[PATCH] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Fri Jul 10 15:59:59 CEST 2020
Hi,
On Tue, Nov 05, 2019 at 09:02:28PM +0530, Manivannan Sadhasivam wrote:
> This commit adds initial board support for iMX8QXP AI_ML board from
> Einfochips. This board is one of the 96Boards Consumer Edition and AI
> boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale.
>
> This initial supports contains following peripherals which are tested and
> known to work:
>
> 1. Debug serial via UART2
> 2. SD card
> 3. Ethernet
>
> More information about this board can be found in arrow website:
> https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
Looks like this patch has fallen through the cracks! Let me know if I have
to resend it (again).
Thanks,
Mani
> ---
> arch/arm/mach-imx/imx8/Kconfig | 6 ++
> board/einfochips/imx8qxp_ai_ml/Kconfig | 21 ++++
> board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 ++
> board/einfochips/imx8qxp_ai_ml/Makefile | 8 ++
> board/einfochips/imx8qxp_ai_ml/README | 49 ++++++++++
> .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 78 +++++++++++++++
> board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 +++++
> board/einfochips/imx8qxp_ai_ml/spl.c | 39 ++++++++
> configs/imx8qxp_ai_ml_defconfig | 83 ++++++++++++++++
> include/configs/imx8qxp_ai_ml.h | 95 +++++++++++++++++++
> 10 files changed, 409 insertions(+)
> create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
> create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
> create mode 100644 board/einfochips/imx8qxp_ai_ml/README
> create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
> create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
> create mode 100644 configs/imx8qxp_ai_ml_defconfig
> create mode 100644 include/configs/imx8qxp_ai_ml.h
>
> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
> index cdb78afacf..25fe4e2be0 100644
> --- a/arch/arm/mach-imx/imx8/Kconfig
> +++ b/arch/arm/mach-imx/imx8/Kconfig
> @@ -55,6 +55,11 @@ config TARGET_COLIBRI_IMX8X
> select BOARD_LATE_INIT
> select IMX8QXP
>
> +config TARGET_IMX8QXP_AI_ML
> + bool "Support i.MX8QXP AI_ML board"
> + select BOARD_EARLY_INIT_F
> + select IMX8QXP
> +
> config TARGET_IMX8QM_MEK
> bool "Support i.MX8QM MEK board"
> select BOARD_LATE_INIT
> @@ -73,6 +78,7 @@ config TARGET_IMX8QXP_MEK
>
> endchoice
>
> +source "board/einfochips/imx8qxp_ai_ml/Kconfig"
> source "board/freescale/imx8qm_mek/Kconfig"
> source "board/freescale/imx8qxp_mek/Kconfig"
> source "board/advantech/imx8qm_rom7720_a1/Kconfig"
> diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig
> new file mode 100644
> index 0000000000..b6806b8859
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig
> @@ -0,0 +1,21 @@
> +if TARGET_IMX8QXP_AI_ML
> +
> +config SYS_BOARD
> + default "imx8qxp_ai_ml"
> +
> +config SYS_VENDOR
> + default "einfochips"
> +
> +config SYS_CONFIG_NAME
> + default "imx8qxp_ai_ml"
> +
> +config SYS_MALLOC_LEN
> + default 0x2400000
> +
> +config ENV_SIZE
> + default 0x1000
> +
> +config ENV_OFFSET
> + default 0x400000
> +
> +endif
> diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> new file mode 100644
> index 0000000000..add0bd9431
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> @@ -0,0 +1,6 @@
> +i.MX8QXP AI_ML BOARD
> +M: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> +S: Maintained
> +F: board/einfochips/imx8qxp_ai_ml/
> +F: include/configs/imx8qxp_ai_ml.h
> +F: configs/imx8qxp_ai_ml_defconfig
> diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile
> new file mode 100644
> index 0000000000..e08774dc6e
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# Copyright 2019 Linaro Ltd.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += imx8qxp_ai_ml.o
> +obj-$(CONFIG_SPL_BUILD) += spl.o
> diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README
> new file mode 100644
> index 0000000000..488920580f
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/README
> @@ -0,0 +1,49 @@
> +U-Boot for the Einfochips i.MX8QXP AI_ML board
> +
> +Quick Start
> +===========
> +
> +- Get and Build the ARM Trusted firmware
> +- Get scfw_tcm.bin and ahab-container.img
> +- Build U-Boot
> +- Flash the binary into the SD card
> +- Boot
> +
> +Get and Build the ARM Trusted firmware
> +======================================
> +
> +$ git clone https://source.codeaurora.org/external/imx/imx-atf
> +$ cd imx-atf/
> +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2
> +$ make PLAT=imx8qxp bl31
> +
> +Get scfw_tcm.bin and ahab-container.img
> +=======================================
> +
> +$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin
> +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin
> +$ chmod +x firmware-imx-8.1.bin
> +$ ./firmware-imx-8.1.bin
> +
> +Copy the following binaries to U-Boot folder:
> +
> +$ cp imx-atf/build/imx8qxp/release/bl31.bin .
> +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img .
> +
> +Build U-Boot
> +============
> +
> +$ make imx8qxp_ai_ml_defconfig
> +$ make u-boot-dtb.imx
> +
> +Flash the binary into the SD card
> +=================================
> +
> +Burn the u-boot-dtb.imx binary to SD card offset 32KB:
> +
> +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
> +
> +Boot
> +====
> +
> +Set Boot switch SW2: 1100.
> diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> new file mode 100644
> index 0000000000..465fea65f8
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
> + * Copyright 2019 Linaro Ltd.
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <linux/libfdt.h>
> +#include <fsl_esdhc.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sci/sci.h>
> +#include <asm/arch/imx8-pins.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/sys_proto.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int board_early_init_f(void)
> +{
> + sc_pm_clock_rate_t rate = SC_80MHZ;
> + int ret;
> +
> + /* Set UART2 clock root to 80 MHz */
> + ret = sc_pm_setup_uart(SC_R_UART_2, rate);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_FEC_MXC)
> +#include <miiphy.h>
> +
> +int board_phy_config(struct phy_device *phydev)
> +{
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
> +
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
> +
> + if (phydev->drv->config)
> + phydev->drv->config(phydev);
> +
> + return 0;
> +}
> +#endif
> +
> +int checkboard(void)
> +{
> + puts("Board: iMX8QXP AI_ML\n");
> +
> + build_info();
> + print_bootinfo();
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> +
> +/* Board specific reset that is system reset */
> +
> +void reset_cpu(ulong addr)
> +{
> + /* TODO */
> +}
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +int ft_board_setup(void *blob, bd_t *bd)
> +{
> + return 0;
> +}
> +#endif
> diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
> new file mode 100644
> index 0000000000..4fc5ade313
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2018 NXP
> + *
> + * Refer doc/README.imx8image for more details about how-to configure
> + * and create imx8image boot image
> + */
> +
> +#define __ASSEMBLY__
> +
> +/* Boot from SD, sector size 0x400 */
> +BOOT_FROM SD 0x400
> +/* SoC type IMX8QX */
> +SOC_TYPE IMX8QX
> +/* Append seco container image */
> +APPEND mx8qx-ahab-container.img
> +/* Create the 2nd container */
> +CONTAINER
> +/* Add scfw image with exec attribute */
> +IMAGE SCU mx8qx-aiml-scfw-tcm.bin
> +/* Add ATF image with exec attribute */
> +IMAGE A35 bl31.bin 0x80000000
> +/* Add U-Boot image with load attribute */
> +DATA A35 u-boot-dtb.bin 0x80020000
> diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c
> new file mode 100644
> index 0000000000..2e6e0741e5
> --- /dev/null
> +++ b/board/einfochips/imx8qxp_ai_ml/spl.c
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
> + * Copyright 2019 Linaro Ltd.
> + *
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <spl.h>
> +#include <dm/uclass.h>
> +#include <dm/device.h>
> +#include <dm/uclass-internal.h>
> +#include <dm/device-internal.h>
> +#include <dm/lists.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void spl_board_init(void)
> +{
> + arch_cpu_init();
> +
> + timer_init();
> +
> + preloader_console_init();
> +
> + puts("Normal Boot\n");
> +}
> +
> +void board_init_f(ulong dummy)
> +{
> + /* Clear global data */
> + memset((void *)gd, 0, sizeof(gd_t));
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + board_init_r(NULL, 0);
> +}
> diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig
> new file mode 100644
> index 0000000000..e20a0c783e
> --- /dev/null
> +++ b/configs/imx8qxp_ai_ml_defconfig
> @@ -0,0 +1,83 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_IMX8=y
> +CONFIG_SYS_TEXT_BASE=0x80020000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_TARGET_IMX8QXP_AI_ML=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=4
> +CONFIG_SPL=y
> +CONFIG_FIT=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg"
> +CONFIG_BOOTDELAY=3
> +CONFIG_LOG=y
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_POWER_SUPPORT=y
> +CONFIG_SPL_POWER_DOMAIN=y
> +CONFIG_SPL_WATCHDOG_SUPPORT=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_CPU=y
> +# CONFIG_CMD_IMPORTENV is not set
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_FUSE=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_FAT_WRITE=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_CLK=y
> +CONFIG_CLK_IMX8=y
> +CONFIG_CPU=y
> +CONFIG_DM_GPIO=y
> +CONFIG_MXC_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_IMX_LPI2C=y
> +CONFIG_MISC=y
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_ADDR_ENABLE=y
> +CONFIG_PHY_ATHEROS=y
> +CONFIG_DM_ETH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_FEC_MXC_SHARE_MDIO=y
> +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
> +CONFIG_FEC_MXC=y
> +CONFIG_MII=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_IMX8=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_IMX8_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_SPL_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR_GPIO=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_FSL_LPUART=y
> +CONFIG_SPL_TINY_MEMSET=y
> +# CONFIG_EFI_LOADER is not set
> diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h
> new file mode 100644
> index 0000000000..bdac710103
> --- /dev/null
> +++ b/include/configs/imx8qxp_ai_ml.h
> @@ -0,0 +1,95 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2018 NXP
> + * Copyright 2019 Linaro Ltd.
> + */
> +
> +#ifndef __IMX8QXP_AI_ML_H
> +#define __IMX8QXP_AI_ML_H
> +
> +#include <linux/sizes.h>
> +#include <asm/arch/imx-regs.h>
> +
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K)
> +#define CONFIG_SYS_MONITOR_LEN (SZ_1K * SZ_1K)
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250
> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
> +
> +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
> +#define CONFIG_SPL_STACK 0x013E000
> +#define CONFIG_SPL_BSS_START_ADDR 0x00128000
> +#define CONFIG_SPL_BSS_MAX_SIZE SZ_4K /* 4 KB */
> +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
> +#define CONFIG_SERIAL_LPUART_BASE 0x5a080000
> +#define CONFIG_MALLOC_F_ADDR 0x00120000
> +
> +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
> +
> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
> +
> +#define CONFIG_OF_SEPARATE
> +#endif
> +
> +#define CONFIG_REMAKE_ELF
> +
> +/* Flat Device Tree Definitions */
> +#define CONFIG_OF_BOARD_SETUP
> +
> +#define CONFIG_FSL_USDHC
> +
> +#define CONFIG_ENV_OVERWRITE
> +
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(MMC, mmc, 1) \
> + func(DHCP, dhcp, na)
> +
> +#include <config_distro_bootcmd.h>
> +/* Initial environment variables */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "console=ttyLP2 earlycon\0" \
> + "fdt_addr_r=0x83000000\0" \
> + "kernel_addr_r=0x81000000\0" \
> + "ramdisk_addr_r=0x94400000\0" \
> + "scriptaddr=0x89000000\0" \
> + "fdtfile=imx8qxp-ai_ml.dtb\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "image=Image\0" \
> + "initrd_addr=0x83800000\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "netargs=setenv bootargs console=${console},${baudrate} " \
> + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
> + "\0" \
> + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
> + "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
> + BOOTENV
> +
> +/* Link Definitions */
> +#define CONFIG_LOADADDR 0x80280000
> +
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
> +
> +/* USDHC2 is the SD card interface */
> +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x80000000
> +#define PHYS_SDRAM_1 0x80000000
> +#define PHYS_SDRAM_2 0x880000000
> +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
> +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
> +
> +/* Generic Timer Definitions */
> +#define COUNTER_FREQUENCY 8000000 /* 8MHz */
> +
> +/* Networking */
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define FEC_QUIRK_ENET_MAC
> +
> +#endif /* __IMX8QXP_AI_ML_H */
> --
> 2.17.1
>
More information about the U-Boot
mailing list