[PATCH v2 01/17] efi_loader: prepare for read only OP-TEE variables
ilias.apalodimas at linaro.org
ilias.apalodimas at linaro.org
Tue Jul 7 15:24:17 CEST 2020
Hi Heinrich,
the TEE side looks fine to me, but I can't apply this to current master
Thanks
/Ilias
On Tue, Jul 07, 2020 at 05:11:44AM +0200, Heinrich Schuchardt wrote:
> We currently have two implementations of UEFI variables:
>
> * variables provided via an OP-TEE module
> * variables stored in the U-Boot environment
>
> Read only variables are up to now only implemented in the U-Boot
> environment implementation.
>
> Provide a common interface for both implementations that allows handling
> read-only variables.
>
> As variable access is limited to very few source files put variable
> related definitions into new include efi_variable.h instead of efi_loader.
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
> doc/api/efi.rst | 2 +
> include/efi_variable.h | 43 ++++++++
> lib/efi_loader/Makefile | 1 +
> lib/efi_loader/efi_var_common.c | 78 +++++++++++++
> lib/efi_loader/efi_variable.c | 175 ++++++++----------------------
> lib/efi_loader/efi_variable_tee.c | 75 ++++---------
> 6 files changed, 193 insertions(+), 181 deletions(-)
> create mode 100644 include/efi_variable.h
> create mode 100644 lib/efi_loader/efi_var_common.c
>
> diff --git a/doc/api/efi.rst b/doc/api/efi.rst
> index d5114f05b3..cb2a1c897e 100644
> --- a/doc/api/efi.rst
> +++ b/doc/api/efi.rst
> @@ -93,6 +93,8 @@ Runtime services
> Variable services
> ~~~~~~~~~~~~~~~~~
>
> +.. kernel-doc:: include/efi_variable.h
> + :internal:
> .. kernel-doc:: lib/efi_loader/efi_variable.c
> :internal:
>
> diff --git a/include/efi_variable.h b/include/efi_variable.h
> new file mode 100644
> index 0000000000..6789118eba
> --- /dev/null
> +++ b/include/efi_variable.h
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) 2020, Heinrich Schuchardt <xypron.glpk at gmx.de>
> + */
> +
> +#ifndef _EFI_VARIABLE_H
> +#define _EFI_VARIABLE_H
> +
> +#include <linux/bitops.h>
> +
> +#define EFI_VARIABLE_READ_ONLY BIT(31)
> +
> +/**
> + * efi_get_variable() - retrieve value of a UEFI variable
> + *
> + * @variable_name: name of the variable
> + * @vendor: vendor GUID
> + * @attributes: attributes of the variable
> + * @data_size: size of the buffer to which the variable value is copied
> + * @data: buffer to which the variable value is copied
> + * @timep: authentication time (seconds since start of epoch)
> + * Return: status code
> + */
> +efi_status_t efi_get_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 *attributes, efi_uintn_t *data_size,
> + void *data, u64 *timep);
> +
> +/**
> + * efi_set_variable() - set value of a UEFI variable
> + *
> + * @variable_name: name of the variable
> + * @vendor: vendor GUID
> + * @attributes: attributes of the variable
> + * @data_size: size of the buffer with the variable value
> + * @data: buffer with the variable value
> + * @ro_check: check the read only read only bit in attributes
> + * Return: status code
> + */
> +efi_status_t efi_set_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 attributes, efi_uintn_t data_size,
> + const void *data, bool ro_check);
> +
> +#endif
> diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
> index 57c7e66ea0..7eddd7ef37 100644
> --- a/lib/efi_loader/Makefile
> +++ b/lib/efi_loader/Makefile
> @@ -35,6 +35,7 @@ obj-y += efi_root_node.o
> obj-y += efi_runtime.o
> obj-y += efi_setup.o
> obj-$(CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2) += efi_unicode_collation.o
> +obj-y += efi_var_common.o
> ifeq ($(CONFIG_EFI_MM_COMM_TEE),y)
> obj-y += efi_variable_tee.o
> else
> diff --git a/lib/efi_loader/efi_var_common.c b/lib/efi_loader/efi_var_common.c
> new file mode 100644
> index 0000000000..6a4efa3f27
> --- /dev/null
> +++ b/lib/efi_loader/efi_var_common.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * UEFI runtime variable services
> + *
> + * Copyright (c) 2020, Heinrich Schuchardt <xypron.glpk at gmx.de>
> + */
> +
> +#include <common.h>
> +#include <efi_loader.h>
> +#include <efi_variable.h>
> +
> +/**
> + * efi_efi_get_variable() - retrieve value of a UEFI variable
> + *
> + * This function implements the GetVariable runtime service.
> + *
> + * See the Unified Extensible Firmware Interface (UEFI) specification for
> + * details.
> + *
> + * @variable_name: name of the variable
> + * @vendor: vendor GUID
> + * @attributes: attributes of the variable
> + * @data_size: size of the buffer to which the variable value is copied
> + * @data: buffer to which the variable value is copied
> + * Return: status code
> + */
> +efi_status_t EFIAPI efi_get_variable(u16 *variable_name,
> + const efi_guid_t *vendor, u32 *attributes,
> + efi_uintn_t *data_size, void *data)
> +{
> + efi_status_t ret;
> +
> + EFI_ENTRY("\"%ls\" %pUl %p %p %p", variable_name, vendor, attributes,
> + data_size, data);
> +
> + ret = efi_get_variable_int(variable_name, vendor, attributes,
> + data_size, data, NULL);
> +
> + /* Remove EFI_VARIABLE_READ_ONLY flag */
> + if (attributes)
> + *attributes &= EFI_VARIABLE_MASK;
> +
> + return EFI_EXIT(ret);
> +}
> +
> +/**
> + * efi_set_variable() - set value of a UEFI variable
> + *
> + * This function implements the SetVariable runtime service.
> + *
> + * See the Unified Extensible Firmware Interface (UEFI) specification for
> + * details.
> + *
> + * @variable_name: name of the variable
> + * @vendor: vendor GUID
> + * @attributes: attributes of the variable
> + * @data_size: size of the buffer with the variable value
> + * @data: buffer with the variable value
> + * Return: status code
> + */
> +efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
> + const efi_guid_t *vendor, u32 attributes,
> + efi_uintn_t data_size, const void *data)
> +{
> + efi_status_t ret;
> +
> + EFI_ENTRY("\"%ls\" %pUl %x %zu %p", variable_name, vendor, attributes,
> + data_size, data);
> +
> + /* Make sure that the EFI_VARIABLE_READ_ONLY flag is not set */
> + if (attributes & ~(u32)EFI_VARIABLE_MASK)
> + ret = EFI_INVALID_PARAMETER;
> + else
> + ret = efi_set_variable_int(variable_name, vendor, attributes,
> + data_size, data, true);
> +
> + return EFI_EXIT(ret);
> +}
> diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
> index efaba869ef..6ec1f97326 100644
> --- a/lib/efi_loader/efi_variable.c
> +++ b/lib/efi_loader/efi_variable.c
> @@ -7,6 +7,7 @@
>
> #include <common.h>
> #include <efi_loader.h>
> +#include <efi_variable.h>
> #include <env.h>
> #include <env_internal.h>
> #include <hexdump.h>
> @@ -15,7 +16,6 @@
> #include <search.h>
> #include <uuid.h>
> #include <crypto/pkcs7_parser.h>
> -#include <linux/bitops.h>
> #include <linux/compat.h>
> #include <u-boot/crc.h>
>
> @@ -30,21 +30,6 @@ static bool efi_secure_boot;
> static enum efi_secure_mode efi_secure_mode;
> static u8 efi_vendor_keys;
>
> -#define READ_ONLY BIT(31)
> -
> -static efi_status_t efi_get_variable_common(u16 *variable_name,
> - const efi_guid_t *vendor,
> - u32 *attributes,
> - efi_uintn_t *data_size, void *data,
> - u64 *timep);
> -
> -static efi_status_t efi_set_variable_common(u16 *variable_name,
> - const efi_guid_t *vendor,
> - u32 attributes,
> - efi_uintn_t data_size,
> - const void *data,
> - bool ro_check);
> -
> /*
> * Mapping between EFI variables and u-boot variables:
> *
> @@ -155,7 +140,7 @@ static const char *parse_attr(const char *str, u32 *attrp, u64 *timep)
> str++;
>
> if ((s = prefix(str, "ro"))) {
> - attr |= READ_ONLY;
> + attr |= EFI_VARIABLE_READ_ONLY;
> } else if ((s = prefix(str, "nv"))) {
> attr |= EFI_VARIABLE_NON_VOLATILE;
> } else if ((s = prefix(str, "boot"))) {
> @@ -203,29 +188,29 @@ static efi_status_t efi_set_secure_state(u8 secure_boot, u8 setup_mode,
>
> attributes = EFI_VARIABLE_BOOTSERVICE_ACCESS |
> EFI_VARIABLE_RUNTIME_ACCESS |
> - READ_ONLY;
> - ret = efi_set_variable_common(L"SecureBoot", &efi_global_variable_guid,
> - attributes, sizeof(secure_boot),
> - &secure_boot, false);
> + EFI_VARIABLE_READ_ONLY;
> + ret = efi_set_variable_int(L"SecureBoot", &efi_global_variable_guid,
> + attributes, sizeof(secure_boot),
> + &secure_boot, false);
> if (ret != EFI_SUCCESS)
> goto err;
>
> - ret = efi_set_variable_common(L"SetupMode", &efi_global_variable_guid,
> - attributes, sizeof(setup_mode),
> - &setup_mode, false);
> + ret = efi_set_variable_int(L"SetupMode", &efi_global_variable_guid,
> + attributes, sizeof(setup_mode),
> + &setup_mode, false);
> if (ret != EFI_SUCCESS)
> goto err;
>
> - ret = efi_set_variable_common(L"AuditMode", &efi_global_variable_guid,
> - attributes, sizeof(audit_mode),
> - &audit_mode, false);
> + ret = efi_set_variable_int(L"AuditMode", &efi_global_variable_guid,
> + attributes, sizeof(audit_mode),
> + &audit_mode, false);
> if (ret != EFI_SUCCESS)
> goto err;
>
> - ret = efi_set_variable_common(L"DeployedMode",
> - &efi_global_variable_guid, attributes,
> - sizeof(deployed_mode), &deployed_mode,
> - false);
> + ret = efi_set_variable_int(L"DeployedMode",
> + &efi_global_variable_guid, attributes,
> + sizeof(deployed_mode), &deployed_mode,
> + false);
> err:
> return ret;
> }
> @@ -235,7 +220,7 @@ err:
> * @mode: new state
> *
> * Depending on @mode, secure boot related variables are updated.
> - * Those variables are *read-only* for users, efi_set_variable_common()
> + * Those variables are *read-only* for users, efi_set_variable_int()
> * is called here.
> *
> * Return: status code
> @@ -254,10 +239,10 @@ static efi_status_t efi_transfer_secure_state(enum efi_secure_mode mode)
>
> efi_secure_boot = true;
> } else if (mode == EFI_MODE_AUDIT) {
> - ret = efi_set_variable_common(L"PK", &efi_global_variable_guid,
> - EFI_VARIABLE_BOOTSERVICE_ACCESS |
> - EFI_VARIABLE_RUNTIME_ACCESS,
> - 0, NULL, false);
> + ret = efi_set_variable_int(L"PK", &efi_global_variable_guid,
> + EFI_VARIABLE_BOOTSERVICE_ACCESS |
> + EFI_VARIABLE_RUNTIME_ACCESS,
> + 0, NULL, false);
> if (ret != EFI_SUCCESS)
> goto err;
>
> @@ -309,8 +294,8 @@ static efi_status_t efi_init_secure_state(void)
> */
>
> size = 0;
> - ret = efi_get_variable_common(L"PK", &efi_global_variable_guid,
> - NULL, &size, NULL, NULL);
> + ret = efi_get_variable_int(L"PK", &efi_global_variable_guid,
> + NULL, &size, NULL, NULL);
> if (ret == EFI_BUFFER_TOO_SMALL) {
> if (IS_ENABLED(CONFIG_EFI_SECURE_BOOT))
> mode = EFI_MODE_USER;
> @@ -327,13 +312,13 @@ static efi_status_t efi_init_secure_state(void)
>
> ret = efi_transfer_secure_state(mode);
> if (ret == EFI_SUCCESS)
> - ret = efi_set_variable_common(L"VendorKeys",
> - &efi_global_variable_guid,
> - EFI_VARIABLE_BOOTSERVICE_ACCESS |
> - EFI_VARIABLE_RUNTIME_ACCESS |
> - READ_ONLY,
> - sizeof(efi_vendor_keys),
> - &efi_vendor_keys, false);
> + ret = efi_set_variable_int(L"VendorKeys",
> + &efi_global_variable_guid,
> + EFI_VARIABLE_BOOTSERVICE_ACCESS |
> + EFI_VARIABLE_RUNTIME_ACCESS |
> + EFI_VARIABLE_READ_ONLY,
> + sizeof(efi_vendor_keys),
> + &efi_vendor_keys, false);
>
> err:
> return ret;
> @@ -599,11 +584,9 @@ static efi_status_t efi_variable_authenticate(u16 *variable,
> }
> #endif /* CONFIG_EFI_SECURE_BOOT */
>
> -static efi_status_t efi_get_variable_common(u16 *variable_name,
> - const efi_guid_t *vendor,
> - u32 *attributes,
> - efi_uintn_t *data_size, void *data,
> - u64 *timep)
> +efi_status_t efi_get_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 *attributes, efi_uintn_t *data_size,
> + void *data, u64 *timep)
> {
> char *native_name;
> efi_status_t ret;
> @@ -684,40 +667,11 @@ static efi_status_t efi_get_variable_common(u16 *variable_name,
>
> out:
> if (attributes)
> - *attributes = attr & EFI_VARIABLE_MASK;
> + *attributes = attr;
>
> return ret;
> }
>
> -/**
> - * efi_efi_get_variable() - retrieve value of a UEFI variable
> - *
> - * This function implements the GetVariable runtime service.
> - *
> - * See the Unified Extensible Firmware Interface (UEFI) specification for
> - * details.
> - *
> - * @variable_name: name of the variable
> - * @vendor: vendor GUID
> - * @attributes: attributes of the variable
> - * @data_size: size of the buffer to which the variable value is copied
> - * @data: buffer to which the variable value is copied
> - * Return: status code
> - */
> -efi_status_t EFIAPI efi_get_variable(u16 *variable_name,
> - const efi_guid_t *vendor, u32 *attributes,
> - efi_uintn_t *data_size, void *data)
> -{
> - efi_status_t ret;
> -
> - EFI_ENTRY("\"%ls\" %pUl %p %p %p", variable_name, vendor, attributes,
> - data_size, data);
> -
> - ret = efi_get_variable_common(variable_name, vendor, attributes,
> - data_size, data, NULL);
> - return EFI_EXIT(ret);
> -}
> -
> static char *efi_variables_list;
> static char *efi_cur_variable;
>
> @@ -881,12 +835,9 @@ efi_status_t EFIAPI efi_get_next_variable_name(efi_uintn_t *variable_name_size,
> return EFI_EXIT(ret);
> }
>
> -static efi_status_t efi_set_variable_common(u16 *variable_name,
> - const efi_guid_t *vendor,
> - u32 attributes,
> - efi_uintn_t data_size,
> - const void *data,
> - bool ro_check)
> +efi_status_t efi_set_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 attributes, efi_uintn_t data_size,
> + const void *data, bool ro_check)
> {
> char *native_name = NULL, *old_data = NULL, *val = NULL, *s;
> efi_uintn_t old_size;
> @@ -909,15 +860,15 @@ static efi_status_t efi_set_variable_common(u16 *variable_name,
> /* check if a variable exists */
> old_size = 0;
> attr = 0;
> - ret = efi_get_variable_common(variable_name, vendor, &attr,
> - &old_size, NULL, &time);
> + ret = efi_get_variable_int(variable_name, vendor, &attr,
> + &old_size, NULL, &time);
> append = !!(attributes & EFI_VARIABLE_APPEND_WRITE);
> attributes &= ~(u32)EFI_VARIABLE_APPEND_WRITE;
> delete = !append && (!data_size || !attributes);
>
> /* check attributes */
> if (old_size) {
> - if (ro_check && (attr & READ_ONLY)) {
> + if (ro_check && (attr & EFI_VARIABLE_READ_ONLY)) {
> ret = EFI_WRITE_PROTECTED;
> goto err;
> }
> @@ -925,8 +876,8 @@ static efi_status_t efi_set_variable_common(u16 *variable_name,
> /* attributes won't be changed */
> if (!delete &&
> ((ro_check && attr != attributes) ||
> - (!ro_check && ((attr & ~(u32)READ_ONLY)
> - != (attributes & ~(u32)READ_ONLY))))) {
> + (!ro_check && ((attr & ~(u32)EFI_VARIABLE_READ_ONLY)
> + != (attributes & ~(u32)EFI_VARIABLE_READ_ONLY))))) {
> ret = EFI_INVALID_PARAMETER;
> goto err;
> }
> @@ -1000,8 +951,8 @@ static efi_status_t efi_set_variable_common(u16 *variable_name,
> ret = EFI_OUT_OF_RESOURCES;
> goto err;
> }
> - ret = efi_get_variable_common(variable_name, vendor,
> - &attr, &old_size, old_data, NULL);
> + ret = efi_get_variable_int(variable_name, vendor,
> + &attr, &old_size, old_data, NULL);
> if (ret != EFI_SUCCESS)
> goto err;
> } else {
> @@ -1021,7 +972,7 @@ static efi_status_t efi_set_variable_common(u16 *variable_name,
> /*
> * store attributes
> */
> - attributes &= (READ_ONLY |
> + attributes &= (EFI_VARIABLE_READ_ONLY |
> EFI_VARIABLE_NON_VOLATILE |
> EFI_VARIABLE_BOOTSERVICE_ACCESS |
> EFI_VARIABLE_RUNTIME_ACCESS |
> @@ -1030,7 +981,7 @@ static efi_status_t efi_set_variable_common(u16 *variable_name,
> while (attributes) {
> attr = 1 << (ffs(attributes) - 1);
>
> - if (attr == READ_ONLY) {
> + if (attr == EFI_VARIABLE_READ_ONLY) {
> s += sprintf(s, "ro");
> } else if (attr == EFI_VARIABLE_NON_VOLATILE) {
> s += sprintf(s, "nv");
> @@ -1084,12 +1035,12 @@ out:
> /* update VendorKeys */
> if (vendor_keys_modified & efi_vendor_keys) {
> efi_vendor_keys = 0;
> - ret = efi_set_variable_common(
> + ret = efi_set_variable_int(
> L"VendorKeys",
> &efi_global_variable_guid,
> EFI_VARIABLE_BOOTSERVICE_ACCESS
> | EFI_VARIABLE_RUNTIME_ACCESS
> - | READ_ONLY,
> + | EFI_VARIABLE_READ_ONLY,
> sizeof(efi_vendor_keys),
> &efi_vendor_keys,
> false);
> @@ -1106,36 +1057,6 @@ err:
> return ret;
> }
>
> -/**
> - * efi_set_variable() - set value of a UEFI variable
> - *
> - * This function implements the SetVariable runtime service.
> - *
> - * See the Unified Extensible Firmware Interface (UEFI) specification for
> - * details.
> - *
> - * @variable_name: name of the variable
> - * @vendor: vendor GUID
> - * @attributes: attributes of the variable
> - * @data_size: size of the buffer with the variable value
> - * @data: buffer with the variable value
> - * Return: status code
> - */
> -efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
> - const efi_guid_t *vendor, u32 attributes,
> - efi_uintn_t data_size, const void *data)
> -{
> - EFI_ENTRY("\"%ls\" %pUl %x %zu %p", variable_name, vendor, attributes,
> - data_size, data);
> -
> - /* READ_ONLY bit is not part of API */
> - attributes &= ~(u32)READ_ONLY;
> -
> - return EFI_EXIT(efi_set_variable_common(variable_name, vendor,
> - attributes, data_size, data,
> - true));
> -}
> -
> /**
> * efi_query_variable_info() - get information about EFI variables
> *
> diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c
> index cacc76e23d..d5a28163f5 100644
> --- a/lib/efi_loader/efi_variable_tee.c
> +++ b/lib/efi_loader/efi_variable_tee.c
> @@ -10,6 +10,7 @@
> #include <efi.h>
> #include <efi_api.h>
> #include <efi_loader.h>
> +#include <efi_variable.h>
> #include <tee.h>
> #include <malloc.h>
> #include <mm_communication.h>
> @@ -243,24 +244,9 @@ out:
> return ret;
> }
>
> -/**
> - * efi_get_variable() - retrieve value of a UEFI variable
> - *
> - * This function implements the GetVariable runtime service.
> - *
> - * See the Unified Extensible Firmware Interface (UEFI) specification for
> - * details.
> - *
> - * @name: name of the variable
> - * @guid: vendor GUID
> - * @attr: attributes of the variable
> - * @data_size: size of the buffer to which the variable value is copied
> - * @data: buffer to which the variable value is copied
> - * Return: status code
> - */
> -efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid,
> - u32 *attr, efi_uintn_t *data_size,
> - void *data)
> +efi_status_t efi_get_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 *attributes, efi_uintn_t *data_size,
> + void *data, u64 *timep)
> {
> struct smm_variable_access *var_acc;
> efi_uintn_t payload_size;
> @@ -269,15 +255,13 @@ efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid,
> u8 *comm_buf = NULL;
> efi_status_t ret;
>
> - EFI_ENTRY("\"%ls\" %pUl %p %p %p", name, guid, attr, data_size, data);
> -
> - if (!name || !guid || !data_size) {
> + if (!variable_name || !vendor || !data_size) {
> ret = EFI_INVALID_PARAMETER;
> goto out;
> }
>
> /* Check payload size */
> - name_size = u16_strsize(name);
> + name_size = u16_strsize(variable_name);
> if (name_size > max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) {
> ret = EFI_INVALID_PARAMETER;
> goto out;
> @@ -300,11 +284,11 @@ efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid,
> goto out;
>
> /* Fill in contents */
> - guidcpy(&var_acc->guid, guid);
> + guidcpy(&var_acc->guid, vendor);
> var_acc->data_size = tmp_dsize;
> var_acc->name_size = name_size;
> - var_acc->attr = attr ? *attr : 0;
> - memcpy(var_acc->name, name, name_size);
> + var_acc->attr = attributes ? *attributes : 0;
> + memcpy(var_acc->name, variable_name, name_size);
>
> /* Communicate */
> ret = mm_communicate(comm_buf, payload_size);
> @@ -315,8 +299,8 @@ efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid,
> if (ret != EFI_SUCCESS)
> goto out;
>
> - if (attr)
> - *attr = var_acc->attr;
> + if (attributes)
> + *attributes = var_acc->attr;
> if (data)
> memcpy(data, (u8 *)var_acc->name + var_acc->name_size,
> var_acc->data_size);
> @@ -325,7 +309,7 @@ efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid,
>
> out:
> free(comm_buf);
> - return EFI_EXIT(ret);
> + return ret;
> }
>
> /**
> @@ -417,24 +401,9 @@ out:
> return EFI_EXIT(ret);
> }
>
> -/**
> - * efi_set_variable() - set value of a UEFI variable
> - *
> - * This function implements the SetVariable runtime service.
> - *
> - * See the Unified Extensible Firmware Interface (UEFI) specification for
> - * details.
> - *
> - * @name: name of the variable
> - * @guid: vendor GUID
> - * @attr: attributes of the variable
> - * @data_size: size of the buffer with the variable value
> - * @data: buffer with the variable value
> - * Return: status code
> - */
> -efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid,
> - u32 attr, efi_uintn_t data_size,
> - const void *data)
> +efi_status_t efi_set_variable_int(u16 *variable_name, const efi_guid_t *vendor,
> + u32 attributes, efi_uintn_t data_size,
> + const void *data, bool ro_check)
> {
> struct smm_variable_access *var_acc;
> efi_uintn_t payload_size;
> @@ -442,9 +411,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid,
> u8 *comm_buf = NULL;
> efi_status_t ret;
>
> - EFI_ENTRY("\"%ls\" %pUl %x %zu %p", name, guid, attr, data_size, data);
> -
> - if (!name || name[0] == 0 || !guid) {
> + if (!variable_name || variable_name[0] == 0 || !vendor) {
> ret = EFI_INVALID_PARAMETER;
> goto out;
> }
> @@ -454,7 +421,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid,
> }
>
> /* Check payload size */
> - name_size = u16_strsize(name);
> + name_size = u16_strsize(variable_name);
> payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + data_size;
> if (payload_size > max_payload_size) {
> ret = EFI_INVALID_PARAMETER;
> @@ -468,11 +435,11 @@ efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid,
> goto out;
>
> /* Fill in contents */
> - guidcpy(&var_acc->guid, guid);
> + guidcpy(&var_acc->guid, vendor);
> var_acc->data_size = data_size;
> var_acc->name_size = name_size;
> - var_acc->attr = attr;
> - memcpy(var_acc->name, name, name_size);
> + var_acc->attr = attributes;
> + memcpy(var_acc->name, variable_name, name_size);
> memcpy((u8 *)var_acc->name + name_size, data, data_size);
>
> /* Communicate */
> @@ -480,7 +447,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid,
>
> out:
> free(comm_buf);
> - return EFI_EXIT(ret);
> + return ret;
> }
>
> /**
> --
> 2.27.0
>
More information about the U-Boot
mailing list