dfu-util   Stephen Warren
• [PATCH] fixdep: fix coding style in previous fix   Stephen Warren
• QSPI mode on imx6ull evk   Matthias Weißer
• QSPI mode on imx6ull evk   Matthias Weißer
• [RFC PATCH v3 0/6] Improve USB Keyboard support for rpi3/rpi4   Jason Wessel
• [RFC PATCH v3 1/6] xhci: Add polling support for USB keyboards   Jason Wessel
• [RFC PATCH v3 2/6] usb_kbd: Do not fail the keyboard if it does not have an interrupt pending   Jason Wessel
• [RFC PATCH v3 3/6] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
• [RFC PATCH v3 4/6] xhci-ring.c: Add the poll_pend state to properly abort transactions   Jason Wessel
• [RFC PATCH v3 5/6] xhci-ring: Fix crash when issuing "usb reset"   Jason Wessel
• [RFC PATCH v3 6/6] usb.c: Add a retry in the usb_prepare_device()   Jason Wessel
• [PATCH 0/6] Improve USB Keyboard support for all rpi boards   Jason Wessel
• [PATCH 1/6] xhci: Add polling support for USB keyboards   Jason Wessel
• [PATCH 2/6] usb_kbd: succeed even if no interrupt is pending   Jason Wessel
• [PATCH 3/6] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
• [PATCH 4/6] xhci-ring.c: Add the poll_pend state to properly abort transactions   Jason Wessel
• [PATCH 5/6] xhci-ring: Fix crash when issuing "usb reset"   Jason Wessel
• [PATCH 6/6] usb.c: Add a retry in the usb_prepare_device()   Jason Wessel
• [PATCH] bcmgenet: fix DMA buffer management   Jason Wessel
• [PATCH] bcmgenet: fix DMA buffer management   Jason Wessel
• [PATCH] bcmgenet: fix DMA buffer management   Jason Wessel
• [PATCH 1/2] bcmgenet: fix DMA buffer management   Jason Wessel
• [PATCH 2/2] bcmgenet: Add support for rgmii-rxid   Jason Wessel
• [PULL][PATCH 0/9] Raspberry pi improvements qemu/usb/ethernet   Jason Wessel
• [PATCH 1/9] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Jason Wessel
• [PATCH 2/9] xhci: Add polling support for USB keyboards   Jason Wessel
• [PATCH 3/9] usb_kbd: succeed even if no interrupt is pending   Jason Wessel
• [PATCH 4/9] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
• [PATCH 5/9] xhci-ring.c: Add the poll_pend state to properly abort transactions   Jason Wessel
• [PATCH 6/9] xhci-ring: Fix crash when issuing "usb reset"   Jason Wessel
• [PATCH 7/9] usb.c: Add a retry in the usb_prepare_device()   Jason Wessel
• [PATCH 8/9] bcmgenet: fix DMA buffer management   Jason Wessel
• [PATCH 9/9] bcmgenet: Add support for rgmii-rxid   Jason Wessel
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• PPC440EPx Evaluation Board Schematic   Nicholas Williams
• [PATCH 1/3] board: mediatek: fix mmc_get_boot_dev() for platforms without external SD   David Woodhouse
• [PATCH 2/3] board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environment   David Woodhouse
• [PATCH 3/3] board: mediatek: Add support for UniElec U7623 board   David Woodhouse
• [PATCH 3/3] board: mediatek: Add support for UniElec U7623 board   David Woodhouse
• [PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623   David Woodhouse
• [PATCH] env/fat.c: allow loading from a FAT partition on the MMC boot device   David Woodhouse
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Derald D. Woods
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Derald D. Woods
• [PATCH] ARM: omap3: evm: Complete DM_ETH and DM_USB migrations   Derald D. Woods
• [PATCH v2] ARM: omap3: evm: Complete DM_ETH and DM_USB migrations   Derald D. Woods
• [PATCH v3] ARM: omap3: evm: Complete DM_ETH and DM_USB migrations   Derald D. Woods
• [PATCH v3 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v3 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v3 2/2] test: gpio: Add tests for the managed API   Pratyush Yadav
• Using gerrit or github for review?   Pratyush Yadav
• [PATCH] x86: remove unused setup_pcat_compatibility() stub   Masahiro Yamada
• [PATCH] Revert "ARM: uniphier: add weird workaround code for LD20"   Masahiro Yamada
• [PATCH v2] arm64: issue ISB after updating system registers   Masahiro Yamada
• [PATCH] x86: remove unused setup_pcat_compatibility() stub   Masahiro Yamada
• [PATCH v2] arm64: issue ISB after updating system registers   Masahiro Yamada
• [PATCH 01/10] Revert "ARM: uniphier: add weird workaround code for LD20"   Masahiro Yamada
• [PATCH 02/10] ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN to 2MB   Masahiro Yamada
• [PATCH 03/10] ARM: uniphier: consolidate SoC select menu   Masahiro Yamada
• [PATCH 04/10] ARM: uniphier: sync with Linux 5.8-rc4   Masahiro Yamada
• [PATCH 05/10] ARM: uniphier: fix build error when CONFIG_MICRO_SUPPORT_CARD=n   Masahiro Yamada
• [PATCH 06/10] ARM: uniphier: remove unused uniphier_sbc_init_admulti()   Masahiro Yamada
• [PATCH 07/10] ARM: uniphier: remove support for NOR Flash on support card   Masahiro Yamada
• [PATCH 08/10] bus: uniphier-system-bus: add UniPhier System Bus driver   Masahiro Yamada
• [PATCH 09/10] bus: uniphier-system-bus: move hardware init from board files   Masahiro Yamada
• [PATCH 10/10] ARM: uniphier: remove sbc/ directory   Masahiro Yamada
• [PATCH 1/3] serial: uniphier: use register macros instead of structure   Masahiro Yamada
• [PATCH 2/3] serial: uniphier: flush transmitter before changing hardware settings   Masahiro Yamada
• [PATCH 3/3] serial: uniphier: enable FIFO   Masahiro Yamada
• [PATCH 2/2] mtd: nand: raw: denali: Wait for reset completion status   Masahiro Yamada
• [PATCH 1/2] mtd: nand: raw: denali: Assert reset before deassert   Masahiro Yamada
• [PATCH v2 1/2] mtd: nand: raw: denali: Assert reset before deassert   Masahiro Yamada
• [PATCH v2 2/2] mtd: nand: raw: denali: Wait for reset completion status   Masahiro Yamada
• [PATCH] ARM: uniphier: remove NAND reset code   Masahiro Yamada
• [PATCH 01/10] Revert "ARM: uniphier: add weird workaround code for LD20"   Masahiro Yamada
• [PATCH 1/3] serial: uniphier: use register macros instead of structure   Masahiro Yamada
• [PATCH] ARM: uniphier: remove NAND reset code   Masahiro Yamada
• [GIT PULL] UniPhier SoC updates for v2020.10   Masahiro Yamada
• [PATCH] fdt_support: add static to fdt_node_set_part_info()   Masahiro Yamada
• [PATCH 1/2] fdt_support: call mtdparts_init() after finding MTD node to fix up   Masahiro Yamada
• [PATCH 2/2] fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()   Masahiro Yamada
• [PATCH 2/2] fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()   Masahiro Yamada
• [PATCH v2 1/2] fdt_support: call mtdparts_init() after finding MTD node to fix up   Masahiro Yamada
• [PATCH v2 2/2] fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()   Masahiro Yamada
• [PATCH 1/3] treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()   Masahiro Yamada
• [PATCH 2/3] treewide: remove (phys_addr_t) casts from devfdt_get_addr()   Masahiro Yamada
• [PATCH 3/3] treewide: convert devfdt_get_addr() to dev_read_addr()   Masahiro Yamada
• [PATCH] fixdep: fix CONFIG_IS_ENABLED etc. handling   Masahiro Yamada
• [PATCH 1/5] ARM: uniphier: rename include guard of include/configs/uniphier.h   Masahiro Yamada
• [PATCH 2/5] ARM: uniphier: remove unused uniphier_pin_init()   Masahiro Yamada
• [PATCH 3/5] ARM: uniphier: remove unneeded header inclusion from board_late_init.c   Masahiro Yamada
• [PATCH 4/5] serial: uniphier: fix typo in comment   Masahiro Yamada
• [PATCH 5/5] ARM: uniphier: use FIELD_GET() to get access to revision register fields   Masahiro Yamada
• [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman   Kever Yang
• Re: [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling【请注意，邮件由sjg at google.com代发】   Kever Yang
• [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman   Kever Yang
• Pull request: u-boot-rockchip-20200708   Kever Yang
• [PATCH 1/3] rockchip: px30: sync the main rk3326 dtsi from mainline   Kever Yang
• [PATCH 2/3] rockchip: px30: sync Odroid Go Advance devicetree from Linux   Kever Yang
• [PATCH 3/3] rockchip: board: add Hardkernel Odroid Go2 board   Kever Yang
• [PATCH] rockchip: rk3288: Add OF board setup   Kever Yang
• Re: [PATCH] pci: rockchip: Mark inline functions as static inline【请注意，邮件由tom.rini at gmail.com代发】   Kever Yang
• [PATCH] rockchip: rk3328: Add SPI support   Kever Yang
• [PATCH v2 1/2] rockchip: Add SoC detection helper   Kever Yang
• [PATCH] rockchip: rk3328: Add SPI support   Kever Yang
• [PATCH 1/3] drivers: clk: rockchip: clk_rk3328: Add SPI support   Kever Yang
• [PATCH 2/3] drivers: spi: rk_spi: Add support for RK3328   Kever Yang
• [PATCH 3/3] ARM: dts: rk3328: Add SPI support   Kever Yang
• [PATCH 1/2] ARM: dts: rk3328-rock64: Add SPI Flash support   Kever Yang
• [PATCH 2/2] configs: rock64-rk3328_defconfig: Add SPI Flash support   Kever Yang
• [PATCH] rockchip: sdram: fix dram_init_banksize   Kever Yang
• [PATCH v2 1/2] rockchip: Add SoC detection helper   Kever Yang
• [PATCH v3 6/6] roc-rk3399-pc: Update ENV offset, size   Kever Yang
• [PATCH v3 4/6] rock-pi-4: Enable HDMI output   Kever Yang
• [PATCH 1/3] phy: Add Rockchip PCIe PHY driver   Kever Yang
• [PATCH 2/3] pci: rockchip: Switch to generic-phy   Kever Yang
• [PATCH 3/3] pci: rockchip: Drop legacy PHY driver   Kever Yang
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Kever Yang
• [PATCH 1/3] ram: rk3399: Drop debug stride in driver   Kever Yang
• [PATCH 2/3] ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUG   Kever Yang
• [PATCH 3/3] roc-rk3399-pc: Disable RAM_ROCKCHIP_DEBUG   Kever Yang
• [PATCH v5 1/5] roc-rk3399-pc: Move leds setup in SPL   Kever Yang
• [PATCH v5 2/5] rockchip: Don't clear the reset status reg   Kever Yang
• [PATCH v5 3/5] rockchip: Separate the reset cause from display cpuinfo   Kever Yang
• [PATCH v5 4/5] rockchip: spl: Move board_early_init_f after cpu timer   Kever Yang
• [PATCH v3 6/6] roc-rk3399-pc: Update ENV offset, size   Kever Yang
• [PATCH 0/2] PINE64 Rock64 board: Add SPI Flash support   Kever Yang
• [PATCH] rockchip: sdram: fix dram_init_banksize   Kever Yang
• [PATCH 0/3] rockchip: rk3328: Add SPI support   Kever Yang
• [PATCH] rockchip: rk3399: Add default env to support compressed krenel Image   Kever Yang
• rk3399: boot from compressed Image   Kever Yang
• [PATCH] rockchip: ram: fix debug funcfion define when RAM_ROCKCHIP_DEBUG not set   Kever Yang
• [PATCH] rockpro64: Enable USB3.0 Host   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add ROCKPi 4A/4B support   Kever Yang
• [PATCH 2/2] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support   Kever Yang
• [PATCH v4 3/4] rtc: rk8xx: Add base support for the RK808 PMIC RTC   Kever Yang
• [PATCH 01/16] ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux   Kever Yang
• [PATCH 02/16] arm: dts: rockchip: Sync rk3288 dtsi from linux   Kever Yang
• [PATCH 03/16] ARM: dts: rockchip: Add usb host0 ohci node for rk3288   Kever Yang
• [PATCH 07/16] configs: Enable USB host on Rock-PI-N10   Kever Yang
• [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S   Kever Yang
• [PATCH] rockchp: firefly-rk3399: enable CONFIG_USB_DWC3   Kever Yang
• [PATCH v2 1/2] arm64: dts: rockchip: Add ROCKPi 4A/4B support   Kever Yang
• [PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support   Kever Yang
• [PATCH v3 2/2] rockchip: rk3288: Add OF board setup   Kever Yang
• [PATCH v3 1/2] rockchip: Add rk3288 SoC detection helper   Kever Yang
• [PATCH v6 1/5] rockchip: rk3399: Add weak led_setup()   Kever Yang
• [PATCH v6 2/5] rockchip: roc-rk3399-pc: Add custom led_setup()   Kever Yang
• [PATCH v6 5/5] rockchip: roc-rk3399-pc: Set LED only during POR and pwr_key=y   Kever Yang
• [PATCH v2 03/12] ARM: dts: rockchip: Add usb host0 ohci node for rk3288   Kever Yang
• [PATCH v2 04/12] ARM: dts: rockchip: Add USB for RockPI N8/N10   Kever Yang
• [PATCH v2 05/12] arm: dts: rockchip: Add HDMI out for RockPI N8/N10   Kever Yang
• [PATCH v2 06/12] arm64: dts: rockchip: Add PCIe for RockPI N10   Kever Yang
• [PATCH v2 07/12] rockchip: rock-pi-n10: Enable on board devices   Kever Yang
• [PATCH v2 08/12] rockchip: evb_rk3288: Add console settings   Kever Yang
• [PATCH v2 09/12] rockchip: rock-pi-n8: Enable on board devices   Kever Yang
• [PATCH v2 10/12] rockchip: rock-pi-n10: Enable PCI/NVME   Kever Yang
• [PATCH v2 11/12] arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10   Kever Yang
• [PATCH v2 12/12] rockchip: rock-p-n8/n10: Disable RAM_ROCKCHIP_DEBUG   Kever Yang
• Pull request: u-boot-rockchip-20200722   Kever Yang
• [PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support   Kever Yang
• [PATCH v3 2/2] rockchip: rk3288: Add OF board setup   Kever Yang
• [PATCH v6 0/5] rockchip: roc-rk3399-pc: Custom SPL   Kever Yang
• [PATCH v2 00/12] rockchip: ROCKPi N8/N10 hardware enablement   Kever Yang
• rk3399: boot from compressed Image   Tian Yuanhao
• [PATCH v2 0/6] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v2 1/6] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH v2 2/6] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH v2 3/6] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH v2 4/6] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v2 5/6] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH v2 6/6] configs: mt8512: enable fastboot   Chunfeng Yun
• [PATCH v3 0/7] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v3 1/7] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH v3 2/7] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH v3 3/7] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH v3 4/7] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v3 5/7] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
• [PATCH v3 6/7] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH v3 7/7] configs: mt8512: enable fastboot   Chunfeng Yun
• AW: [PATCH 03/16] dh_imx6: Switch to full DM-aware   Ludwig Zenz
• [PATCH] arm: dts: ls1028a: Add dspi flash device node to qds   Qiang Zhao
• [PATCH] ARM: add Kconfig option for PSCI 0.1   Icenowy Zheng
• [U-Boot] Pull request: u-boot-riscv/next   uboot at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master 2020-07-02(2)   uboot at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master 20200724   uboot at andestech.com
• fs:fat: Fix small file read error   zzp blizzard
• [PATCH] find dtb in android boot image with header version 2 during bootm   chenshuo
• [PATCH v4 14/14] dtoc: add test for cd-gpios   sjg at chromium.org
• [PATCH 2/2] spi: fsl_qspi: Support to use full AHB space on i.MX   sbabic at denx.de
• [PATCH 1/2] spi: fsl_qspi: Add support for i.MX7ULP   sbabic at denx.de
• [PATCH] imx6: Remove unneeded CONFIG_DM_MDIO   sbabic at denx.de
• [PATCH] arm: Add extra boot device (UART) to run Ymodem u-boot.img boot on XEA (imx28)   sbabic at denx.de
• [PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address   sbabic at denx.de
• [PATCH] pico-imx6ul: Fix Quick Start Guide URL   sbabic at denx.de
• [PATCH] gpio: mxc_gpio: Improve to use ofdata_to_platdata   sbabic at denx.de
• [PATCH] imx6: aristainetos: sync defconfig with 2020.10   sbabic at denx.de
• [PATCH] arm: dts: imx7: Fix error in coresight TPIU graph connection   sbabic at denx.de
• [PATCH] watchdog: imx: Support set timeout by wdt command   sbabic at denx.de
• [PATCH 1/3] misc: scu_api: Add SCFW API to get the index of boot container set   sbabic at denx.de
• [PATCH 1/1] ARM: mx6: make CAAM usable on the i.MX6 boards   sbabic at denx.de
• [PATCH v2 11/14] ARM: dts: imx7-colibri: multiple node updates   sbabic at denx.de
• [PATCH v2 07/14] ARM: dts: imx8mm-verdin: eeprom nodes adjustments   sbabic at denx.de
• [PATCH v2 10/14] toradex: common: show boot logo   sbabic at denx.de
• [PATCH v2 12/14] colibri-imx6ull: show boot logo   sbabic at denx.de
• [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers   sbabic at denx.de
• [PATCH 2/2] imx8m: soc: Remove unneeded space   sbabic at denx.de
• [PATCH v2 04/14] toradex: tdx-cfg-block: add support for EEPROM   sbabic at denx.de
• [PATCH 1/2] imx8m: ddrphy_utils: Improve coding style   sbabic at denx.de
• [PATCH v2 08/14] verdin-imx8mm: add EEPROM support for carrier board   sbabic at denx.de
• [PATCH v2 13/14] colibri-imx6ull: fix splash screen logo drawing   sbabic at denx.de
• [PATCH v2 03/14] toradex: tdx-cfg-block: add carrier boards and display adapters   sbabic at denx.de
• [PATCH v2 14/14] colibri-imx7: fix splash logo drawing   sbabic at denx.de
• [PATCH v2 01/14] imx: mx7: fix DDRC size in A7-M4 mapping table   sbabic at denx.de
• [PATCH v2 06/14] toradex: tdx-cfg-block: add carrier board info printing   sbabic at denx.de
• [PATCH v2 05/14] toradex: tdx-cfg-clock: add migration routine from PID8   sbabic at denx.de
• [PATCH v2 09/14] ARM: dts: imx6ull-colibri: move u-boot specific node   sbabic at denx.de
• [PATCH] bcmgenet: fix DMA buffer management   etienne.duble at gmail.com
• [PATCHv3] usb: max3420: add the gadget driver   jassisinghbrar at gmail.com
• [PATCH] sandbox: enable FIT cipher support in defconfig   patrick.oppenlander at gmail.com
• [PATCH 1/3] mkimage: fit: only process one cipher node   patrick.oppenlander at gmail.com
• [PATCH 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   patrick.oppenlander at gmail.com
• [PATCH 3/3] mkimage: fit: don't cipher ciphered data   patrick.oppenlander at gmail.com
• [PATCH v2] mkimage: FIT ciphering bug fixes   patrick.oppenlander at gmail.com
• [PATCH v2 1/3] mkimage: fit: only process one cipher node   patrick.oppenlander at gmail.com
• [PATCH v2 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   patrick.oppenlander at gmail.com
• [PATCH v2 3/3] mkimage: fit: don't cipher ciphered data   patrick.oppenlander at gmail.com
• [PATCH] mkimage: fit: include image cipher in configuration signature   patrick.oppenlander at gmail.com
• [PATCH] mkimage: fit: fix import of external data   patrick.oppenlander at gmail.com
• [PATCH 0/6] Add new series Micron SPI NAND devices   shiva.linuxworks at gmail.com
• [PATCH 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names   shiva.linuxworks at gmail.com
• [PATCH 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD   shiva.linuxworks at gmail.com
• [PATCH 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices   shiva.linuxworks at gmail.com
• [PATCH 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode   shiva.linuxworks at gmail.com
• [PATCH 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices   shiva.linuxworks at gmail.com
• [PATCH 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies   shiva.linuxworks at gmail.com
• [PATCH v5 04/14] dtoc: add support to scan drivers   sjg at google.com
• [PATCH] ARM: Samsung: Add support for iTop-4412 based on Samsung Exynos4412   hyyoxhk
• [PATCH] config: Enable USB Keyboard suuport on RPi4 32 bit   matthias.bgg at kernel.org
• [PATCH v2 16/17] efi_loader: enable UEFI variables at runtime   ilias.apalodimas at linaro.org
• [PATCH v2 01/17] efi_loader: prepare for read only OP-TEE variables   ilias.apalodimas at linaro.org
• [PATCH v3 15/17] efi_loader: use memory based variable storage   ilias.apalodimas at linaro.org
• [PATCH 1/1] efi_loader: update secure state   ilias.apalodimas at linaro.org
• [PATCH 1/1] efi_loader: configuration of variables store   ilias.apalodimas at linaro.org
• [PATCH v2 1/1] efi_loader: update secure state   ilias.apalodimas at linaro.org
• [PATCH] efi_loader: Enable run-time variable support for tee based variables   ilias.apalodimas at linaro.org
• Debian boot failure with UEFI runtime variables enabled   ilias.apalodimas at linaro.org
• [PULL] u-boot-atmel-2020.10-a   Eugen.Hristev at microchip.com
• [PATCH 1/1] ls1088ardb :Set CONFIG_SYS_BOARD to ls1088ardb   jaiprakash.singh at nxp.com
• [PATCH v2 0/4] Support for specifying extra IOMMU mappings for PCI   laurentiu.tudor at nxp.com
• [PATCH v2 1/4] pci: layerscape: move per-pci device fdt fixup in a function   laurentiu.tudor at nxp.com
• [PATCH v2 2/4] pci: layerscape: move pci node search in a common function   laurentiu.tudor at nxp.com
• [PATCH v2 3/4] pci: add a few ARI and SRIOV related defines   laurentiu.tudor at nxp.com
• [PATCH v2 4/4] pci: layerscape: add a way of specifying additional iommu mappings   laurentiu.tudor at nxp.com
• [PATCH 1/2] Kconfig: add SPL_LOAD_FIT_ADDRESS   peng.fan at nxp.com
• [PATCH 2/2] configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigs   peng.fan at nxp.com
• [PATCH 00/11] imx8m: soc/clk update   peng.fan at nxp.com
• [PATCH 01/11] imx8m: configure arm clk sources from PLL   peng.fan at nxp.com
• [PATCH 02/11] imx8m: configure NoC clk   peng.fan at nxp.com
• [PATCH 03/11] imx8m: add sdhc/nand/ecspi clk api   peng.fan at nxp.com
• [PATCH 04/11] imx8m: add eqos clk   peng.fan at nxp.com
• [PATCH 05/11] imx8m: workaround ROM serror   peng.fan at nxp.com
• [PATCH 06/11] imx8mp: Add fused parts support   peng.fan at nxp.com
• [PATCH 07/11] imx8m: power down fused cores   peng.fan at nxp.com
• [PATCH 08/11] imx8mn/imx8mp: override env_get_offset and env_get_location   peng.fan at nxp.com
• [PATCH 09/11] imx8m: disable nodes before kernel/mfgtool boot for fused part   peng.fan at nxp.com
• [PATCH 10/11] clk: imx8m: drop clk settings   peng.fan at nxp.com
• [PATCH 11/11] imx8m: Refactor the OPTEE memory removal   peng.fan at nxp.com
• [PATCH 1/2] imx8m: implement armv8_el2_to_aarch32   peng.fan at nxp.com
• [PATCH 2/2] imx8mm_evk: enlarge CONFIG_SYS_BOOTM_LEN   peng.fan at nxp.com
• [PATCH] imx8m: enlarge CONFIG_SYS_BOOTM_LEN   peng.fan at nxp.com
• [PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH   wig.cheng at technexion.com
• [PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH   wig.cheng at technexion.com
• [PATCH v2] configs: pico-imx6: convert ethernet function to DM_ETH   wig.cheng at technexion.com
• [PATCH v1 1/3] configs: pico-imx6ul: convert DM_USB   wig.cheng at technexion.com
• [PATCH v1 2/3] configs: pico-imx6ul: convert DM_VIDEO   wig.cheng at technexion.com
• [PATCH v1 3/3] pico-imx6ul: convert ethernet function to DM_ETH   wig.cheng at technexion.com
• [PATCH v2 1/3] configs: pico-imx6ul: convert DM_USB   wig.cheng at technexion.com
• [PATCH v2 2/3] configs: pico-imx6ul: convert DM_VIDEO   wig.cheng at technexion.com
• [PATCH v2 3/3] pico-imx6ul: convert ethernet function to DM_ETH   wig.cheng at technexion.com
• [PATCH v1] test/py: Add test support for three stage boot   yan-liu at ti.com
• [PATCH v1 2/3] configs: pico-imx6ul: convert DM_VIDEO   wig
• [PATCH v1 3/3] pico-imx6ul: convert ethernet function to DM_ETH   wig
• [PATCH] Update Winbond SPI NOR Flash ID table   STLin2 at winbond.com
• [PATCH] Update Winbond SPI NOR Flash ID table   STLin2 at winbond.com
• chainload u-boot on a not supported android board   Дмитрий Санковский