[PATCH] power: axp209: Limit inrush current for A20-OLinuXino_MICRO

Jagan Teki jagan at amarulasolutions.com
Sat Jul 11 11:07:21 CEST 2020

On Tue, Jun 16, 2020 at 9:46 PM Cédric Félizard <cedric at felizard.fr> wrote:
> This commit enables the work done in commit ef52605e for the
> A20-OLinuXino_MICRO{,-eMMC} boards. It was previously used only for the
> A20-OLinuXino-Lime2{,-eMMC} boards but is also needed for the MICRO
> boards. Without this, the board consistently hangs upon reboot. Note
> that a cold boot works fine though.
> I don't have -eMMC board variant to double check but the quirk is most
> likely present as well so I patched
> configs/A20-OLinuXino_MICRO-eMMC_defconfig too.
> The issue occurs with revision G of the board and most likely previous
> revisions as well since the faulty capacitance on LDO3's output hasn't
> been modified since the initial release of the board.
> Many thanks to Marex in #u-boot @ irc.freenode.net for helping me
> debugging this.

Signed-by-off missing? please resend.

More information about the U-Boot mailing list