[PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction

Patrice CHOTARD patrice.chotard at st.com
Thu Jul 2 09:51:24 CEST 2020


Hi Patrick

On 6/4/20 2:30 PM, Patrick Delaunay wrote:
> Move the functions stmfx_pinctrl_set_pupd and stmfx_pinctrl_set_type;
> they can be used by the new ops get_dir_flags and set_dir_flags introduced
> by next patch.
>
> No functional change.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
> Changes in v2:
> - NEW: split previous patch [5/5] gpio: stmfx: add set_config ops
>
>  drivers/pinctrl/pinctrl-stmfx.c | 60 ++++++++++++++++-----------------
>  1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
> index a3240ccd5a..d74121725c 100644
> --- a/drivers/pinctrl/pinctrl-stmfx.c
> +++ b/drivers/pinctrl/pinctrl-stmfx.c
> @@ -74,6 +74,36 @@ static int stmfx_write(struct udevice *dev, uint offset, unsigned int val)
>  	return dm_i2c_reg_write(dev_get_parent(dev), offset, val);
>  }
>  
> +static int stmfx_pinctrl_set_pupd(struct udevice *dev,
> +				  unsigned int pin, u32 pupd)
> +{
> +	u8 reg = STMFX_REG_GPIO_PUPD + get_reg(pin);
> +	u32 mask = get_mask(pin);
> +	int ret;
> +
> +	ret = stmfx_read(dev, reg);
> +	if (ret < 0)
> +		return ret;
> +	ret = (ret & ~mask) | (pupd ? mask : 0);
> +
> +	return stmfx_write(dev, reg, ret);
> +}
> +
> +static int stmfx_pinctrl_set_type(struct udevice *dev,
> +				  unsigned int pin, u32 type)
> +{
> +	u8 reg = STMFX_REG_GPIO_TYPE + get_reg(pin);
> +	u32 mask = get_mask(pin);
> +	int ret;
> +
> +	ret = stmfx_read(dev, reg);
> +	if (ret < 0)
> +		return ret;
> +	ret = (ret & ~mask) | (type ? mask : 0);
> +
> +	return stmfx_write(dev, reg, ret);
> +}
> +
>  static int stmfx_gpio_get(struct udevice *dev, unsigned int offset)
>  {
>  	u32 reg = STMFX_REG_GPIO_STATE + get_reg(offset);
> @@ -190,36 +220,6 @@ static const struct pinconf_param stmfx_pinctrl_conf_params[] = {
>  	{ "output-low", PIN_CONFIG_OUTPUT, 0 },
>  };
>  
> -static int stmfx_pinctrl_set_pupd(struct udevice *dev,
> -				  unsigned int pin, u32 pupd)
> -{
> -	u8 reg = STMFX_REG_GPIO_PUPD + get_reg(pin);
> -	u32 mask = get_mask(pin);
> -	int ret;
> -
> -	ret = stmfx_read(dev, reg);
> -	if (ret < 0)
> -		return ret;
> -	ret = (ret & ~mask) | (pupd ? mask : 0);
> -
> -	return stmfx_write(dev, reg, ret);
> -}
> -
> -static int stmfx_pinctrl_set_type(struct udevice *dev,
> -				  unsigned int pin, u32 type)
> -{
> -	u8 reg = STMFX_REG_GPIO_TYPE + get_reg(pin);
> -	u32 mask = get_mask(pin);
> -	int ret;
> -
> -	ret = stmfx_read(dev, reg);
> -	if (ret < 0)
> -		return ret;
> -	ret = (ret & ~mask) | (type ? mask : 0);
> -
> -	return stmfx_write(dev, reg, ret);
> -}
> -
>  static int stmfx_pinctrl_conf_set(struct udevice *dev, unsigned int pin,
>  				  unsigned int param, unsigned int arg)
>  {

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks


More information about the U-Boot mailing list