[PATCH v3 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data
Vignesh Raghavendra
vigneshr at ti.com
Tue Jul 7 10:13:34 CEST 2020
Update driver to use static PSIL endpoint Data instead of DT. This will
allow DT bindings to be in sync with kernel's DT.
Note that this patch breaks networking and OSPI boot as driver changes
are not backward compatible with existing DT. Subsequent commit will
update the DT to make it compatible with updated driver.
Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko at ti.com>
---
drivers/dma/ti/Kconfig | 1 +
drivers/dma/ti/k3-udma.c | 145 +++++++++++++++++++++++++++------------
2 files changed, 103 insertions(+), 43 deletions(-)
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index 9d7a1efb2b..9cbd5f334d 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -8,6 +8,7 @@ config TI_K3_NAVSS_UDMA
select DMA
select TI_K3_NAVSS_RINGACC
select TI_K3_NAVSS_PSILCFG
+ select TI_K3_PSIL
default n
help
Support for UDMA used in K3 devices.
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 2ce16c8e27..5fc8692e19 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -22,7 +22,6 @@
#include <dma.h>
#include <dma-uclass.h>
#include <linux/delay.h>
-#include <dt-bindings/dma/k3-udma.h>
#include <linux/bitmap.h>
#include <linux/err.h>
#include <linux/soc/ti/k3-navss-ringacc.h>
@@ -31,6 +30,7 @@
#include <linux/soc/ti/ti_sci_protocol.h>
#include "k3-udma-hwdef.h"
+#include "k3-psil-priv.h"
#if BITS_PER_LONG == 64
#define RINGACC_RING_USE_PROXY (0)
@@ -69,6 +69,21 @@ struct udma_rchan {
struct k3_nav_ring *r_ring; /* Receive ring*/
};
+#define UDMA_FLAG_PDMA_ACC32 BIT(0)
+#define UDMA_FLAG_PDMA_BURST BIT(1)
+#define UDMA_FLAG_TDTYPE BIT(2)
+
+struct udma_match_data {
+ u32 psil_base;
+ bool enable_memcpy_support;
+ u32 flags;
+ u32 statictr_z_mask;
+ u32 rchan_oes_offset;
+
+ u8 tpl_levels;
+ u32 level_start_idx[];
+};
+
struct udma_rflow {
int id;
};
@@ -114,6 +129,8 @@ struct udma_dev {
struct udma_rchan *rchans;
struct udma_rflow *rflows;
+ struct udma_match_data *match_data;
+
struct udma_chan *channels;
u32 psil_base;
@@ -1293,12 +1310,8 @@ static int udma_probe(struct udevice *dev)
if (IS_ERR(ud->ringacc))
return PTR_ERR(ud->ringacc);
- ud->psil_base = dev_read_u32_default(dev, "ti,psil-base", 0);
- if (!ud->psil_base) {
- dev_info(dev,
- "Missing ti,psil-base property, using %d.\n", ret);
- return -EINVAL;
- }
+ ud->match_data = (void *)dev_get_driver_data(dev);
+ ud->psil_base = ud->match_data->psil_base;
ret = uclass_get_device_by_phandle(UCLASS_FIRMWARE, dev,
"ti,sci", &tisci_dev);
@@ -1723,8 +1736,7 @@ static int udma_of_xlate(struct dma *dma, struct ofnode_phandle_args *args)
{
struct udma_dev *ud = dev_get_priv(dma->dev);
struct udma_chan *uc = &ud->channels[0];
- ofnode chconf_node, slave_node;
- char prop[50];
+ struct psil_endpoint_config *ep_config;
u32 val;
for (val = 0; val < ud->ch_count; val++) {
@@ -1736,42 +1748,26 @@ static int udma_of_xlate(struct dma *dma, struct ofnode_phandle_args *args)
if (val == ud->ch_count)
return -EBUSY;
- uc->dir = DMA_DEV_TO_MEM;
- if (args->args[2] == UDMA_DIR_TX)
+ uc->slave_thread_id = args->args[0];
+ if (uc->slave_thread_id & K3_PSIL_DST_THREAD_ID_OFFSET)
uc->dir = DMA_MEM_TO_DEV;
+ else
+ uc->dir = DMA_DEV_TO_MEM;
- slave_node = ofnode_get_by_phandle(args->args[0]);
- if (!ofnode_valid(slave_node)) {
- dev_err(ud->dev, "slave node is missing\n");
- return -EINVAL;
- }
-
- snprintf(prop, sizeof(prop), "ti,psil-config%u", args->args[1]);
- chconf_node = ofnode_find_subnode(slave_node, prop);
- if (!ofnode_valid(chconf_node)) {
- dev_err(ud->dev, "Channel configuration node is missing\n");
- return -EINVAL;
- }
-
- if (!ofnode_read_u32(chconf_node, "linux,udma-mode", &val)) {
- if (val == UDMA_PKT_MODE)
- uc->pkt_mode = true;
+ ep_config = psil_get_ep_config(uc->slave_thread_id);
+ if (IS_ERR(ep_config)) {
+ dev_err(ud->dev, "No configuration for psi-l thread 0x%04x\n",
+ uc->slave_thread_id);
+ uc->dir = DMA_MEM_TO_MEM;
+ uc->slave_thread_id = -1;
+ return false;
}
- if (!ofnode_read_u32(chconf_node, "statictr-type", &val))
- uc->static_tr_type = val;
+ uc->pkt_mode = ep_config->pkt_mode;
- uc->needs_epib = ofnode_read_bool(chconf_node, "ti,needs-epib");
- if (!ofnode_read_u32(chconf_node, "ti,psd-size", &val))
- uc->psd_size = val;
- uc->metadata_size = (uc->needs_epib ? 16 : 0) + uc->psd_size;
-
- if (ofnode_read_u32(slave_node, "ti,psil-base", &val)) {
- dev_err(ud->dev, "ti,psil-base is missing\n");
- return -EINVAL;
- }
-
- uc->slave_thread_id = val + args->args[1];
+ uc->needs_epib = ep_config->needs_epib;
+ uc->psd_size = ep_config->psd_size;
+ uc->metadata_size = (uc->needs_epib ? CPPI5_INFO0_HDESC_EPIB_SIZE : 0) + uc->psd_size;
dma->id = uc->id;
pr_debug("Allocated dma chn:%lu epib:%d psdata:%u meta:%u thread_id:%x\n",
@@ -1859,10 +1855,73 @@ static const struct dma_ops udma_ops = {
.get_cfg = udma_get_cfg,
};
+static struct udma_match_data am654_main_data = {
+ .psil_base = 0x1000,
+ .enable_memcpy_support = true,
+ .statictr_z_mask = GENMASK(11, 0),
+ .rchan_oes_offset = 0x200,
+ .tpl_levels = 2,
+ .level_start_idx = {
+ [0] = 8, /* Normal channels */
+ [1] = 0, /* High Throughput channels */
+ },
+};
+
+static struct udma_match_data am654_mcu_data = {
+ .psil_base = 0x6000,
+ .enable_memcpy_support = true,
+ .statictr_z_mask = GENMASK(11, 0),
+ .rchan_oes_offset = 0x200,
+ .tpl_levels = 2,
+ .level_start_idx = {
+ [0] = 2, /* Normal channels */
+ [1] = 0, /* High Throughput channels */
+ },
+};
+
+static struct udma_match_data j721e_main_data = {
+ .psil_base = 0x1000,
+ .enable_memcpy_support = true,
+ .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
+ .statictr_z_mask = GENMASK(23, 0),
+ .rchan_oes_offset = 0x400,
+ .tpl_levels = 3,
+ .level_start_idx = {
+ [0] = 16, /* Normal channels */
+ [1] = 4, /* High Throughput channels */
+ [2] = 0, /* Ultra High Throughput channels */
+ },
+};
+
+static struct udma_match_data j721e_mcu_data = {
+ .psil_base = 0x6000,
+ .enable_memcpy_support = true,
+ .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
+ .statictr_z_mask = GENMASK(23, 0),
+ .rchan_oes_offset = 0x400,
+ .tpl_levels = 2,
+ .level_start_idx = {
+ [0] = 2, /* Normal channels */
+ [1] = 0, /* High Throughput channels */
+ },
+};
+
static const struct udevice_id udma_ids[] = {
- { .compatible = "ti,k3-navss-udmap" },
- { .compatible = "ti,j721e-navss-mcu-udmap" },
- { }
+ {
+ .compatible = "ti,am654-navss-main-udmap",
+ .data = (ulong)&am654_main_data,
+ },
+ {
+ .compatible = "ti,am654-navss-mcu-udmap",
+ .data = (ulong)&am654_mcu_data,
+ }, {
+ .compatible = "ti,j721e-navss-main-udmap",
+ .data = (ulong)&j721e_main_data,
+ }, {
+ .compatible = "ti,j721e-navss-mcu-udmap",
+ .data = (ulong)&j721e_mcu_data,
+ },
+ { /* Sentinel */ },
};
U_BOOT_DRIVER(ti_edma3) = {
--
2.27.0
More information about the U-Boot
mailing list