[PATCH v3 3/5] fu540: dtsi: add reset producer and consumer entries

[Pragnesh Patel]

>-----Original Message-----
>From: Sagar Kadam <sagar.kadam at sifive.com>
>Sent: 10 July 2020 14:08
>To: u-boot at lists.denx.de
>Cc: rick at andestech.com; Paul Walmsley ( Sifive)
><paul.walmsley at sifive.com>; palmer at dabbelt.com; anup.patel at wdc.com;
>atish.patra at wdc.com; lukma at denx.de; Pragnesh Patel
><pragnesh.patel at sifive.com>; bin.meng at windriver.com;
>jagan at amarulasolutions.com; sjg at chromium.org; twoerner at gmail.com;
>abrodkin at synopsys.com; Eugeniy.Paltsev at synopsys.com; patrick at blueri.se;
>weijie.gao at mediatek.com; festevam at gmail.com; Sagar Kadam
><sagar.kadam at sifive.com>
>Subject: [PATCH v3 3/5] fu540: dtsi: add reset producer and consumer entries
>
>The resets to DDR and ethernet sub-system are connected to PRCI device
>reset control register, these reset signals are active low and are held low at
>power-up. Add these reset producer and consumer details needed by the
>reset driver.
>
>Signed-off-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
>---
> arch/riscv/dts/fu540-c000-u-boot.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>

Reviewed-by: Pragnesh Patel <pragnesh.patel at sifive.com>