[PATCH v2 07/14] board_f: ppc: Factor out ppc-specific bdinfo setup

[Ovidiu Panait]

Factor out ppc-specific bdinfo setup from generic init sequence to
arch_setup_bdinfo in arch/powerpc/lib/bdinfo.c. Also, use if(IS_ENABLED())
instead of #ifdef where possible.

Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---
v2 updates:
- use "if (IS_ENABLED(CONFIG_SYS_HAS_SRAM))" instead of 
  "#ifdef CONFIG_SYS_SRAM_BASE"

 arch/powerpc/lib/bdinfo.c | 42 +++++++++++++++++++++++++++++++++++++++
 common/board_f.c          | 39 ++----------------------------------
 2 files changed, 44 insertions(+), 37 deletions(-)

diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c
index d8c64155f0..a3c4c143da 100644
--- a/arch/powerpc/lib/bdinfo.c
+++ b/arch/powerpc/lib/bdinfo.c
@@ -11,6 +11,48 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int arch_setup_bdinfo(void)
+{
+	bd_t *bd = gd->bd;
+
+	/*
+	 * Save local variables to board info struct
+	 */
+	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;	/* start of memory */
+	bd->bi_memsize = gd->ram_size;			/* size in bytes */
+
+	if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) {
+		bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */
+		bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;  /* size  of SRAM */
+	}
+
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
+#endif
+
+#if defined(CONFIG_MPC83xx)
+	bd->bi_immrbar = CONFIG_SYS_IMMR;
+#endif
+
+	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
+	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
+
+#if defined(CONFIG_CPM2)
+	bd->bi_cpmfreq = gd->arch.cpm_clk;
+	bd->bi_brgfreq = gd->arch.brg_clk;
+	bd->bi_sccfreq = gd->arch.scc_clk;
+	bd->bi_vco = gd->arch.vco_out;
+#endif /* CONFIG_CPM2 */
+
+#if defined(CONFIG_EXTRA_CLOCK)
+	bd->bi_inpfreq = gd->arch.inp_clk;	/* input Freq in Hz */
+	bd->bi_vcofreq = gd->arch.vco_clk;	/* vco Freq in Hz */
+	bd->bi_flbfreq = gd->arch.flb_clk;	/* flexbus Freq in Hz */
+#endif
+
+	return 0;
+}
+
 void __weak board_detail(void)
 {
 	/* Please define board_detail() for your PPC platform */
diff --git a/common/board_f.c b/common/board_f.c
index 7d65879b93..960a9c83db 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -602,8 +602,7 @@ __weak int arch_setup_bdinfo(void)
 	return 0;
 }
 
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
-	defined(CONFIG_SH)
+#if defined(CONFIG_MIPS) || defined(CONFIG_SH)
 static int setup_board_part1(void)
 {
 	bd_t *bd = gd->bd;
@@ -619,36 +618,6 @@ static int setup_board_part1(void)
 	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;		/* size  of SRAM */
 #endif
 
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
-#endif
-#if defined(CONFIG_MPC83xx)
-	bd->bi_immrbar = CONFIG_SYS_IMMR;
-#endif
-
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_PPC)
-static int setup_board_part2(void)
-{
-	bd_t *bd = gd->bd;
-
-	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
-	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
-#if defined(CONFIG_CPM2)
-	bd->bi_cpmfreq = gd->arch.cpm_clk;
-	bd->bi_brgfreq = gd->arch.brg_clk;
-	bd->bi_sccfreq = gd->arch.scc_clk;
-	bd->bi_vco = gd->arch.vco_out;
-#endif /* CONFIG_CPM2 */
-#if defined(CONFIG_EXTRA_CLOCK)
-	bd->bi_inpfreq = gd->arch.inp_clk;	/* input Freq in Hz */
-	bd->bi_vcofreq = gd->arch.vco_clk;	/* vco Freq in Hz */
-	bd->bi_flbfreq = gd->arch.flb_clk;	/* flexbus Freq in Hz */
-#endif
-
 	return 0;
 }
 #endif
@@ -974,13 +943,9 @@ static const init_fnc_t init_sequence_f[] = {
 	dram_init_banksize,
 	show_dram_config,
 	arch_setup_bdinfo,
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
-	defined(CONFIG_SH)
+#if defined(CONFIG_MIPS) || defined(CONFIG_SH)
 	setup_board_part1,
-#endif
-#if defined(CONFIG_PPC)
 	INIT_FUNC_WATCHDOG_RESET
-	setup_board_part2,
 #endif
 	display_new_sp,
 #ifdef CONFIG_OF_BOARD_FIXUP
-- 
2.17.1