[PATCH v2 09/12] rockchip: rock-pi-n8: Enable on board devices

Kever Yang kever.yang at rock-chips.com
Wed Jul 22 14:30:58 CEST 2020


On 2020/7/21 下午11:24, Jagan Teki wrote:
> From: Suniel Mahesh <sunil at amarulasolutions.com>
>
> Enable common on board devices for ROCKPi N8.
>
> - USB 2.0 Host
> - USB 2.0 OTG/Gadget
> - HDMI Out
>
> Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - squash common device enablement
>
>   configs/rock-pi-n8-rk3288_defconfig | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
>
> diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig
> index 6b31e19eda..d218852d79 100644
> --- a/configs/rock-pi-n8-rk3288_defconfig
> +++ b/configs/rock-pi-n8-rk3288_defconfig
> @@ -11,8 +11,10 @@ CONFIG_NR_DRAM_BANKS=1
>   CONFIG_DEBUG_UART_BASE=0xff690000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_DEBUG_UART=y
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
>   CONFIG_USE_PREBOOT=y
>   CONFIG_SILENT_CONSOLE=y
> +# CONFIG_CONSOLE_MUX is not set
>   CONFIG_DEFAULT_FDT_FILE="rk3288-rock-pi-n8.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_STACK_R=y
> @@ -22,6 +24,7 @@ CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_CACHE=y
>   CONFIG_CMD_TIME=y
> @@ -63,4 +66,17 @@ CONFIG_RAM=y
>   CONFIG_SPL_RAM=y
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_ROCKCHIP_USB2_PHY=y
> +CONFIG_USB_KEYBOARD=y
> +# CONFIG_USB_KEYBOARD_FN_KEYS is not set
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
>   CONFIG_ERRNO_STR=y




More information about the U-Boot mailing list