[PATCH 1/5] mtd: spi: Drop redundent SPI flash driver
Vignesh Raghavendra
vigneshr at ti.com
Mon Jul 13 10:32:44 CEST 2020
Hi Jagan,
$subject: s/redundent/redundant
On 09/07/20 4:47 pm, Jagan Teki wrote:
> ---
[...]
> index b09046fec3..44cdb3151d 100644
> --- a/drivers/mtd/spi/sf-uclass.c
> +++ b/drivers/mtd/spi/sf-uclass.c
> @@ -122,7 +122,7 @@ static int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len)
> return mtd->_erase(mtd, &instr);
> }
>
> -int spi_flash_std_probe(struct udevice *dev)
> +static int spi_flash_std_probe(struct udevice *dev)
> {
> struct spi_slave *slave = dev_get_parent_priv(dev);
> struct spi_flash *flash;
> @@ -164,6 +164,32 @@ static int spi_flash_std_remove(struct udevice *dev)
> return 0;
> }
>
> +/*
> + * Manually set the parent of the SPI flash to SPI, since dtoc doesn't. We also
> + * need to allocate the parent_platdata since by the time this function is
> + * called device_bind() has already gone past that step.
> + */
> +static int spi_flash_std_bind(struct udevice *dev)
> +{
> + if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
> + struct dm_spi_slave_platdata *plat;
> + struct udevice *spi;
> + int ret;
> +
> + ret = uclass_first_device_err(UCLASS_SPI, &spi);
> + if (ret)
> + return ret;
> + dev->parent = spi;
Hmm... How does this association work in case of multiple flash devices
in the system on multiple SPI buses? Seems like fixup works only for
first SPI bus?
Regards
Vignesh
> +
> + plat = calloc(sizeof(*plat), 1);
> + if (!plat)
> + return -ENOMEM;
> + dev->parent_platdata = plat;
> + }
> +
> + return 0;
> +}
> +
> static const struct dm_spi_flash_ops spi_flash_std_ops = {
> .read = spi_flash_std_read,
> .write = spi_flash_std_write,
> @@ -180,6 +206,7 @@ U_BOOT_DRIVER(spi_flash_std) = {
> .id = UCLASS_SPI_FLASH,
> .of_match = spi_flash_std_ids,
> .probe = spi_flash_std_probe,
> + .bind = spi_flash_std_bind,
> .remove = spi_flash_std_remove,
> .priv_auto_alloc_size = sizeof(struct spi_flash),
> .ops = &spi_flash_std_ops,
> diff --git a/include/spi_flash.h b/include/spi_flash.h
> index 41cf4b0670..24759944eb 100644
> --- a/include/spi_flash.h
> +++ b/include/spi_flash.h
> @@ -75,18 +75,6 @@ int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
> */
> int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
>
> -/**
> - * spi_flash_std_probe() - Probe a SPI flash device
> - *
> - * This is the standard internal method for probing a SPI flash device to
> - * determine its type. It can be used in chip-specific drivers which need to
> - * do this, typically with of-platdata
> - *
> - * @dev: SPI-flash device to probe
> - * @return 0 if OK, -ve on error
> - */
> -int spi_flash_std_probe(struct udevice *dev);
> -
> static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
> size_t len, void *buf)
> {
>
More information about the U-Boot
mailing list