[PATCH v3 43/49] rockchip: Convert evb-rk3288 over to use binman

[Simon Glass]

At present this board uses a custom script to produce the .its file.
Update it to use binman instead. Binman can create all the images that
are needed.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Drop use of rk322x.dtsi
- Add changes to rk3288-u-boot.dtsi instead

 Kconfig                         |  2 +-
 arch/arm/dts/rk3288-u-boot.dtsi | 54 +++++++++++++++++++++++++++++++++
 configs/evb-rk3288_defconfig    |  2 +-
 3 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/Kconfig b/Kconfig
index 893ea35ea8..0dfe2676de 100644
--- a/Kconfig
+++ b/Kconfig
@@ -321,7 +321,7 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+	default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
 				ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
 	default "u-boot.kwb" if ARCH_KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
index e4e762aabf..3b693a1257 100644
--- a/arch/arm/dts/rk3288-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-u-boot.dtsi
@@ -33,6 +33,60 @@
 		fdtmap {
 		};
 	};
+
+	itb {
+		filename = "u-boot.itb";
+		fit {
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+			description = "FIT image with OP-TEE support";
+			#address-cells = <1>;
+
+			images {
+				uboot {
+					description = "U-Boot";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					u-boot-nodtb {
+					};
+				};
+				optee {
+					description = "OP-TEE";
+					type = "firmware";
+					arch = "arm";
+					os = "tee";
+					compression = "none";
+					load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+					entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+
+					blob-ext {
+						filename = "tee.bin";
+					};
+				};
+				fdt {
+					description = CONFIG_SYS_BOARD;
+					type = "flat_dt";
+					compression = "none";
+
+					u-boot-dtb {
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+				conf {
+					description = CONFIG_SYS_BOARD;
+					firmware = "optee";
+					loadables = "uboot";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
 };
 #endif
 
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
index 350189fc63..cd03767bd5 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288_defconfig
@@ -14,7 +14,7 @@ CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_USE_PREBOOT=y
 CONFIG_SILENT_CONSOLE=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
-- 
2.27.0.389.gc38d7665816-goog