[PATCH 01/16] ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux
Kever Yang
kever.yang at rock-chips.com
Tue Jul 21 05:14:30 CEST 2020
On 2020/7/21 上午2:51, Jagan Teki wrote:
> Sync ROCKPi N8/N10 dts(i) changes from Linux.
>
> commit <afd9eb880414> ("ARM: dts: rockchip: Add Radxa Rock Pi N8 initial
> support")
>
> Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3288-rock-pi-n8.dts | 2 +-
> arch/arm/dts/rk3288-vmarc-som.dtsi | 80 ++++++-----------
> arch/arm/dts/rk3399pro-rock-pi-n10.dts | 6 +-
> arch/arm/dts/rk3399pro-vmarc-som.dtsi | 87 +++++++++----------
> .../dts/rockchip-radxa-dalang-carrier.dtsi | 65 +++++++-------
> 5 files changed, 104 insertions(+), 136 deletions(-)
>
> diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts b/arch/arm/dts/rk3288-rock-pi-n8.dts
> index c8637a50c1..c9894a60e7 100644
> --- a/arch/arm/dts/rk3288-rock-pi-n8.dts
> +++ b/arch/arm/dts/rk3288-rock-pi-n8.dts
> @@ -7,8 +7,8 @@
>
> /dts-v1/;
> #include "rk3288.dtsi"
> -#include "rk3288-vmarc-som.dtsi"
> #include <rockchip-radxa-dalang-carrier.dtsi>
> +#include "rk3288-vmarc-som.dtsi"
>
> / {
> model = "Radxa ROCK Pi N8";
> diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi
> index 3cffe61cdf..7a9fd40e5b 100644
> --- a/arch/arm/dts/rk3288-vmarc-som.dtsi
> +++ b/arch/arm/dts/rk3288-vmarc-som.dtsi
> @@ -7,35 +7,17 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/pwm/pwm.h>
>
> / {
> compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
>
> - ext_gmac: external-gmac-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "ext_gmac";
> - #clock-cells = <0>;
> - };
> -
> vccio_flash: vccio-flash-regulator {
> compatible = "regulator-fixed";
> regulator-name = "vccio_flash";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - startup-delay-us = <150>;
> vin-supply = <&vcc_io>;
> };
> -
> - vcc_sys: vsys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sys";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> };
>
> &emmc {
> @@ -45,23 +27,15 @@
> non-removable;
> pinctrl-names = "default";
> pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vccio_flash>;
> status = "okay";
> };
>
> &gmac {
> assigned-clocks = <&cru SCLK_MAC>;
> - assigned-clock-parents = <&ext_gmac>;
> - clock_in_out = "input";
> - phy-mode = "rgmii";
> phy-supply = <&vcc_io>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&rgmii_pins>;
> snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
> - snps,reset-active-low;
> - snps,reset-delays-us = <0 10000 50000>;
> - tx_delay = <0x30>;
> - rx_delay = <0x10>;
> - max-speed = <1000>;
> };
>
> &i2c0 {
> @@ -80,37 +54,37 @@
> #clock-cells = <1>;
> clock-output-names = "rk808-clkout1", "rk808-clkout2";
>
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc6-supply = <&vcc_sys>;
> - vcc7-supply = <&vcc_sys>;
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> vcc8-supply = <&vcc_io>;
> vcc9-supply = <&vcc_io>;
> - vcc10-supply = <&vcc_sys>;
> - vcc11-supply = <&vcc_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc5v0_sys>;
> vcc12-supply = <&vcc_io>;
> vddio-supply = <&vcc_io>;
>
> regulators {
> vdd_cpu: DCDC_REG1 {
> + regulator-name = "vdd_arm";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <750000>;
> regulator-max-microvolt = <1400000>;
> - regulator-name = "vdd_arm";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> };
>
> vdd_gpu: DCDC_REG2 {
> + regulator-name = "vdd_gpu";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <850000>;
> regulator-max-microvolt = <1250000>;
> - regulator-name = "vdd_gpu";
> regulator-ramp-delay = <6000>;
> regulator-state-mem {
> regulator-off-in-suspend;
> @@ -118,20 +92,20 @@
> };
>
> vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> regulator-always-on;
> regulator-boot-on;
> - regulator-name = "vcc_ddr";
> regulator-state-mem {
> regulator-on-in-suspend;
> };
> };
>
> vcc_io: DCDC_REG4 {
> + regulator-name = "vcc_io";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc_io";
> regulator-state-mem {
> regulator-on-in-suspend;
> regulator-suspend-microvolt = <3300000>;
> @@ -139,22 +113,22 @@
> };
>
> vcc_tp: LDO_REG1 {
> + regulator-name = "vcc_tp";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc_tp";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> };
>
> vcca_codec: LDO_REG2 {
> + regulator-name = "vcca_codec";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> - regulator-name = "vcca_codec";
> regulator-state-mem {
> regulator-on-in-suspend;
> regulator-suspend-microvolt = <3300000>;
> @@ -162,11 +136,11 @@
> };
>
> vdd_10: LDO_REG3 {
> + regulator-name = "vdd_10";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1000000>;
> regulator-max-microvolt = <1000000>;
> - regulator-name = "vdd_10";
> regulator-state-mem {
> regulator-on-in-suspend;
> regulator-suspend-microvolt = <1000000>;
> @@ -174,22 +148,22 @@
> };
>
> vcc_wl: LDO_REG4 {
> + regulator-name = "vcc_wl";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc_wl";
> regulator-state-mem {
> regulator-on-in-suspend;
> };
> };
>
> vccio_sd: LDO_REG5 {
> + regulator-name = "vccio_sd";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_sd";
> regulator-state-mem {
> regulator-on-in-suspend;
> regulator-suspend-microvolt = <3300000>;
> @@ -197,22 +171,22 @@
> };
>
> vdd10_lcd: LDO_REG6 {
> + regulator-name = "vdd10_lcd";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1000000>;
> regulator-max-microvolt = <1000000>;
> - regulator-name = "vdd10_lcd";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> };
>
> vcc_18: LDO_REG7 {
> + regulator-name = "vcc_18";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc_18";
> regulator-state-mem {
> regulator-on-in-suspend;
> regulator-suspend-microvolt = <1800000>;
> @@ -220,29 +194,29 @@
> };
>
> vcc18_lcd: LDO_REG8 {
> + regulator-name = "vcc18_lcd";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc18_lcd";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> };
>
> vcc_sd: SWITCH_REG1 {
> + regulator-name = "vcc_sd";
> regulator-always-on;
> regulator-boot-on;
> - regulator-name = "vcc_sd";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> };
>
> vcc_lcd: SWITCH_REG2 {
> + regulator-name = "vcc_lcd";
> regulator-always-on;
> regulator-boot-on;
> - regulator-name = "vcc_lcd";
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> @@ -277,13 +251,11 @@
> };
>
> sdmmc_clk: sdmmc-clk {
> - rockchip,pins =
> - <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
> + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
> };
>
> sdmmc_cmd: sdmmc-cmd {
> - rockchip,pins =
> - <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
> + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
> };
> };
> };
> diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/arch/arm/dts/rk3399pro-rock-pi-n10.dts
> index 6ac2d4d721..bf026786fa 100644
> --- a/arch/arm/dts/rk3399pro-rock-pi-n10.dts
> +++ b/arch/arm/dts/rk3399pro-rock-pi-n10.dts
> @@ -8,11 +8,15 @@
> /dts-v1/;
> #include "rk3399.dtsi"
> #include "rk3399-opp.dtsi"
> -#include "rk3399pro-vmarc-som.dtsi"
> #include <rockchip-radxa-dalang-carrier.dtsi>
> +#include "rk3399pro-vmarc-som.dtsi"
>
> / {
> model = "Radxa ROCK Pi N10";
> compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
> "rockchip,rk3399pro";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> };
> diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> index 6fd17e8a81..37ed95d5f7 100644
> --- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> +++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> @@ -11,32 +11,6 @@
>
> / {
> compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
> -
> - clkin_gmac: external-gmac-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "clkin_gmac";
> - #clock-cells = <0>;
> - };
> -
> - vcc12v_dcin: vcc12v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> };
>
> &cpu_l0 {
> @@ -61,23 +35,14 @@
>
> &gmac {
> assigned-clocks = <&cru SCLK_RMII_SRC>;
> - assigned-clock-parents = <&clkin_gmac>;
> - clock_in_out = "input";
> phy-supply = <&vcc_lan>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&rgmii_pins>;
> snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - snps,reset-delays-us = <0 10000 50000>;
> - tx_delay = <0x28>;
> - rx_delay = <0x11>;
> };
>
> &i2c0 {
> clock-frequency = <400000>;
> - i2c-scl-rising-time-ns = <180>;
> i2c-scl-falling-time-ns = <30>;
> + i2c-scl-rising-time-ns = <180>;
> status = "okay";
>
> rk809: pmic at 20 {
> @@ -297,11 +262,48 @@
> };
> };
>
> +&i2c1 {
> + i2c-scl-falling-time-ns = <30>;
> + i2c-scl-rising-time-ns = <140>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + hym8563: hym8563 at 51 {
> + compatible = "haoyu,hym8563";
> + reg = <0x51>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "hym8563";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hym8563_int>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> &io_domains {
> status = "okay";
> bt656-supply = <&vcca_1v8>;
> - sdmmc-supply = <&vccio_sd>;
> gpio1830-supply = <&vccio_3v0>;
> + sdmmc-supply = <&vccio_sd>;
> +};
> +
> +&pinctrl {
> + hym8563 {
> + hym8563_int: hym8563-int {
> + rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
> + };
> + };
> };
>
> &pmu_io_domains {
> @@ -323,16 +325,7 @@
> };
>
> &tsadc {
> - status = "okay";
> rockchip,hw-tshut-mode = <1>;
> rockchip,hw-tshut-polarity = <1>;
> -};
> -
> -&pinctrl {
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins =
> - <1 RK_PC2 0 &pcfg_pull_up>;
> - };
> - };
> + status = "okay";
> };
> diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> index 3e54f38f0a..450e5bb5af 100644
> --- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> +++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> @@ -8,36 +8,44 @@
> #include <dt-bindings/pwm/pwm.h>
>
> / {
> - chosen {
> - stdout-path = "serial2:1500000n8";
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> };
> -};
>
> -&gmac {
> - status = "okay";
> -};
> + vcc12v_dcin: vcc12v-dcin-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
>
> -&i2c1 {
> - status = "okay";
> - i2c-scl-rising-time-ns = <140>;
> - i2c-scl-falling-time-ns = <30>;
> + vcc5v0_sys: vcc5v0-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> };
>
> -&i2c2 {
> +&gmac {
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> status = "okay";
> - clock-frequency = <400000>;
> -
> - hym8563: hym8563 at 51 {
> - compatible = "haoyu,hym8563";
> - reg = <0x51>;
> - #clock-cells = <0>;
> - clock-frequency = <32768>;
> - clock-output-names = "hym8563";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hym8563_int>;
> - interrupt-parent = <&gpio4>;
> - interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> - };
> };
>
> &pwm0 {
> @@ -68,12 +76,3 @@
> &uart2 {
> status = "okay";
> };
> -
> -&pinctrl {
> - hym8563 {
> - hym8563_int: hym8563-int {
> - rockchip,pins =
> - <4 RK_PD6 0 &pcfg_pull_up>;
> - };
> - };
> -};
More information about the U-Boot
mailing list