[PATCH] xilinx: Setup bootm variables

[Michal Simek]

pá 10. 7. 2020 v 13:20 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> On system with PL DDR which is placed before PS DDR in DT
> env_get_bootm_size() and env_get_bootm_low() without specifying bootm_low
> and bootm_size variables are taking by default gd->bd->bi_dram[0].start and
> gd->bd->bi_dram[0].size. As you see 0 means bank 0 which doesn't need to be
> PS ddr and even can be memory above 39bit VA which is what U-Boot supports
> now.
> That's why setup bootm variables based on ram_base/ram_size setting to make
> sure that boot images are placed to the same location as U-Boot is placed.
> This location should be by default location where OS can boot from.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  board/xilinx/common/board.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
> index 0469e2e7ac9b..3bca3a25a97b 100644
> --- a/board/xilinx/common/board.c
> +++ b/board/xilinx/common/board.c
> @@ -86,5 +86,8 @@ int board_late_init_xilinx(void)
>         initrd_hi = round_down(initrd_hi, SZ_16M);
>         env_set_addr("initrd_high", (void *)initrd_hi);
>
> +       env_set_addr("bootm_low", (void *)gd->ram_base);
> +       env_set_addr("bootm_size", (void *)gd->ram_size);
> +
>         return 0;
>  }
> --
> 2.27.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs